Avalue Technology RITY153 User manual

Part No. E2017RT53A0R
RITY153
15” XGA Flat Touch Panel PC Intel® Atom™ Processor with
Intel® Valleyview SoC
Quick Reference Guide
1st Ed –19 February 2019
Copyright Notice
Copyright 2019 Avalue Technology Inc., ALL RIGHTS RESERVED.

RITY153
2 RITY153 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

Quick Reference Guide
RITY153 Quick Reference Guide
3
Content
1. Getting Started ........................................................................................................4
1.1 Safety Precautions....................................................................................................4
1.2 Packing List...............................................................................................................4
1.3 System Specifications...............................................................................................5
1.4 System Overview......................................................................................................9
1.4.1 Right View................................................................................................................................ 9
1.4.2 Bottom View............................................................................................................................. 9
1.5 System Dimensions ................................................................................................10
1.6 Stand Dimensions...................................................................................................11
1.7 Panel + Stand Dimensions......................................................................................13
2. Hardware Configuration .......................................................................................15
2.1 RITY153 connector mapping ..................................................................................16
2.1.1 External Serial Port 1 connector (COM1).............................................................................. 16
2.1.2 External Serial Port 2 connector (COM2).............................................................................. 17
2.1.3 External Serial Port 3 connector (COM3).............................................................................. 18
2.1.4 VGA connector (VGA) ........................................................................................................... 18
2.2 Installing Battery(Optional).......................................................................................19

RITY153
4 RITY153 Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x RITY Series Panel PC
1 x Power Adapter
1 x Power Cord
1 x Stand (option)

Quick Reference Guide
RITY153 Quick Reference Guide
5
1.3 System Specifications
Component
Mother Board
Intel® Celeron® Apollo Lake Platform
CPU
Intel® Celeron® Processor N3350
Memory
Default 1 x 204-pin SODIMM Socket with 4GB DDR3L
Optional to 8GB
Adapter
DC 24V power input by Power Mini DIN 4P connector
System Fan
Fanless
Speaker
Speaker x2 on back
Camera
Supported optional (ACC-NBCAM-03R)
Operating System
Windows 10 64bit
MSR
Supported optional (E968XRT2200R)
2nd display
Supported 2nd Display by internal VGA(Pin header) +12V
Storage
Hard Disk Drive
2.5” HDD optional (Default 500G)
Solid State Drive
2.5” SSD optional
Other Storage
Device
mSATA by M.2 B key slot optional
Panel
LCD Panel
15” 1024 x 768 XGA CMI G150XGE-L04 C4 400nits (LVDS interface)
(Default)
15” 1024 x 768 XGA CMI G150XNE-L03 300nits (LVDS interface)
15” 1024 x 768 XGA G150XNE-E01 (eDP interface) (optional)
B/L
Inverter/Converter
Panel built in
Touch Screen
Resistive: 5W touch
Capacitive: 15” 2 points touch
Touch Controller
Resistive: PenMount6000
Capacitive: EETI control board
External I/O
Serial Port
4 x COM ports supported ( 2 x Pin header , 2 x Edge I/O )
All Pin 9 supported 5V/12V 1A max output, selected by BIOS.
COM1 & 2: RS232/422/485 selected in BIOS, RS422/485 by standard.
COM3 Pin header
COM4 Pin header
USB Port
10 x USB ports supported
Internal x6
1 x USB 2.0 for resistive touch controller

RITY153
6 RITY153 Quick Reference Guide
1 x USB 2.0 for 2nd display Touch
4 x USB 2.0 Pin header (PH5X2P)
External x4
4 x USB3.0 port (Dual stack)
Video Port
HDMI port
VGA(Ping header) supported 2nd display +12V
Audio Port
Pin header
LAN Port
2 x RJ45 connectors for Dual Giga LAN
Wireless LAN
Antenna
4G Antenna
Switch
Power switch on right side with cover
Indicator Light
Front panel right side with PWR/ HDD/ LAN
Expansion Slots
1 x M.2 B Key slot
Supported 4G/mSATA module
SIM card slot onboard
Battery
Support battery for 10 Minutes (optional)
Others
1 x RJ11 connector for cash drawer
Mechanical
Power Type
DC 19-24V power input
Power Connector
Type
4P Mini DIN
Wafer for Battery charger / Discharger
Dimension
362.1 x 290.1 x 51mm(Without stand)
Weight
TBD
Color
Black/White
Fanless
Fanless
OS Support
Windows 10 64bit
Stand
Power Type
DC 24V power input
Built in adapter
Dimension
TBD
Weight
TBD
Color
Black / White
Reliability
EMI Test
CE/FCC/VCCI : Class B
Safety
All design for this project have to comply with UL / CB / CCC
Dust and Rain
Test
IP 65 for front panel, IP 41 for back
Vibration Test
Follow Avalue standard:
Ramdom Vibration Operation

Quick Reference Guide
RITY153 Quick Reference Guide
7
Reference IEC60068-2-64 Testing procedures
Test Fh : Vibration boardband random Test
1 Test PSD : 0.00454G²/Hz, 0.5 Grms for HDD
Test PSD : 0.00454G²/Hz, 1.5 Grms for mSATA
2 Test frequency : 5 ~ 500 Hz
3 Test axis : X,Y and Z axis
4 Test time : 30 minutes each axis
5 System condition : operation mode
6 Test curve
Sine Vibration Test
Reference IEC60068-2-6 Testing procedures
Test Fc : Vibration sinusoidal
1 Test Acceleration : 2G
2 Test frequency : 5 ~ 500 Hz
3 Sweep：1 Oct/ per one minute. (logarithmic)
4 Test axis : X,Y and Z axis
5 Test time :30 min. each axis
6 System condition : Non-Operating mode
7 Test curve
Package Vibration Test:
Reference IEC60068-2-64 Testing procedures
Test Fh : Vibration boardband random Test
1 Test PSD : 0.026G²/Hz , 2.16 Grms
2 Test frequency : 5~500 Hz
3 Test axis : X,Y and Z axis
4 Test time : 30 minutes each axis
5 Test curve
Mechanical Shock
Test
Follow Avalue standard:
With CF/SSD: 10Grms, IEC 60068-2-27, Half Sine, 11ms
Drop Test
Follow Avalue standard:
Package drop test
Reference ISTA 2A, Method : IEC-60068-2-32 Test:Ed
Test Ea : Drop Test
1 Test phase : One corner, three edges, six faces
2 Test high :
3 Package weight :
4 Test drawing
Operating
0°C ~ 40°C

RITY153
8 RITY153 Quick Reference Guide
Temperature
Operating
Humidity
12hrs operation dwell time at 40°C/80% Relative Humidity, Non-condensing
Storage
Temperature
0°C ~ 60°C
Note: Specifications are subject to change without notice.

Quick Reference Guide
RITY153 Quick Reference Guide
9
1.4 System Overview
1.4.1 Right View
1.4.2 Bottom View
Connectors
Label
Function
Note
COM1/2/3
External Serial Port 1/2 connector (For
RS-232/422/485)
External Serial Port 3 connector (For RS-232)
DB-9 male connector
VGA
VGA connector
C/D
Cash Drawer connector
USB
4 x USB 3.0 connector
1 x USB 2.0 connector
LAN
2 x RJ-45 Ethernet connector
HDMI
HDMI connector
DC-IN
DC Power-in connector
BATTERY
DC Power-out connector
USB

RITY153
10 RITY153 Quick Reference Guide
1.5 System Dimensions
(Unit: mm)