Autonomous ErgoChair User manual

OVERALL SIZE
UNIT:MM
450
650
820-680
545-480
1315-1180
670
480
ABCDx5
EFG
IX4
JX3
KX7
NX7
OX8
PX8
MX1
(M8*25MM)
(M6*22MM)
(M6*35MM)
( Ø6*14*1.5MM)
( Ø8*17*1.5MM)
(M8)
LX5 (M8*60MM)
H
PART LISE
1
735

D
F
E
2
Step 1 Step 2
Step 4Step 3
Push the handle and the
mechanism to the end following
the arrow direction at the same
time,so the screw holes appear.

3
Step 5 Step 6
Step 7 Step 8
Keep the holes in the metal bar in
line with the plywood before
assembling the back,then tighten
the screws that are diagonal to
each other halfway.
Tighten another two screws in the
metal bar.

6
45 degrees adjustment 70mm up and down
30mm left
and right
70mm up and down
40mm front and back

WARNING
Failure to follow these instructions may result in serious injury.
1.This product is designed for seating only do not stand on
this product. Do not use it as a step ladder.
2.Do not use this product unless all bolts and parts are firmly
tightened.
3.If any parts are missing, damaged or worn ,stop using this
product. Repair the product with the replacement parts from
manufacturer .
4.Do not sit on the armrest of this product.
5.This product is designed for one person sitting at a time .
6.Keep out of reach of children under the age of 10 unless
assistance from an adult is provided .
7

325 W 38th St Floor14 New York NY 10018
www.autonomous.ai
[email protected]
V1.1
8