Autonomous MyoChair User manual

Assembly Instructions

OVERALL SIZE
Front view
26”
19”
18”- 22”
24”- 28”
Side view
24
45”- 49”
25.5”
16.5”
18.5”
27.5”

Base x 1
Casters x 5
Gas lift x 1
Seat x 1
Armrest x 1
Leg rest x 1
Mechanism x 1
A
B
C
D
E
F
G
Backrest x 1
Headrest x 1
Speed Wrench x 1
Washers large (M8x22x2) x 3
Washers small (M6x15 x1.5) x 10
Spring washers M8 x 3
H
I
J
K
L
M
NSpring washers M6 x 10
Machine screws (M8x55) x 3
Machine screws (M6x55) x 2
Machine screws (M6x40) x 8
Machine screws (M6x8) x 2
Screws M5 x 2
O
P
Q
R
S
Screwdriver x 1 (with Gas lift)
T
A
J K L M
NOP Q
R S
B C
D E F
G H I
PART LIST
COMPONENTS
HARDWARE/ TOOLS
T
(Optional)
(Optional)
MyoChair • [phone] • www.autonomous.ai • [email protected]

Step 1
Step 3 Step 4
Step 2
C
Q
D
F
E
L
N
For full-option MyoChair, please follow Step 4 and Step 5 to install the leg rest before
tightening the mechanism to the seat. Otherwise, please skip these two steps if you
own a basic MyoChair.
Screws pre-installed on the leg rest.
Insert 5 Wheels to the holes on each
prong of chair Base.
MyoChair • [phone] • www.autonomous.ai • [email protected]
A
B

Step 5
Step 7 Step 8
Step 6
P
L
N
H
O
M
K
Prepare the combo of P + N + L.
Tighten another two screws remaining
in the metal bar.
The R screws are ready on the leg rest.
Slot the base of the leg rest through the
support bracket, and tighten the screws
into place.
R
G
Q
L
N
Prepare the combo of Q + N + L.
Tighten the combo into the metal bar and
the seat bottom.
MyoChair • [phone] • www.autonomous.ai • [email protected]
Prepare the combo of O + M + K.
Tighten three O screws, connect the
metal bar with the base of the backrest.

MyoChair • [phone] • www.autonomous.ai • [email protected]
S
T
I
Step 9 Step 10
For full-option MyoChair, please follow
Step 9 to install the headrest to back-
rest.
Congratulations! You’ve done the assembly. Enjoy your MyoChair now.
From the top, lift down slightly the seat
into the base, connect by the center
hole.
The screws are ready
on the headrest.
Tighten the screws
when it is in position.
Function
Right side.
Pull the handle
up to adjust the
seat height.
Left side.
This handle controls
the backrest’s angle.
Pull up: release
Push down: lock

Function
Rotate the leg rest
clockwise before use.
Pull the leg rest out.
MyoChair • [phone] • www.autonomous.ai • [email protected]
3” up and down
3” up and down
25 degrees
adjustment

FAILURE TO FOLLOW THESE INSTRUCTIONS
MAY RESULT IN INJURY.
WARNING
1. This product is designed for seating only, do not stand on
this product. Do not use it as a step ladder.
2. Do not use this product unless all bolts and parts are firmly
tightened.
3. If any parts are missing, damaged or worn, stop using this
product. Repair the product with the replacement parts from
manufacturer.
4. Do not sit on the armest of this product.
5. This product is designed for one person sitting at a time.
6. Keep out of reach of children under the age of 10 unless
assistance from an adult is provided.
MyoChair • [phone] • www.autonomous.ai • [email protected]

Autonomous-Smart office
[phone]
Smart Office
9469-5 Opal Ave - Mentone, CA 92359
www.autonomous.ai
[email protected]