Avantco A440199 User manual

Fence mower
2021 1
Operator's Manual for Attachment
Fence mower
Product number
A440199
English
A444986 2021 1 EN 2020-
www.avanttecno.com

Fence mower 2021 1

Fence mower 2021 1
CONTENTS
1. FOREWORD ........................................................................................................................................ 4
Warning symbols used in this manual ...................................................................................................................................5
2. DESIGNED PURPOSE OF USE.......................................................................................................... 6
3. SAFETY INSTRUCTIONS FOR USING THE FENCE MOWER..................................................... 7
3.1 Personal protective equipment...............................................................................................................................9
3.2 Safe shutdown procedure ........................................................................................................................................9
4. TECHNICAL SPECIFICATIONS ....................................................................................................... 10
4.1 Safety labels and main components of the attachment ....................................................................................11
5. ATTACHING THE ATTACHMENT ................................................................................................. 13
5.1 Connecting and disconnecting hydraulic hoses..................................................................................................14
6. OPERATING THE ATTACHMENT .................................................................................................. 16
6.1 Safety distance.............................................................................................................................................................17
6.2 Checks before use .....................................................................................................................................................18
6.3 Operator qualification...............................................................................................................................................18
6.4 Use .................................................................................................................................................................................19
6.5 Adjustments.................................................................................................................................................................20
6.5.1 Orientation..........................................................................................................................................................20
6.5.2 Floating system ...................................................................................................................................................21
6.5.3 Support wheel.....................................................................................................................................................21
6.5.4 Spring release system........................................................................................................................................22
6.6 Use on slopes..............................................................................................................................................................22
6.7 Removing a blockage .................................................................................................................................................22
6.8 Transport position .....................................................................................................................................................23
6.9 Storage ..........................................................................................................................................................................24
7. MAINTENANCE AND SERVICE ....................................................................................................... 25
7.1 Inspection of hydraulic components .....................................................................................................................25
7.2 Cleaning the attachment...........................................................................................................................................26
7.3 Inspection of metal structures................................................................................................................................26
7.4 Blade maintenance .....................................................................................................................................................26
7.5 Lubrication ...................................................................................................................................................................27
7.6 Assembling the cutting head on the left...............................................................................................................27
7.6.1 Safety instructions for hydraulic assemblies................................................................................................27
7.6.2 Installation............................................................................................................................................................30
7.7 End of life disposal......................................................................................................................................................31
8. WARRANTY TERMS .......................................................................................................................... 32

4 (34)
1. Foreword
Avant Tecno Oy would like to thank you for your purchase of this attachment for your Avant loader. It has
been designed and manufactured based on years of experience on product development and manufacturing.
By familiarizing yourself with this manual and following the instructions, you ascertain your safety and ensure
the reliable operation and long service life of the equipment. Read the instructions carefully before starting to
use the equipment or performing maintenance.
The purpose of this manual is to help you to:
operate the equipment in a safe and efficient manner
observe and prevent any hazardous situations
keep the equipment intact and ensure a long service life
With these instructions, even an inexperienced user can use the attachment and loader safely. The manual
includes important instructions for experienced AVANT operators as well. Ensure that all persons using the
loader have received proper guidance and familiarised themselves with the manual of the loader, each
attachment that are used, and all safety instructions before using the equipment. Using the equipment for
other purposes or use in any other way than described in this manual is prohibited. Keep this manual at hand
throughout the service life of the equipment. If you sell or transfer the equipment, be sure to hand over this
manual to the new owner. If the manual is lost or damaged, you can request a new one from your Avant
dealer or from the manufacturer.
In addition to the safety instructions included in this manual, you must observe all occupational safety
regulations, local laws, and other regulations concerning the use of the equipment. Particularly the regulations
concerning the use of the equipment on public road areas must be observed. Contact your Avant dealer for
more information about local requirements before you operate the loader on road areas.
Contact your local AVANT dealer for any questions, service, spare parts or about any problems that may
occur with the operation of your machine.
This manual contains the original instructions in English. Due to continuous product development some of the
details shown in this manual may differ from your equipment. Pictures may also depict optional equipment or
features that are not currently available. We reserve the right to change the contents of the manual without
notification. Copyright © 2021 Avant Tecno Oy. All rights reserved.

5 (34)
.
Warning symbols used in this manual
The following warning symbols are used throughout this manual. They indicate factors that must be taken into
account to reduce the risk of personal injury or damage to property:
WARNING SAFETY ALERT SYMBOL
This symbol means: “Warning, be alert! Your safety is involved!”
Carefully read the message that follows, it warns of an immediate hazard
that could cause serious personal injury.
The safety alert symbol by itself and with related safety statement
indicates important safety messages throughout this Manual. It is used to
draw attention to instructions involving your personal safety or the safety
of others. When you see this symbol, be alert, your safety is involved,
carefully read the message that follows, and inform other operators.
DANGER
This signal word indicates a hazardous situation which, if not avoided, will cause
death or serious injury.
WARNING
This signal word indicates a potentially hazardous situation which, if not avoided,
could cause serious injury or death.
CAUTION
This signal word is used when minor injury could result if the instructions are not
followed properly.
This signal word indicates information about the correct operation
and maintenance
of the equipment.
Failure to observe the instructions accompanying the symbol can lead to equipment
breakdown or other property damage.

6 (34)
2. Designed purpose of use
This AVANT Fence mower is an attachment that is suitable for use with AVANT compact loaders that are
shown in Table 1. The Fence mower is intended for trimming and cutting the hay and shrub under fences and
around fence posts. The attachment can also be used to remove unwanted weed from road banks, around
cornerstones, and near buildings. The design of the Fence mower allows the mower to maneuvre around
fence posts easily. When the cutting head comes in contact with a fence post the mower has a tilt mechanism
that allows the mower head to tilt back allowing continuous use. In addition, the cutting head floats upwards.
There are 4 side reach positions to choose from.
The cutting head consists of a hydraulically operated unit with two blades. The cutting head is covered with a
rubber bumper that will dampen impacts when working around fence posts. A tension spring mounted
between the mower frame and cutting head retracts the cutting head back into working position after the
cutting head hits a fence post, allowing a smooth operation around the post. The tension and fastening point
of the spring can be adjusted. A support wheel is available as standard.
The Fence mower is not designed for any other use than what is specified in this manual and must not be
used for any other purposes than what is intended for.
The attachment has been designed to require as little maintenance as possible. The operator can perform
regular maintenance tasks. All repair work can’t be performed by the operator, and demanding repair and
maintenance operations are to be left for professional technicians. All maintenance work must be done using
proper safety equipment. Spare parts must be identical with original specifications, which can be ensured by
using only original spare parts. A separate spare parts catalogue may be available, consult your Avant dealer.
Familiarise yourself with the manual's instructions regarding service and maintenance. Please contact your
AVANT dealer if you have additional questions about the operation or maintenance of the equipment, or if you
require spare parts or maintenance services.
Table 1 - Fence mower - Compatibility with Avant loaders
Avant
220 series 2
225
225LPG
313S
320S
420
423
520
523
R20
525LPG
R28
528
530
630
R35
635
640
735
745
750
755i
760i
850
860i
e5
e6
A440199 •- •••••(•)
It is recommended to use the attachment only with loaders marked with •in Table 1. When using with models
marked with (•), full performance may not be achieved. Additional counterweights may also be required. For
compatibility with a model not shown in table, contact your Avant dealer.

7 (34)
3. Safety instructions for using the Fence mower
Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly
powerful and improper or careless use or maintenance may cause serious personal injury or property
damage. Due to this, all operators must carefully familiarise themselves about correct use and the operator's
manuals of both the loader and the attachment before starting operation. Do not use the attachment if you
have not completely familiarised yourself with its operation and the related hazards.
DANGER
Misuse, careless use, or using an attachment that is in poor condition may
cause risk of serious injuries.
Familiarise yourself with the controls of the loader,
correct coupling procedure, and the corre
ct way to operate the attachment at a safe
area. Study especially how to stop the equipment in a safe manner. Read all safety
precautions carefully.
Read all safety instructions carefully before handling the attachment
WARNING
When attaching an attachment to the loader, ensure that the locking pins of the
loader's quick attach plate are in the lower position and that they have locked
the attachment to the loader. Never lift or move an unlocked attachment.
This attachment is designed to be used by one
operator at a time. Do not let others
near the danger area of the equipment when it is in use.

Always transport the attachment as low as possible to keep the centre of gravity low,
and keep the telescopic boom retracted during driving.
Impact hazard - Thrown objects. Do not let bystanders stand closer than the safety
distance of 2 metres from the machine.
The Fence mower can throw e.g. small
stones even distances up to 30 metres.
Stop the attachment if others get within
the safety distance.
Hazard of entanglement - Rotating parts. Never leave the driver’s seat when the
attachment is running or if the auxiliary hydraulics control is locked on. Always
keep a safe distance between persons and machinery that may start or move. Stop
the equipment followin
g the safe stopping procedure and lower the attachment firmly
on the ground before leaving the driver’s seat, or when other persons are present at
the working area.
Risk of crushing under the attachment or the loader boom - Lower the
attachment firmly on the ground before leaving the driver’s seat.
Make sure that
the attachment is properly supported during any maintenance or inspections. Do not
leave the driver’s seat when the loader boom is lifted. Going under a raised
attachment or loader boom is dange
rous, as the boom may lower due to loss of
stability, mechanical fault, or if another person operates the controls of the loader.
Keep hands and feet away from moving components. Wearing loose clothes, such as
loose shoelaces, or long scarves, should be
avoided when working with the
attachment.
Survey the operating area before starting the mower. Observe and mark, as
necessary, any obstructions at the area, such as rocks, posts, or stay wires.
Stop the attachment by following the safe stopping procedure before going near the
attachment or the loader boom.
Always transport the attachment as low and close to the machine as possible to keep
the centre of gravity low. On slippery surfaces drive slowly and deliberately. Operate
the controls of the loader slowly and calmly especially on inclined terrain.

8 (34)
WARNING
Use the attachment only for its intended use and only with original tools on the
attachment.
Shut down the loader and place the attachment to a safe position as shown in Safe
stopping procedure before any cleaning, maintenance, or adjustments.
Pay attention to the surroundings and any other persons and machines moving in the
vicinity. Pay attention to the contours of the terrain and other hazards, such as
branches and trees that can reach to
the driver's area, loose rocks, and slippery
surfaces.
Make sure to use only an attachment that is in good condition. Check the attachment
thoroughly in regular intervals. Do not modify the attachment in a manner that would
affect its safety. It is proh
ibited to drill holes on the attachment, and welding or other
means of fixing hooks or other objects on the attachment is strictly prohibited.
Use the attachment only for its intended purpose. Other use may create unnecessary
safety risks, and the equipment may get damaged.
Make sure that the loader is equipped with necessary safety components, and that
they are in working condition. Seat belt must be used. If there are specific hazards
related to the operating area, use appropriate safety equipment.
Also read the safety instructions and correct use of the loader from the operator's
manual of the loader.
DANGER
Wrong, improper, or careless use of the attachment causes serious risk of severe
injuries or death. Familiarise yourself with the cont
rols of the loader in a safe area. Pay
particular attention to the safe stopping of the attachment and the loader; follow the safe
stopping procedure shown in this manual before leaving the driver's seat.
WARNING
Hazard of thrown objects - Keep bystanders away.
Note
that the attachment can throw stones, gravel, or other objects
found in the area at high speed. Always keep a safety
distance of at least 2 metres to other persons.
The Fence
mower can throw e.g. small stones even distances up to
30 metres.
WARNING
Entanglement hazard - Keep away from moving parts.
Keep a safety distance of at least 2 metres from the
attachment when it is running and stop the attachment
immediately if anyone gets too close. Beware of the rotating
parts which crea
te entanglement hazard. Never reach into a
running attachment by any means. Shut down the loader
engine following the safe stopping procedure if reaching into
the work tools of the attachment.

9 (34)
3.1 Personal protective equipment
Remember to wear proper personal protective equipment:

The noise level at the driver's seat may exceed 85 dB(A) depending on loader
model and operating cycle. Extended exposure to loud noise can cause
hearing impairment. Wear hearing protection while working with the loader.
Wear protective gloves.
Wear safety boots whenever working with the loader.
Wear safety glasses e.g. when handling hydraulic components.
. ..
3.2 Safe shutdown procedure
Safe stopping of the attachment, before going near the attachment:
WARNING
Al
ways stop the attachment following safe stopping procedure before leaving
the driver's seat.
Safe stopping procedure prevents all unintentional movements of
the attachment. Note that the loader boom can move down even if the engine of the
loader is turned off. Safe stopping procedure:
Lower the boom and the attachment on the ground.
Shut down the loader engine and lock the parking brake.

Release residual pressure from the hydraulic system; move all hydraulic control
levers to their extreme positions a couple of times.
Prevent starting of the machine, remove ignition key.

10 (34)
4. Technical specifications
Table 2 - Fence mower - Specifications
Product number A440199
Cutting height: min 60 mm
Cutting width: 704 mm
Number of blades: 2 pcs
Maximum width in working position
(cutting head at the right side): 1870 mm
Minimum width in transport position: 1172 mm
Weight: 122 kg
Recommended hydraulic flow: 30-40 l/min, 20,0 MPa (200 bar)
Maximum input of hydraulic energy: 50 l/min, 22,5 MPa (225 bar)
Suitable Avant loaders: See Table 1
.

11 (34)
4.1 Safety labels and main components of the attachment
Listed below are the labels and markings on the attachment. They must be visible and readable on the
equipment. Replace any unclear or missing label. New labels are available via your retailer or contact
information provided on the cover.
WARNING
Make sure all warning decals are readable.
The warning labels contain important
safety information and they help to identify and remember the hazards related to the
equipment. Replace damaged or missing warning labels with new ones.
. ..
A46771 A46772 A46799 A46802 A46803
Attachment identification plate A440866
To apply a new label: Clean the surface thoroughly to remove all grease. Allow it to dry completely. Peel off
the protective film of the label and press firmly to apply. Take care not to touch the glue of the label.
.

12 (34)
Table 3 - Decal locations and warning messages
Decal Warning message
1 A46771 Misuse hazard -
Read instructions before
use.
2 A46772 Crushing hazard -
Do not go under a
raised attachment; stay away from raised
equipment.
3 A46799
Beware of thrown objects; keep a safe
distance from the equipment (2 m
minimum, up to 30 m).
4 A46802 Beware of sharp blades –
never reach to
the
rotating components and do not use
the equipment without all covers in
place.
5 A46803
Pinching and cutting hazard, keep clear
of moving parts, do not leave the
equipment running. Operate the
attachment only from the driver’s seat.
6 A440866 Attachment identification plate
. ..
Table 4 - Fence mower - Main components
1 Frame with Avant quick coupling brackets
2 Cutting head
3 Support disc
4 Blade (2 pcs)
5 Hydraulic motor
6 Rubber bumper
7 Turnable cutting arm
8 Frame bar locking pin: 5 positions
9 Adjustment for cutting head angle
10 Guard
11 Adjustable tension spring
12 Support wheel
13 Multiconnector holder (2 holders on frame)

13 (34)
5. Attaching the attachment
Attaching the attachment to the loader is quick and easy, but it must be done carefully. The attachment is
mounted to the loader boom by using the quick attach plate on the loader boom and the counterpart on the
attachment.
If the attachment is not locked to the loader, it may detach from the loader and cause a hazardous situation.
The loader must not be driven and the boom must never be lifted when the attachment has not been locked.
To prevent hazardous situations, always follow the coupling procedure shown below. Also remember the
safety instructions shown in this manual. The attachment is mounted to the loader as follows:
WARNING
Crushing risk - Make sure that an unlocked attachment will not move or fall over.
Do not stay in the area between the attachment and the loader. Mount the attachment
only on level surface.
Never move or lift an attachment that has not been locked.
Avant quick coupling system:
Step 1:

Lift the quick attach plate locking pins up and turn them backwards into the slot
so that they are locked in the upper position.
If your loader is eq
uipped with a hydraulic attachment locking system, see
additional instructions about the use of the locking system from the relevant
manuals.

Make sure that the hydraulic hoses are positioned so that they will not get in
between the coupling plate of the l
oader and the attachment, and that they will
not get squeezed or chafed against sharp edges.
Step 2:
Turn the quick attach plate hydraulically to an obliquely forward position.

Drive the loader onto the attachment. If your loader is equipped with a
telescopic boom, you can utilise this.

Align the upper pins of the loader’s quick coupling plate so that they are under
the corresponding brackets of the attachment.
Step 3:
Lift the boom slightly –
pull the boom control lever backward to raise the
attachment off the ground.

Turn the boom control lever left to turn the bottom section of the quick attach
plate onto the attachment.
Lock the locking pins manually or lock the hydraulic locking.
Always check the locking of both locking pins.

14 (34)
WARNING
Risk of crushing - Avoid tipping over the attachment.
Excessive tilting or lifting of an
unlocked attachment increases the risk of tipping the attachment over. Do not use the
automatic locking of the locking pins when the attachment is lifted more than one
meter
from the ground. If the locking pins do not return to the normal position when tilting, do
not tilt or raise the attachment any more. Lower the attachment on the ground and
secure the locking manually.
WARNING
Risk of falling objects - Preven
t dropping of
attachment.
An attachment that has not been completely locked to the
loader may fall on the boom or towards the operator, or
fall under the loader during driving, causing loss of
control of the loader. Never move or lift an attachment
that ha
s not been locked. Before moving or lifting the
attachment, make sure that the locking pins are in the
lower position and come through the fasteners on the
attachment on both sides.
WARNING
Make sure the loader is compatible with the attachment.
Stability of the loader,
possible overload of the attachment, and compatibility of loader control systems must be
ensured in addition to mechanical compatibility of the attachment. If you use the
attachment with a loader that is not fit to be used with th
e attachment model you have,
risks include tipping over, damage to attachment due to overload, and risks related to
uncontrolled motion of attachment and its parts. If your loader is not listed in Table 1 on
page 6, ask your Avant dealer before using this attachment.
5.1 Connecting and disconnecting hydraulic hoses
On Avant loaders the hydraulic hoses are connected using the multi connector system. If you have an Avant
300-700 series loader with the conventional quick couplers and wish to change to the multi connector system,
contact your Avant dealer or service point for instructions or installation services.
WARNING
Risk of movement of the attachment and ejection of hydraulic oil -
Never connect
or disconnect quick couplings or o
ther hydraulic components while the control
lever of the auxiliary hydraulics control lever is locked on or if the system is
pressurized.
Connecting or disconnecting the hydraulic couplings while the system is
pressurized may lead to unintended movements of the attachment, or ejection of high-
pressure fluid, which can cause serious injuries or burns. Follow safe stopping procedure
before disconnecting hydraulics.

15 (34)
Keep all fittings as clean as possible; use the protective caps on both the attachment and
the loader. Dirt, ice, etc. may make using the fittings significantly more difficult. Never
leave the hoses hanging on the ground; place the couplings onto the holder on the
attachment.
Connecting the multiconnector system:
1.
Align the pins of the attachment connector with corresponding
holes of the loader connector. The multiconnector will not connect
if the attachment connector is upside down.
2.
Connect and lock the multiconnector by turning the lever towards
the loader.
The lever should move easily all the way to its locking position. If the lever does not slide smoothly, check the
alignment and position of the connector and clean the connectors. Also shut down the loader and release the
residual hydraulic pressure.
To disconnect the multiconnector system:
Before disconnecting put the attachment down on a solid and even
surface.
1. Switch off the auxiliary hydraulics of the loader.
2.
While pushing unlock button, turn the lever to disconnect the
connector.
3. After ending operation put the multiconnect
or on its holder on the
attachment.
Disconnecting hydraulic hoses:
Before disconnecting the fittings, lower the attachment to safe position on solid and level surface. Turn the
control lever of the auxiliary hydraulics to its neutral position.
When
uncoupling the attachment, always disconnect the hydraulic couplings before
unlocking the quick coupling plate, to prevent hose damage and any oil spills. Reinstall
the protective caps on the fittings to prevent impurities from entering the hydraulic
system.
Releasing residual hydraulic pressure:
In case residual pressure is left in the hydraulic system of the attachment, it is often possible to disconnect the
hydraulic couplings, but it may be difficult to connect them the next time. If the fittings will not connect, the
residual pressure must be released by turning the auxiliary hydraulics control lever of the loader, when the
engine is turned off. To make sure that there will not be residual pressure in the hydraulic system of the
attachment, shut down the loader engine and move the auxiliary hydraulics control lever of the loader back
and forth before disconnecting the couplings.

16 (34)
6. Operating the attachment
Check the attachment and the operating environment once more before starting to work, and that all obstacles
have been removed from the operating area. Quick inspection of the equipment and the operating area before
use are parts of ensuring safety and the best performance of the equipment.
DANGER
Risk of cutting and severing - Sharp edges and sev
ering
points on work tools.
Beware of the sharp blades and risk
of crushing especially during maintenance or when removing
blockages. Always stop the attachment by following the safe
stopping procedure. To make sure that the attachment will
not rotate, dis
connect the multiconnector (or hydraulic quick
couplings) before going near it. Note that the loader boom
moves down and may be tilted even if the engine has been
stopped. Never go under a raised boom or any component of
the attachment. Keep away from the moving linkage.
. ..
WARNING
Entanglement hazard - Keep away from moving parts.
Keep a safety distance of at least 2 metres from the
attachment when it is running and stop the attachment
immediately if anyone gets too close. Beware of the rotati
ng
parts which create entanglement hazard. Never reach into a
running attachment by any means. Shut down the loader
engine following the safe stopping procedure if reaching into
the work tools of the attachment.
. ..
WARNING
Collision risk - Ensure good visibility.
Never lift this attachment to a height where
visibility from the driver's seat is obstructed. Ensure unobstructed visibility to all
directions. Keep all windows clean and free of dirt, ice and snow.
Drive slowly and pay attention to operating area at all times.

Make sure that there are no obstructions at the operating area, such as stay
wires, for example.

Do not let bystanders stay near the machine. Stop the attachment if others get
closer than 2 metres from the attachment.
Mark visib
ly any potential obstructions beforehand as far as practical so that
collisions can be avoided.

Operate equipment only at well lit areas or make sure the loader is equipped with
sufficient lights.
Always wear seat belt.
. ..

17 (34)
WARNING
Risk of cutting and entanglement from contact with moving parts -
Never leave the
equipment unattended while the engine is running.
The attachment may start
unexpectedly when removing a blockage, for example, if the hydraulic system is
pressurized. Always stop the attac
hment following the safe stopping procedure before
leaving the driver’s seat. Do not go near the attachment, if another person is operating
the controls of the loader. Shut down the loader engine and release the residual pressure
first.
6.1 Safety distance
WARNING
Hazard of thrown objects - Keep bystanders away. Note
that the attachment can throw stones, gravel, or other objects
found in the area at high speed. Always keep a safety
distance of at least 2 metres to other persons.
The Fence
mower can throw
e.g. small stones even distances up to
30 metres.
. ..
The minimum safety distance
of the attachment is 2 metres
from the machine. Do not let
bystanders get any closer
than 2 metres from the
attachment. Stop the
attachment if others get within
the safety distance.
The
Fence mower can throw e.g.
small stones even distances
up to 30 metres.

18 (34)
6.2 Checks before use
Check that the blades at the cutting head can rotate freely and that there is no string or other foreign
material around them.
Check that the cutting head can tilt back when it hits an obstacle. Check the spring, rubber bumper,
and other parts that will make mowing near fence posts possible.
Use only when all pins are locked and secured in place.
Ensure that bystanders are at a safe distance when operating the equipment. Do not let anyone to
enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to
reverse with the loader. Never assume that bystanders will remain where you last saw them;
especially children are often attracted to the moving equipment.
Check the general condition of the attachment and the loader, and check for possible hydraulic oil
leaks. Do the daily checks of the loader, see the operator's manual of the loader. The attachment must
not be used, if there is a fault in the hydraulic system of the loader or the attachment. Refer to Chapter
7 for maintenance instructions.
Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure
that the loader and the attachment are used in a safe manner and as intended. Do not allow children
to operate the equipment.
Remember correct working methods and avoid leaving the driver’s seat unnecessarily.Practise the
use of the attachment and the controls of the loader in a safe area. If you are unfamiliar with the
particular loader model, it is recommended to practice its use without any attachments.
6.3 Operator qualification
Anyone who intends to use the attachment must:
Know the intended use of the attachment.
Know how to use the loader safely in different operating conditions.
Read and always follow the instructions concerning the use of the attachment in this operator's
manual.
Have this manual and the operator's manual of the loader available.
Ensure that the loader and the attachment are used in a safe manner and as intended.
Never allow children to operate the equipment.
Never operate the loader or attachments while under the influence of alcohol, drugs, medication that
may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment.
Complete any possible mandatory training required by the employer before use.

19 (34)
6.4 Use
DANGER
Risk of crushing or entanglement from contact with moving parts -
Never leave the
equipment unattended while the engine is running. Follow safe stopping procedure.
CAUTION
Risk of thrown parts - Avoid running the attachment at very high speed. Operating
the attachment at too high speed may cause high vibrations, noise, or thrown parts from
the
attachment, or damage that could lead to personal injury. See recommended input
flow in this manual.
Before starting the Fence mower:
Set the mower to correct operating
position.

Lock the cutting arm on selected
side of the loader as shown in the
adjacent figure.

Check the adjustments, see the
following chapters.
Operating position:

Keep the support wheel in light
contact with the ground during
operation for easier control of the
attachment. However, in some
cases it might be easier to operate
the mower
with the support wheel
lifted to upper position.

If your loader is equipped with a
telescopic boom, you can utilize it
for a better view to the working
area.

The Fence mower can be
operated while driving forwards.
Using the Fence mower:
1. Cut the hay by letting the cutting head float on the ground when driving forwards.
2.
Start the mower by turning the auxiliary hydraulics control lever of the loader, or by depressing the
electric joystick buttons. As standard, the mower will rotate clockwise when the auxili
ary hydraulics
control lever is moved to its locking position (or red button of electric joystick is depressed, if equipped).
Operate the attachment with loader engine rpm that produces auxiliary hydraulics flow within the
recommended range for the attachment.
Always drive slowly while operating the mower. Adjust the drive speed according to the operating
conditions and the material being handled.

20 (34)
Avoid sharp turns while operating the Fence mower. Lift the attachment off the ground
before sharp turns.
Avoid hitting the ground hard with the mower, and avoid pressing the attachment too hard
against the ground. If the front wheels of the loader tend to lift off the ground, the
attachment is pressed too hard against the ground. To avoid damaging the mow
er,
operate the attachment by allowing the cutting head to float on the ground.
Operate the attachment keeping the hydraulic flow within recommended range. Never
exceed maximum allowed input of hydraulic energy.
6.5 Adjustments
The Fence mower can be adjusted in many ways, as shown in the following chapters. Best way to operate the
mower depends on the operating conditions, and the direction of travel.
6.5.1 Orientation
The cutting arm can can be locked on either side, for easier use in different operating areas. For transport,
lock the arm so that the overall width of the attachment is as narrow as possible.
The cutting head is assembled on the right as standard. For assembling the cutting head on the left see page
30.
Cutting head assembled on the left side Cutting head assembled on the right side
Direction of rotation:
Check the rotating direction of the blades. The blades should rotate clockwise when the cutting head is
assembled on the right, and counterclockwise when the cutting head is assembled on the left as indicated with
arrows in the figure above.
If the direction of rotation of the mower must be reversed, the hydraulic hoses must be connected in different
order. See page 30 for more information and safety instructions about hydraulic assemblies.