Avaya S8700-Series User manual

Quick Start
for Hardware Installation
Avaya S8700-Series
Media Servers
555-245-703
Issue 7
February 2007
700419963

Copyright 2007, Avaya Inc.
All Rights Reserved
Notice
Every effort was made to ensure that the
information in this document was complete and
accurate at the time of printing. However,
information is subject to change.
Warranty
Avaya Inc. provides a limited warranty on this
product. Refer to your sales agreement to establish
the terms of the limited warranty. In addition,
Avaya’s standard warranty language as well as
information regarding support for this product, while
under warranty, is available through the following
Web site: http://www.avaya.com/support.
Preventing Toll Fraud
"Toll fraud" is the unauthorized use of your
telecommunications system by an unauthorized
party (for example, a person who is not a corporate
employee, agent, subcontractor, or is not working
on your company's behalf). Be aware that there
may be a risk of toll fraud associated with your
system and that, if toll fraud occurs, it can result in
substantial additional charges for your
telecommunications services.
Avaya Fraud Intervention
If you suspect that you are being victimized by toll
fraud and you need technical assistance or
support, in the United States and Canada, call the
Technical Service Center's Toll Fraud Intervention
Hotline at
1-800-643-2353.
Disclaimer
Avaya is not responsible for any modifications,
additions or deletions to the original published
version of this documentation unless such
modifications, additions or deletions were
performed by Avaya. Customer and/or End User
agree to indemnify and hold harmless Avaya,
Avaya's agents, servants and employees against
all claims, lawsuits, demands and judgments
arising out of, or in connection with, subsequent
modifications, additions or deletions to this
documentation to the extent made by the Customer
or End User.
How to Get Help
For additional support telephone numbers, go to
the Avaya support Web site: http://www.avaya.com/
support. If you are:
• Within the United States, click the
Escalation Contacts link that is located
under the Support Tools heading. Then
click the appropriate link for the type of
support that you need.
• Outside the United States, click the
Escalation Contacts link that is located
under the Support Tools heading. Then
click the International Services link that
includes telephone numbers for the
international Centers of Excellence.
Providing Telecommunications Security
Telecommunications security (ofvoice, data, and/or
video communications) is the prevention of any
type of intrusion to (that is, either unauthorized or
malicious access to or use of) your company's
telecommunications equipment by some party.
Your company's "telecommunications equipment"
includes both this Avaya product and any other
voice/data/video equipment thatcould be accessed
via this Avaya product (that is, "networked
equipment").
An "outside party" is anyone who is not a corporate
employee, agent, subcontractor, or is not working
on your company's behalf. Whereas, a "malicious
party" is anyone (including someone who may be
otherwise authorized) who accesses your
telecommunications equipment with either
malicious or mischievous intent.
Such intrusions may be either to/through
synchronous (time-multiplexed and/or
circuit-based), or asynchronous (character-,
message-, or packet-based) equipment, or
interfaces for reasons of:
• Utilization (of capabilities special to the
accessed equipment)
• Theft (such as, of intellectual property,
financial assets, or toll facility access)
• Eavesdropping (privacy invasions to
humans)
• Mischief (troubling, but apparently
innocuous, tampering)
• Harm (such as harmful tampering, data
loss or alteration, regardless of motive
or intent)
Be aware that there may be a risk of unauthorized
intrusions associated with your system and/or its
networked equipment. Also realize that, if such an
intrusion should occur, it could result in a variety of
losses to your company (including but not limited
to, human/data privacy, intellectual property,
material assets, financial resources, labor costs,
and/or legal costs).
Responsibility for Your Company’s
Telecommunications Security
The final responsibility for securing both this
system and its networked equipment rests with you
- Avaya’s customer system administrator, your
telecommunications peers, and your managers.
Base the fulfillment of your responsibility on
acquired knowledge and resources from a variety
of sources including but not limited to:
• Installation documents
• System administration documents
• Security documents
• Hardware-/software-based security
tools
• Shared information between you and
your peers
• Telecommunications security experts

To prevent intrusions to your telecommunications
equipment, you and your peers should carefully
program and configure:
• Your Avaya-provided
telecommunications systems and their
interfaces
• Your Avaya-provided software
applications, as well as their underlying
hardware/software platforms and
interfaces
• Any other equipment networked to your
Avaya products
TCP/IP Facilities
Customers may experience differences in product
performance, reliability and security depending
upon network configurations/design and
topologies, even when the product performs as
warranted.
Standards Compliance
Avaya Inc. is not responsible for any radio or
television interference caused by unauthorized
modifications of this equipment or the substitution
or attachment of connecting cables and equipment
other than those specified by Avaya Inc. The
correction of interference caused by such
unauthorized modifications, substitution or
attachment will be the responsibility of the user.
Pursuant to Part 15 of the Federal Communications
Commission (FCC) Rules, the user is cautioned
that changes or modifications not expressly
approved by Avaya Inc. could void the user’s
authority to operate this equipment.
Product Safety Standards
This product complies with and conforms to the
following international Product Safety standards as
applicable:
Safety of Information Technology Equipment, IEC
60950, 3rd Edition, or IEC 60950-1, 1st Edition,
including all relevant national deviations as listed in
Compliance with IEC for Electrical Equipment
(IECEE) CB-96A.
Safety of Information Technology Equipment, CAN/
CSA-C22.2
No. 60950-00 / UL 60950, 3rd Edition, or CAN/
CSA-C22.2 No. 60950-1-03 / UL 60950-1.
Safety Requirements for Information Technology
Equipment, AS/NZS 60950:2000.
One or more of the following Mexican national
standards, as applicable: NOM 001 SCFI 1993,
NOM SCFI 016 1993, NOM 019 SCFI 1998.
The equipment described in this document may
contain Class 1 LASER Device(s). These devices
comply with the following standards:
• EN 60825-1, Edition 1.1, 1998-01
• 21 CFR 1040.10 and CFR 1040.11.
The LASER devices used in Avaya equipment
typically operate within the following parameters:
Luokan 1 Laserlaite
Klass 1 Laser Apparat
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposures. Contact
your Avaya representative for more laser product
information.
Electromagnetic Compatibility (EMC) Standards
This product complies with and conforms to the
following international EMC standards and all
relevant national deviations:
Limits and Methods of Measurement of Radio
Interference of Information Technology Equipment,
CISPR 22:1997, EN55022:1998, and AS/NZS
3548.
Information Technology Equipment - Immunity
Characteristics - Limits and Methods of
Measurement, CISPR 24:1997 and
EN55024:1998, including:
• Electrostatic Discharge (ESD) IEC
61000-4-2
• Radiated Immunity IEC 61000-4-3
• Electrical Fast Transient IEC 61000-4-4
• Lightning Effects IEC 61000-4-5
• Conducted Immunity IEC 61000-4-6
• Mains Frequency Magnetic Field IEC
61000-4-8
• Voltage Dips and Variations IEC
61000-4-11
Power Line Emissions, IEC 61000-3-2:
Electromagnetic compatibility (EMC) - Part 3-2:
Limits - Limits for harmonic current emissions.
Power Line Emissions, IEC 61000-3-3:
Electromagnetic compatibility (EMC) - Part 3-3:
Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage supply
systems.
Typical Center
Wavelength Maximum Output Power
830 nm - 860 nm -1.5 dBm
1270 nm - 1360 nm -3.0 dBm
1540 nm - 1570 nm 5.0 dBm

Federal Communications Commission
Statement
Part 15:
Part 68: Answer-Supervision Signaling
Allowing this equipment to be operated in a manner
that does not provide proper answer-supervision
signaling is in violation of Part 68 rules. This
equipment returns answer-supervision signals to
the public switched network when:
• answered by the called station,
• answered by the attendant, or
• routed to a recorded announcement
that can be administered by the
customer premises equipment (CPE)
user.
This equipment returns answer-supervision signals
on all direct inward dialed (DID) calls forwarded
back to the public switched telephone network.
Permissible exceptions are:
• A call is unanswered.
• A busy tone is received.
• A reorder tone is received.
Avaya attests that this registered equipment is
capable of providing users access to interstate
providers of operator services through the use of
access codes. Modification of this equipment by
call aggregators to block access dialing codes is a
violation of the Telephone Operator Consumers Act
of 1990.
REN Number
For MCC1, SCC1, CMC1, G600, and G650 Media
Gateways:
This equipment complies with Part 68 of the FCC
rules. On either the rear or inside the front cover of
this equipment is alabel thatcontains,among other
information, the FCC registration number, and
ringer equivalence number (REN) for this
equipment. If requested, this information must be
provided to the telephone company.
For G350 and G700 Media Gateways:
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
On the rear of this equipment is a label that
contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX. The
digits represented by ## are the ringer equivalence
number (REN) without a decimal point (for
example, 03 is a REN of 0.3). If requested, this
number must be provided to the telephone
company.
For all media gateways:
The REN is used to determine the quantity of
devices that may be connected to the telephone
line. Excessive RENs on the telephone line may
result in devices not ringing in response to an
incoming call. In most, but not all areas, the sum of
RENs should not exceed 5.0. To be certain of the
number of devices that may be connected to a line,
as determined by the total RENs, contact the local
telephone company.
REN is not required for some types of analog or
digital facilities.
Means of Connection
Connection of this equipment to the telephone
network is shown in the following tables.
For MCC1, SCC1, CMC1, G600, and G650 Media
Gateways:
Note: This equipment has been tested and
found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
Manufacturer’s
Port Identifier FIC Code SOC/REN/ A.S. Code Network Jacks
Off premises
station OL13C 9.0F RJ2GX, RJ21X,
RJ11C
DID trunk 02RV2-T 0.0B RJ2GX,
RJ21X
CO trunk 02GS2 0.3A RJ21X
02LS2 0.3A RJ21X
Tie trunk TL31M 9.0F RJ2GX
Basic Rate
Interface 02IS5 6.0F, 6.0Y RJ49C
1.544 digital
interface 04DU9-BN 6.0F RJ48C, RJ48M
04DU9-IK
N6.0F RJ48C, RJ48M
04DU9-IS
N6.0F RJ48C, RJ48M
120A4 channel
service unit 04DU9-D N6.0Y RJ48C

For G350 and G700 Media Gateways:
For all media gateways:
If the terminal equipment (for example, the media
server or media gateway) causes harm to the
telephone network, the telephone company will
notify you in advance that temporary
discontinuance of service may be required. But if
advance notice is not practical, the telephone
company will notify the customer as soon as
possible. Also, you will be advised of your right to
file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens, the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for
repair or warranty information, please contact the
Technical Service Center at
1-800-242- 2121 or contact your local Avaya
representative. If the equipment is causing harm to
the telephone network, the telephone company
may request that you disconnect the equipment
until the problem is resolved.
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with
this product. It is designed to be connected to a
compatible modular jack that is also compliant. It is
recommended that repairs be performed by Avaya
certified technicians.
The equipment cannot be used on public coin
phone service provided by the telephone company.
Connection to party line service is subject to state
tariffs. Contact the state public utility commission,
public service commission or corporation
commission for information.
This equipment, if it uses a telephone receiver, is
hearing aid compatible.
Canadian Department of Communications
(DOC) Interference Information
This Class A digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe A est
conforme à la norme
NMB-003 du Canada.
This equipment meets the applicable Industry
Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration
number. The abbreviation, IC, before the
registration number signifies that registration was
performed based on a Declaration of Conformity
indicating that Industry Canada technical
specifications were met. It does not imply that
Industry Canada approved the equipment.
Installation and Repairs
Before installing this equipment, users should
ensure that it is permissible to be connected to the
facilities of the local telecommunications company.
The equipment must also be installed using an
acceptable method of connection. The customer
should be aware that compliance with the above
conditions may not prevent degradation of service
in some situations.
Repairs to certified equipment should be
coordinated by a representative designated by the
supplier. Any repairs or alterations made by the
user to this equipment, or equipment malfunctions,
may give the telecommunications company cause
to request the user to disconnect the equipment.
Declarations of Conformity
United States FCC Part 68 Supplier’s Declaration
of Conformity (SDoC)
Avaya Inc. in the United States of America hereby
certifies that the equipment described in this
document and bearing a TIA TSB-168 label
identification number complies with the FCC’s
Rules and Regulations 47 CFR Part 68, and the
Administrative Council on Terminal Attachments
(ACTA) adopted technical criteria.
Avaya further asserts that Avaya handset-equipped
terminal equipment described in this document
complies with Paragraph 68.316 of the FCC Rules
and Regulations defining Hearing Aid Compatibility
and is deemed compatible with hearing aids.
Copies of SDoCs signed by the Responsible Party
in the U. S. can be obtained by contacting your
local sales representative and are available on the
following Web site: http://www.avaya.com/support.
Manufacturer’s
Port Identifier FIC Code SOC/REN/ A.S. Code Network Jacks
Ground Start
CO trunk 02GS2 1.0A RJ11C
DID trunk 02RV2-T AS.0 RJ11C
Loop Start CO
trunk 02LS2 0.5A RJ11C
1.544 digital
interface 04DU9-BN 6.0Y RJ48C
04DU9-D
N6.0Y RJ48C
04DU9-IK
N6.0Y RJ48C
04DU9-IS
N6.0Y RJ48C
Basic Rate
Interface 02IS5 6.0F RJ49C

All Avaya media servers and media gateways are
compliant with FCC Part 68, but many have been
registered with the FCC before the SDoC process
was available. A list of all Avaya registered
products may be found at: http://www.part68.org by
conducting a search using "Avaya" as
manufacturer.
European Union Declarations of Conformity
Avaya Inc. declares that the equipment specified in
this document bearing the "CE" (Conformité
Europeénne) mark conforms to the European
Union Radio and Telecommunications Terminal
Equipment Directive (1999/5/EC), including the
Electromagnetic Compatibility Directive (89/336/
EEC) and Low Voltage Directive (73/23/EEC).
Copies of these Declarations of Conformity (DoCs)
can be obtained by contacting your local sales
representative and are available on the following
Web site: http://www.avaya.com/support.
Japan
This is a Class A product based on the standard of
the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). If this
equipment is used in a domestic environment, radio
disturbance may occur, in which case, the user
may be required to take corrective actions.
To order copies of this and other documents:
Call: Avaya Publications Center
Voice 1.800.457.1235 or 1.207.866.6701
FAX [phone] or 1.207.626.7269
Write: Globalware Solutions
200 Ward Hill Avenue
Haverhill, MA 01835 USA
Attention: Avaya Account Management
E-mail: [email protected]
For the most current versions of documentation, go
to the Avaya support Web site: http://
www.avaya.com/support.

Issue 7 February 2007 7
Process and Specifications
1 Verifying the Equipment
2 Installing the Hardware
3 Connecting the Cables
4 Configuring the UPS and the Ethernet Switch
5 Connecting the Laptop
6 Connecting to the G650 Media Gateway
7 Troubleshooting
Hardware Specifications
Weight Dimensions
Equipment English (lb) Metric (kg) English (in) Metric (cm) Us
S8720 Server 60 27 3.4 x 17.5 x 26 8.6 x 45 x 66 2
UPS >34 >15 3.5 x 17 x 19 9 x 43 x 48 2
Ethernet switch
C363T
C364T
10.8
11
4.9
5.0
1.75 x 17 x 14.4
1.75 x 17 x 14.4
4.5 x 43.2 x 36.6
4.5 x 43.2 x 36.6
1
1

8 Quick Start for Hardware Installation: Avaya S8700-Series Media Servers
Legend
2
DH/C
Documentation
87qslgnd KLC 021605
Avaya technician
or business partner Customer Product
documentation
Green
straight-through
CAT5 cable
Red
straight-through
CAT5 cable
Crossover
CAT5 cable Services
laptop
Customer
network
Sequence step Duplex
reliability High/Critical
reliability
Nonswitched
electrical outlet System
administration
Anti-static wrist
ground strap
required
Warning!
Use 2 people
to lift equipment
Filled-outElectronic
Pre-Installation
Worksheet (EPW)

Issue 7 February 2007 9
1Verifying the Equipment
Documentation
Off
On
1 2
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
UID
2
1
S1 S2
ROUT SYS PWR
LNK COL Tx Rx FDX Hspd LAG PoE
1357911 13 15 17 19 21 23
24681012 141618202224
10/100bT
ETHERNET
10/100bT
ETHERNET
Compact flash
reader and
flashcard
Product
documentation Modem (2) Services
laptop
CAT5 CAT5 CAT5 CAT5
(1) (4 -68) (4 - 68) (1) (1) (2)
Fiber
cable IPSI control network cables Duplication cable Laptop to
server cable
Modem cable
Cross-point screwdriver
IPSI adapter
(1 - 128)
SNMP module
and cable (2)
Screws
S8720 Media Server (2) Ethernet switch * (1 or more) UPS* (2)

10 Quick Start for Hardware Installation: Avaya S8700-Series Media Servers
2a Installing the Hardware: SNMP Module
NOTE: Your SNMP module may not look exactly like this.
8720qseq2 LAO 102605
S1 S2
ROUT SYS PWR
LNK COL Tx Rx FDX Hspd LAG PoE
1357911 13 15 17 19 21 23
24681012 141618202224
Customer network
Screws
Ethernet switch*
(1 or more)
UPS* System administration
and filled-out Electronic
Pre-Installation Worksheet
19 in. (48.3 cm)
data rack (1)
*Optional
(2)
COMM PORT
IOIOI
ISOLATED
ALARM PORT
COMMPORT
IOIOI
ISOLA
TED
ALARMPORT
2
3
COMMPORT
IOIOI
ISOLA
TED
ALARMPORT
1
Off
On
1 2
Off
On
1 2
4
Off
On
1 2
87qs2a KLC 010605

Issue 7 February 2007 11
2b Installing the DAL2 Card: Removing the Cover
2c Installing the DAL2 Card: Removing the PCI Riser Cage
8720qsxa LAO 101206
UID
2
1
01
1
0
disc
COMPACT
5
45
4
SimplexDuplexchch2
1
3
23
2
2
1
2
3
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
8720qsxb LAO 101206
2
1
1

12 Quick Start for Hardware Installation: Avaya S8700-Series Media Servers
2d Installing the DAL2 Card: Installing the DAL2 Card
8720qsxc LAO 101206
DAL1
DUP
MEMORY
RECEIVE
MODE
LINC
SYNC
TRANS
MODE
LINC
ACTIVE
2
1
3
4
5

Issue 7 February 2007 13
2e Installing the DAL2 Card: Replacing the PCI Riser Cage
2f Installing the DAL2 Card: Replacing the Cover
2
3
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
8720qsxd LAO 101206
DAL1
DUP
MEMORY
RECEIVE
MODE
LINC
SYNC
TRANS
MODE
LINC
ACTIVE
2
2
1
8720qsxe LAO 101306
UID
2
1
01
1
0
disc
COMPACT
5
45
4
SimplexDuplexchch2
1
3
23
2
2
1

14 Quick Start for Hardware Installation: Avaya S8700-Series Media Servers
2g Installing the Hardware: Attaching Rails to the S8720
2
1
UID
2
1
01
1
0
disc
COMPACT
5
45
4
SimplexDuplexch ch 2
1
3
23
2
8720qs2d LAO 092805

Issue 7 February 2007 15
2h Installing the Hardware: Attaching Rails to the Rack
8720qs2f LAO 09270
5

16 Quick Start for Hardware Installation: Avaya S8700-Series Media Servers
2i Installing the Hardware: Inserting the Server Rails into the
Rack Rails
1
1
8720qs2h LAO 092805
UID
2
1
01
1
0
disc
COMPACT
5
45
4
SimplexDuplexch ch2
1
3
23
2

Issue 7 February 2007 17
2j Installing the Hardware: Rack Installation
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
UID
2
1
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
UID
2
1
2
1
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
UID
2
1
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
UID
2
1
S1 S2
ROUT SYS PWR
LNK COL Tx Rx FDX Hspd LAG PoE
1357911 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
1
*
S1 S2
ROUT SYS PWR
LNK COL Tx Rx FDX Hspd LAG PoE
1357911 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
2
*
S1 S2
ROUT SYS PWR
LNK COL Tx Rx FDX Hspd LAG PoE
1357911 13 15 17 19 21 23
24681012 141618202224
1
1
2
2 2
33
4
4 5
6 7
5 6
7 8
1 1
9
1
2
DH/C
*
**
**
8
8720qsc2f LAO 100505
2
1
5ft
(1.5m)
5 ft
(1.5 m)
(If dedicated
control network)

18 Quick Start for Hardware Installation: Avaya S8700-Series Media Servers
3a Connecting the Cables: Duplex Reliability (software
memory duplication)
S1 S2
ROUT SYS PWR
LNK COL Tx Rx FDX Hspd LAG PoE
1357 911 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
2
3
iLO
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
2
3
iLO
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
Off
On
1 2
Off
On
1 2
1
1
2
1
2
1
1
2
1
2
D
8720qs3c LAO 100505
X360STK
U
CABLE TOUPPER UNIT
CABLE TOLOWER UNIT
L
CPR
BUPS INPUT
50-57V 8A max
_
+
UID
2
1
UID
2
1
Rear
Front
(If dedicated
control network)
(If non-dedicated
control network)

Issue 7 February 2007 19
3b Connecting the Cables: Duplex Reliability (hardware memory
duplication)
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
UID
2
1
UID
2
1
S1 S2
ROUT SYS PWR
LNK COL Tx Rx FDX Hspd LAG PoE
1357 911 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
2
3
iLO
VDCI
DAL1 DUP MEMORY
RECEIVE MODE
LINC SYNC
TRANS MODE
LINC ACTIVE
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
2
3
iLO
VDCI
DAL1 DUP MEMORY
RECEIVE MODE
LINC SYNC
TRANS MODE
LINC ACTIVE
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
Off
On
1 2
Off
On
1 2
1
1
2
1
2
1
1
2
1
2
D
8720qs3b LAO 101206
X360STK
U
CABLE TOUPPER UNIT
CABLE TOLOWER UNIT
L
CPR
BUPS INPUT
50-57V 8A max
_
+
(If non-dedicated
control network)
Rear
Front
(If dedicated
control network)

20 Quick Start for Hardware Installation: Avaya S8700-Series Media Servers
3c Connecting the Cables: High or Critical Reliability (hardware
memory duplication)
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
SimplexDuplexchch2
0
1
1
1
0
3
23
2
5
45
4
disc
COMPACT
UID
2
1
UID
2
1
S1 S2
ROUT SYS PWR
LNK COL Tx Rx FDX Hspd LAG PoE
1357 911 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24 X360STK
U
CABLE TOUPPER UNIT
CABLE TOLOWER UNIT
L
CPR
BUPS INPUT
50-57V 8A max
_
+
S1 S2
ROUT SYS PWR
LNK COL Tx Rx FDX Hspd LAG PoE
1357 911 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24 X360STK
U
CABLE TOUPPER UNIT
CABLE TOLOWER UNIT
L
CPR
BUPS INPUT
50-57V 8A max
_
+
2
3
iLO
VDCI
DAL1 DUP MEMORY
RECEIVE MODE
LINC SYNC
TRANS MODE
LINC ACTIVE
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
2
3
iLO
VDCI
DAL1 DUP MEMORY
RECEIVE MODE
LINC SYNC
TRANS MODE
LINC ACTIVE
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
Off
On
1 2
Off
On
1 2
1
1
2
2
1
2
1
1
2
2
1
2
H/C
8720qs3d LAO 101206 Front Rear
(If non-dedicated
control network)