Avantco VI800 User manual

Snow plow
2021 1
Operator's Manual for Attachment
Snow plow
Product number
Snow plow V1800
A36795
Snow plow V2400
A36796
English
A438595 2021 1 EN SER 3 2019-
www.avanttecno.com

Snow plow 2021 1

Snow plow 2021 1
CONTENTS
1. FOREWORD ........................................................................................................................................ 4
Warning symbols used in this manual ...................................................................................................................................5
2. DESIGNED PURPOSE OF USE.......................................................................................................... 6
3. SAFETY INSTRUCTIONS FOR USING THE ATTACHMENT...................................................... 7
3.1 Personal protective equipment...............................................................................................................................9
3.2 Safe shutdown procedure ........................................................................................................................................9
4. TECHNICAL SPECIFICATIONS ....................................................................................................... 10
4.1 Safety labels and main components of the attachment ....................................................................................11
5. ATTACHING THE ATTACHMENT ................................................................................................. 13
5.1 Connecting and disconnecting hydraulic hoses..................................................................................................14
5.2 Electric connection ....................................................................................................................................................16
5.2.1 To connect the electric harness of the attachment to the loader........................................................16
6. INSTRUCTIONS FOR USE ................................................................................................................ 18
6.1 Checks before use .....................................................................................................................................................19
6.2 Operating the snow plow ........................................................................................................................................20
6.2.1 Preparing for use................................................................................................................................................20
6.2.2 Correct operating position .............................................................................................................................21
6.2.3 Tips for use..........................................................................................................................................................22
6.3 To turn plow blade sections....................................................................................................................................22
6.3.1 Using the hydraulic functions of the Snow plow with Opticontrol®...................................................24
6.4 Hinged lower blade sections ...................................................................................................................................24
6.5 Support legs.................................................................................................................................................................25
6.6 Cutting edges of the plow........................................................................................................................................26
6.7 Transport position.....................................................................................................................................................26
6.8 Storing the attachment .............................................................................................................................................27
7. MAINTENANCE AND SERVICE ....................................................................................................... 28
7.1 Inspection of hydraulic components .....................................................................................................................28
7.2 Inspection of metal structures................................................................................................................................29
7.3 Cleaning the attachment...........................................................................................................................................29
7.4 Lubrication ...................................................................................................................................................................29
7.5 Blade stoppers.............................................................................................................................................................30
8. WARRANTY TERMS .......................................................................................................................... 31

4 (34)
1. Foreword
Avant Tecno Oy would like to thank you for your purchase of this attachment for your Avant loader. It has
been designed and manufactured based on years of experience on product development and manufacturing.
By familiarizing yourself with this manual and following the instructions, you ascertain your safety and ensure
the reliable operation and long service life of the equipment. Read the instructions carefully before starting to
use the equipment or performing maintenance.
The purpose of this manual is to help you to:
operate the equipment in a safe and efficient manner
observe and prevent any hazardous situations
keep the equipment intact and ensure a long service life
With these instructions, even an inexperienced user can use the attachment and loader safely. The manual
includes important instructions for experienced AVANT operators as well. Ensure that all persons using the
loader have received proper guidance and familiarised themselves with the manual of the loader, each
attachment that are used, and all safety instructions before using the equipment. Using the equipment for
other purposes or use in any other way than described in this manual is prohibited. Keep this manual at hand
throughout the service life of the equipment. If you sell or transfer the equipment, be sure to hand over this
manual to the new owner. If the manual is lost or damaged, you can request a new one from your Avant
dealer or from the manufacturer.
In addition to the safety instructions included in this manual, you must observe all occupational safety
regulations, local laws, and other regulations concerning the use of the equipment. Particularly the regulations
concerning the use of the equipment on public road areas must be observed. Contact your Avant dealer for
more information about local requirements before you operate the loader on road areas.
Contact your local AVANT dealer for any questions, service, spare parts or about any problems that may
occur with the operation of your machine.
This manual contains the original instructions in English. Due to continuous product development some of the
details shown in this manual may differ from your equipment. Pictures may also depict optional equipment or
features that are not currently available. We reserve the right to change the contents of the manual without
notification. Copyright © 2021 Avant Tecno Oy. All rights reserved.

5 (34)
.
Warning symbols used in this manual
The following warning symbols are used throughout this manual. They indicate factors that must be taken into
account to reduce the risk of personal injury or damage to property:
WARNING SAFETY ALERT SYMBOL
This symbol means: “Warning, be alert! Your safety is involved!”
Carefully read the message that follows, it warns of an immediate hazard
that could cause serious personal injury.
The safety alert symbol by itself and with related safety statement
indicates important safety messages throughout this Manual. It is used to
draw attention to instructions involving your personal safety or the safety
of others. When you see this symbol, be alert, your safety is involved,
carefully read the message that follows, and inform other operators.
DANGER
This signal word indicates a hazardous situation which, if not avoided, will cause
death or serious injury.
WARNING
This signal word indicates a potentially hazardous situation which, if not avoided,
could cause serious injury or death.
CAUTION
This signal word is used when minor injury could result if the instructions are not
followed properly.
This signal word indicates information about the correct operation
and maintenance
of the equipment.
Failure to observe the instructions accompanying the symbol can lead to equipment
breakdown or other property damage.

6 (34)
2. Designed purpose of use
The AVANT Snow plow is an attachment that is suitable for use with AVANT multi purpose loaders that are
shown in Table 1. The Snow plow is a versatile articulated plow and it is intended to be used for clearing and
pushing snow on street areas. It has two hydraulically movable blades. The position of the blades can be
adjusted directly from the driver’s seat with the auxiliary hydraulics of the loader. This makes it possible to use
plow in various configurations, such as a turnable straight dozer blade, collecting v-blade, or as a point plow.
An electric selector valve is installed on the plow to make it possible to control the blades in two different
modes. The valve can be controlled electrically either with separate cable kit A353358 that is supplied with the
plow or with the optional Opticontrol® system.
The floating mounting bracket allows vertical movement of the plow as well as limited horizontal tilting for the
best possible ground surface following. The lower blade sections are hinged and held in place by springs. This
allows them to tilt backwards to prevent a sudden stop of the loader if the blade hits an obstacle, protecting
both the driver and the blades. Standard, adjustable skids help the plow to move smoothly also on rough
surfaces.
The blade edges are made of high quality, high tensile, abrasion resistant wear steel. They can be replaced
when needed. A rubber blade kit and an ice scraper kit are available as option.
Operating any control of the Snow plow or the loader is permitted only for persons who are familiar with
specific safety instructions and are capable to operate the equipment safely. Operating any control is allowed
only while seated on the driver’s seat. The Snow plow is not designed for any other use than what is specified
in this manual and must not be used for any other purposes than what is intended for.
The attachment has been designed to require as little maintenance as possible. The operator can perform
regular maintenance tasks. All repair work can’t be performed by the operator, and demanding repair and
maintenance operations are to be left for professional technicians. All maintenance work must be done using
proper safety equipment. Spare parts must be identical with original specifications, which can be ensured by
using only original spare parts. A separate spare parts catalogue may be available, consult your Avant dealer.
Familiarise yourself with the manual's instructions regarding service and maintenance. Please contact your
AVANT dealer if you have additional questions about the operation or maintenance of the equipment, or if you
require spare parts or maintenance services.
Table 1 - Snow plow - Compatibility with Avant loaders
Model
220
225
225LPG
313S
320S
419
420
520
R20
525LPG
R28
528
630
R35
635
640
735
745
750
755i
760i
850
860i
e5
e6
A36795 V1800 - - (•) •••••
A36796 V2400 - - - (•) ••••
It is recommended to use the attachment only with loaders marked with •in Table 1. When using with models
marked with (•), full performance may not be achieved. Additional counterweights may also be required. For
compatibility with a model not shown in table, contact your Avant dealer.
Compatibility recommendations are based on the width of the loader and available lifting capacity.

7 (34)
3. Safety instructions for using the attachment
Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly
powerful and improper or careless use or maintenance may cause serious personal injury or property
damage. Due to this, all operators must carefully familiarise themselves about correct use and the operator's
manuals of both the loader and the attachment before starting operation. Do not use the attachment if you
have not completely familiarised yourself with its operation and the related hazards.
DANGER
Misuse, careless use, or using an attachment that is in
poor condition may
cause risk of serious injuries.
Familiarise yourself with the controls of the loader,
correct coupling procedure, and the correct way to operate the attachment at a safe
area. Study especially how to stop the equipment in a safe manner.
Read all safety
precautions carefully.
Read all safety instructions carefully before handling the attachment
WARNING
When attaching an attachment to the loader, ensure that the locking pins of the
loader's quick attach plate are in the lower positio
n and that they have locked
the attachment to the loader. Never lift or move an unlocked attachment.

This attachment is designed to be used by one operator at a time. Do not let others
near the danger area of the equipment when it is in use.
Always transpo
rt the attachment as low as possible to keep the centre of gravity low,
and keep the telescopic boom retracted during driving.
Risk of impact from sudden stop - Never plow at high speed unless you can be
sure that there are no obstacles at the working area.
The loader may stop
suddenly if it hits an obstacle. Remember that there may be hidden obstructions or
fragile surfaces under the snow. Always use seat belt and drive with caution.
Risk of crushing under the attachment or the loader boom - Lower the
attachment firmly on the ground before leaving the driver’s seat.
Make sure that
the attachment is properly supported during any maintenance or inspections. Do not
leave the driver’s seat when the loader boom is lifted. Going under a raised
attachment o
r loader boom is dangerous, as the boom may lower due to loss of
stability, mechanical fault, or if another person operates the controls of the loader.
Pay attention to the surroundings and any other persons and machines moving in the
vicinity. Other pe
rsons must keep safety distance of 2 meters. Pay attention to the
contours of the terrain and other hazards, such as branches and trees that can reach
to the driver's area, loose rocks, and slippery surfaces.
Be sure not to tilt the attachment too far up to prevent it from tilting over the tipping
point of the hinged, floating coupling system.
Be sure not to tilt the plow towards the loader when lifted to prevent it from hitting the
loader boom. The plow can slide towards the loader boom because of it
s floating
quick coupling bracket.
Operate only at well lit areas. Make sure that all lights of the loader are in good
condition, clean, and adjusted correctly. Extra work lights are recommended for the
loader when operating during dark. Mark any obsta
cle at the work area before
plowing to avoid collisions.
Always transport the plow as low and as close to the machine as possible to keep the
centre of gravity low. Operate the controls of the loader slowly and in calm manner
especially during plowing.

8 (34)
WARNING
Shut down the loader and place the attachment to a safe position as shown in Safe
stopping procedure before any cleaning, maintenance, or adjustments.
Never use the attachment to lift or to transport persons or as any kind of work
platform even temporarily.
Pay attention to the surroundings and any other persons and machines moving in the
vicinity. Pay attention to the contours of the terrain and other hazards, such as
branches and trees that can reach to the driver's area, loose rocks, and slipper
y
surfaces.
Make sure to use only an attachment that is in good condition. Do not modify the
attachment in any way that could affect its safety.
Use the attachment only for its intended purpose. Other use may create unnecessary
safety risks, and the equipment may get damaged.
Make sure that the loader is equipped with necessary safety components, and that
they are in working condition. Seat belt must be used. If there are specific hazards
related to the operating area, use appropriate safety equipment.
Stop the loader engine and release any residual pressure before adjustments or
maintenance work.
Also read the safety instructions and correct use of the loader from the operator's
manual of the loader.
WARNING
Risk of crushing - Never all
ow anyone to get under a
lifted attachment or loader boom.
Keep in mind that the
loader boom can be lowered or tilted even if the engine has
been shut down (crushing hazard). The loader is not intended
to be left to keep a load elevated for longer periods.
Always
lower the attachment to a safe position before leaving the
driver's seat.
Observe the local regulations concerning the use of the equipment on public roads. The
loader may need to be registered for road use. Contact your local Avant dealer
or local
authorities for more information.
. ..

9 (34)
3.1 Personal protective equipment
Remember to wear proper personal protective equipment:

The noise level at the driver's seat may exceed 85 dB(A) depending on loader
model and operating cycle. Extended
exposure to loud noise can cause
hearing impairment. Wear hearing protection while working with the loader.
Wear protective gloves.
Wear safety boots whenever working with the loader.
Wear safety glasses e.g. when handling hydraulic components.
. ..
3.2 Safe shutdown procedure
Safe stopping of the attachment, before going near the attachment:
WARNING
Always stop the attachment following safe stopping procedure before leaving
the driver's seat. Safe stopping procedure prevents all unintentional
movements of
the attachment. Note that the loader boom can move down even if the engine of the
loader is turned off. Safe stopping procedure:
Lower the boom and the attachment on the ground.
Shut down the loader engine and lock the parking brake.
Release r
esidual pressure from the hydraulic system; move all hydraulic control
levers to their extreme positions a couple of times.
Prevent starting of the machine, remove ignition key.

10 (34)
4. Technical specifications
Table 2 - Snow plow - Specifications
Product number A36795 A36796
Model: V1800 V2400
Blade width: 1510-1840 mm 2020-2450 mm
Total width (with curved end flat edge / ice scraper
blade): 1570-1900 mm 2080-2510 mm
Weight: 330 kg 390 kg
Blade slewing angle: ± 35° hydraulic
Blade height: 770 mm
Recommended input of hydraulic energy: 15-20 l/min (200 Bar)
Maximum input of hydraulic energy: 35 l/min
20 MPa (200 Bar)
Compatible AVANT loader models: See Table 1
Available options
Rubber edges A37173 A37171
Ice scraper edges A36817 A36818
Left wing drive kit for snow plow A440385
The following equipment are recommended, but not mandatory equipment on the loader:
Opticontrol® system (optional equipment for loaders)
Opticontrol® retrofit kit A437338 for the attachment control switch pack (Not necessary when the loader is
equipped with Opticontrol® system)
6 function joystick for the optional left wing drive
These options are highly recommended for improved usability and ergonomics when the snow plow and its
blade turning functions are used frequently.
The snow plow is equipped with separate electric cable A353358 with a switch to enable operation without
any optional equipment on loader. See page 16 for more information concerning electric functions of the
attachment.
If the
left wing drive kit A440385 is installed to the plow, the loader must also be equipped
with the Opticontrol® system in order to control all functions.

11 (34)
4.1 Safety labels and main components of the attachment
Listed below are the labels and markings on the attachment. They must be visible and readable on the
equipment. Replace any unclear or missing label. New labels are available via your retailer or contact
information provided on the cover.
WARNING
Make sure all warning decals are readable. The warning
labels contain important
safety information and they help to identify and remember the hazards related to the
equipment. Replace damaged or missing warning labels with new ones.
. ..
Attachment identification plate
A420622 / A420623
A46771 A46772 A46803
. ..
To apply a new label: Clean the surface thoroughly to remove all grease. Allow it to dry completely. Peel off
the protective film of the label and press firmly to apply. Take care not to touch the glue of the label.
Table 3 - Decal locations and warning messages
Decal Warning message
1 A46771 Misuse hazard -
Read instructions before
use.
2 A46772 Crushing hazard -
Do not go under a
raised attachment; stay away from raised
equipment.
3
A46803
Pinching and cutting hazar
d, keep clear
of moving parts, do not leave the
equipment running. Operate the
attachment only from the driver’s seat.
4
A420622 /
A420623 Attachment identification plate

12 (34)
Table 4 - Snow plow - Main components
1 Frame with floating quick coupling system
2 Hydraulic slewing cylinders
3 Blades
4 Springs for hinged lower blade sections
5 Hinged lower blade section
6 Control valve
7 Adjustable skid shoes (standard equipment)
8 Multi connector holder

13 (34)
5. Attaching the attachment
Attaching the attachment to the loader is quick and easy, but it must be done carefully. The attachment is
mounted to the loader boom by using the quick attach plate on the loader boom and the counterpart on the
attachment.
If the attachment is not locked to the loader, it may detach from the loader and cause a hazardous situation.
The loader must not be driven and the boom must never be lifted when the attachment has not been locked.
To prevent hazardous situations, always follow the coupling procedure shown below. Also remember the
safety instructions shown in this manual. The attachment is mounted to the loader as follows:
WARNING
Crushing risk - Make sure that an unlocked attachment will not move or fall over.
Do not stay in the area between the attachment and t
he loader. Mount the attachment
only on level surface.
Never move or lift an attachment that has not been locked.
Avant quick coupling system:
Step 1:

Lift the quick attach plate locking pins up and turn them backwards into the slot
so that they are locked in the upper position.

If your loader is equipped with a hydraulic attachment locking system, see
additional instructions about the use of the locking system from the relevant
manuals.
Make sure that the hydraulic hoses and the electric cables are
positioned so
that they will not get in between the coupling plate of the loader and the
attachment, and that they will not get squeezed or chafed against sharp edges.
Step 2:
Turn the quick attach plate hydraulically to an obliquely forward position.

Drive the loader onto the attachment. If your loader is equipped with a
telescopic boom, you can utilise this.

Align the upper pins of the loader’s quick coupling plate so that they are under
the corresponding brackets of the attachment.
Step 3:
Lift the boom slightly –
pull the boom control lever backward to raise the
attachment off the ground.

Turn the boom control lever left to turn the bottom section of the quick attach
plate onto the attachment.
Lock the locking pins manually or lock the hydraulic locking.
Always check the locking of both locking pins.

14 (34)
WARNING
Risk of crushing - Avoid tipping over the attachment.
Excessive tilting or lifting of an
unlocked attachment increases the risk of tipping the attachment over. Do not use the
automa
tic locking of the locking pins when the attachment is lifted more than one meter
from the ground. If the locking pins do not return to the normal position when tilting, do
not tilt or raise the attachment any more. Lower the attachment on the ground and
secure the locking manually.
WARNING
Risk of falling objects -
Prevent dropping of
attachment.
An attachment that has not been completely locked to the
loader may fall on the boom or towards the operator, or
fall under the loader during driving, caus
ing loss of
control of the loader. Never move or lift an attachment
that has not been locked. Before moving or lifting the
attachment, make sure that the locking pins are in the
lower position and come through the fasteners on the
attachment on both sides.
WARNING
Make sure the loader is compatible with the attachment.
Stability of the loader,
possible overload of the attachment, and compatibility of loader control systems must be
ensured in addition to mechanical compatibility of the attachment.
If you use the
attachment with a loader that is not fit to be used with the attachment model you have,
risks include tipping over, damage to attachment due to overload, and risks related to
uncontrolled motion of attachment and its parts. If your loader i
s not listed in Table 1 on
page 6, ask your Avant dealer before using this attachment.
5.1 Connecting and disconnecting hydraulic hoses
On Avant loaders the hydraulic hoses are connected using the multi connector system. If you have an Avant
300-700 series loader with the conventional quick couplers and wish to change to the multi connector system,
contact your Avant dealer or service point for instructions or installation services.
WARNING
Risk of movement of the attachment and ejection of hydraulic oil -
Never connect
or disconnect quick couplings or other hydraulic components while the control
lever of the auxiliary hydraulics control lever is locked on or if the system is
pressurized. Connecting or disconnecting the hydraulic c
ouplings while the system is
pressurized may lead to unintended movements of the attachment, or ejection of high-
pressure fluid, which can cause serious injuries or burns. Follow safe stopping procedure
before disconnecting hydraulics.

15 (34)
Keep all fittings as clean as possible; use the protective caps on both the attachment and
the loader. Dirt, ice, etc. may make using the fittings significantly more difficult. Never
leave the hoses hanging on the ground; place the couplings onto the holder on the
attachment.
Connecting the multiconnector system:
1.
Align the pins of the attachment connector with corresponding
holes of the loader connector. The multiconnector will not connect
if the attachment connector is upside down.
2. Connect and lock the multiconn
ector by turning the lever towards
the loader.
The lever should move easily all the way to its locking position. If the lever does not slide smoothly, check the
alignment and position of the connector and clean the connectors. Also shut down the loader and release the
residual hydraulic pressure.
To disconnect the multiconnector system:
Before disconnecting put the attachment down on a solid and even
surface.
1. Switch off the auxiliary hydraulics of the loader.
2. While pushing unlock button, turn the lev
er to disconnect the
connector.
3.
After ending operation put the multiconnector on its holder on the
attachment.
Disconnecting hydraulic hoses:
Before disconnecting the fittings, lower the attachment to safe position on solid and level surface. Turn the
control lever of the auxiliary hydraulics to its neutral position.
When uncoupling the attachment, always disconnect the hydraulic couplings before
unlocking the quick coupling plate, to prevent hose damage and any oil spills. Reinstall
the protective
caps on the fittings to prevent impurities from entering the hydraulic
system.
Releasing residual hydraulic pressure:
In case residual pressure is left in the hydraulic system of the attachment, it is often possible to disconnect the
hydraulic couplings, but it may be difficult to connect them the next time. If the fittings will not connect, the
residual pressure must be released by turning the auxiliary hydraulics control lever of the loader, when the
engine is turned off. To make sure that there will not be residual pressure in the hydraulic system of the
attachment, shut down the loader engine and move the auxiliary hydraulics control lever of the loader back
and forth before disconnecting the couplings.

16 (34)
5.2 Electric connection
Electric functions of the attachment:
The desired mode of operation is selected with either of the electric coupling alternatives. The electric
selection valve of the Snow plow can be controlled with the standard electric harness that is supplied with the
attachment, or with the Opticontrol®system (optional equipment for loaders).
To control both blade sections separately the loader must be equipped with the Opticontrol®system and with
optional left wing separate drive A440385. Opticontrol®makes it possible to use all functions easily. When you
push the switches of the attachment control switch pack, Opticontrol®activates the auxiliary hydraulics of the
loader simultaneously. The functionality of the Opticontrol®system is available as a retrofit kit A437338. See
separate instructions about retrofitting of the wire harness from the instructions of the retrofit kit.
5.2.1 To connect the electric harness of the attachment to the loader
Starting form year 2016, there is an integrated electric plug in the multiconnector of the attachment. However,
a separate electric harness is also supplied with the attachment, to make it possible to connect and use the
attachment with loaders that are not equipped with an Opticontrol®system.
There are three ways to connect the electric connector, depending on the equipment on the loader and the
attachment:
1. If your loader is not equipped with the
Opticontrol® or the Attachment control switch
pack:
Use the separate cable kit with a switch that is
supplied with the attachment. Connect this cable to
the 12
V electric socket near the operator's seat of
the loader, and to the electric plug of the
attachment.
1.
Electric plug, connects to the 12 V electric
socket near the operator's seat of the loader.
More information about the power outlet of
the loader can be f
ound in the operator’s
manual of the loader.
2. ON-OFF switch
Select the location of the switch in the cab so
that it is easily accessible but will not be used
inadvertently.
3.
Connect to the electric plug of the
attachment.
If the attachment is equipped with a
n electric
plug that is integrated to the multiconnector
of the attachment, disconnect the electric
cable from the multiconnector.
Cable harness A34731

17 (34)
2. If your loader is
equipped with the Opticontrol®, or
the Attachment control switch pack, and
the
loader is manufactured after 2016:
If the electric socket is integrated in the
multiconnector, the electric harness of the
attachment is connected when the multiconnector
is coupled. Clean both multiconnectors before
connecting the multiconnector.
The
separate cable harness A34731 is not needed
in this case.
Opticontrol®, or Attachment control switch pack,
loader manufactured in 2016 or later
3. If your loader is

equipped with the Attachment control switch
pack, and the loader is manufactured before
2016:
If there is an electric socket near the
multiconnector of the loader, disconnect the
electric plug from the multiconnector and connect it
to the electric plug of the loader.
The separate cable harness A34731 is not needed
in this case.
Attachment control switch pack, loader
manufactured in 2015 or before
. ..
Make sure that electric cables will not get stuck, squeezed, or stretched when the
equipment moves.
With the help of the attachment control switch pack available for the l
oader, the
attachment control switches are easily accessible at the end of the boom control lever.
More information about the power outlet of the loader can be found in the operator’s
manual of the loader.

18 (34)
6. Instructions for use
Check the attachment and the operating environment once more before starting to work, and that all obstacles
have been removed from the operating area. Quick inspection of the equipment and the operating area before
use are parts of ensuring safety and the best performance of the equipment.
Practise the use of the attachment and its controls in an open and safe area. If you are unfamiliar with the
loader in use, it is recommended to practise its use without any attachments.
WARNING
Collision risk - Check the operating area before using the equipment.
If the plow hits
an obstacle the loader can stop suddenly and unexpectedly, causing injuries from impact
to head and body, regardless of the blade spring release system or other safety systems.
Drive slowly and pay attention to operating area at all times.
Make sure that there are no hidden obstacles under the snow, for example.

Do not let bystanders stay near the machine. Stop the attachment if others get
closer than 2 metres from the attachment.
Mark visibly any potential obstructi
ons beforehand as far as practical so that
collisions can be avoided.

Operate equipment only at well lit areas or make sure the loader is equipped with
sufficient lights.
The spring loaded blade sections improve safety only when driving forward -
when reversing, drive extremely slow.
Always wear seat belt.
WARNING
Risk of collisions - Ensure good visibility.
Never lift this attachment to a height where
visibility from the driver's position is obstructed. Ensure unobstructed visibility to all
directions. Keep all windows clean and free of dirt, ice, snow etc.
CAUTION
Risk of sudden stop when reversing -
The blade edges tilt back only if driving
forward.
When driving in reverse the blade sections are rigid. This can cause a sudden
stop and subseq
uent injuries in collision with an obstacle while reversing with the plow on
the ground. The plow is intended to be used and the safety features operate only in
forward travel direction.

19 (34)
.
6.1 Checks before use
Check that all obstacles, including any possibly hidden ones, have been removed from the working
area or marked visibly before operation.
Make sure that the lower blade sections and their spring release system is in full working condition
and unblocked before starting plowing work. All springs must be fastened securely and the lower
sections of the blades must be able to tilt.
Ensure that bystanders are at a safe distance when operating the equipment. Do not let anyone to
enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to
reverse with the loader. Never assume that bystanders will remain where you last saw them;
especially children are often attracted to the moving equipment.
Check the general condition of the attachment and the loader, and check for possible hydraulic oil
leaks. Do the daily checks of the loader, see the operator's manual of the loader. The attachment must
not be used, if there is a fault in the hydraulic system of the loader or the attachment. Refer to Chapter
7 for maintenance instructions.
Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure
that the loader and the attachment are used in a safe manner and as intended. Do not allow children
to operate the equipment.
Never operate the loader or attachments while under the influence of alcohol, drugs, medication that
may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment.
Remember correct working methods and avoid leaving the driver’s seat unnecessarily.
. ..
WARNING
Risk of injuries related to sudden stop -
Drive slow and always stay alert for
possible obstacles.
For the safety of the operator, the blade is equipped with safety
mechanisms to reduce the risk of sudden stopping of
the machine and the possibility of
injuries that could follow. However, the existence of the safety features will not replace
operator's responsibility. Careful and cautious operating are essential for safety. Any
safety feature by itself will not guarante
e safe operating of the plow. The performance of
the safety features may be hindered in certain conditions, such as packed snow or ice, or
when reversing with the loader.

20 (34)
.
6.2 Operating the snow plow
The plow is equipped with a floating coupling bracket which
can be set quickly and easily to correct operating position
allows vertical movement of the attachment to keep the plowing edge and skids on the ground on
uneven surfaces
allows also limited sideways tilting of the plow
is reliable and easy to maintain
The correct operating position is essential for efficient plowing and controllability of the
loader. Keep the plow lightly against the ground in upright position. If the plow is pressed
down too hard the steerability of the loader may be reduced,
as the front tyres tend to lift
off from the ground.
6.2.1 Preparing for use
Familiarise yourself with the controls and correct position of the plow, to be able to use the plow in the most
efficient way. When using the plow for the first time, set the blade sections to straight position for easy
understanding of the effects of changes in position of the plow.
Upright position:
As a general rule, the plow should be adjusted to an upright position. When the plow is set to correct operating
position:
the entire edge of the plow is in contact with the ground
the plow does not steer the loader to aside
the front wheels of the loader are firmly on the ground
the plow moves snow effectively
The actual best position of the plow depends on the operating area and position of the individual blade
sections and can be learned through experience.
Telescopic boom:
Set the telescopic boom of the loader to the position in which you intend to operate the plow. Normally the
telescopic boom should be kept retracted for the best visibility and stability.
Boom floating system of the loader:
If the loader is equipped with the optional bloom floating system, it should be switched on after the plow is set
to operating position. The floating bracket of the attachment makes it possible to use the plow efficiently even
if the loader is not equipped with boom floating system.