AVM FRITZ!X PC User manual

High-Performance ISDN by . . .
ISDN for the PC, Telephone and fax
ISDN f0r The PC, telephone and fax
manual
Manual
English Edition

2
Legal Notice
FRITZ!X PC
This manual and the software it describes are protected by copyright. The
manual and software as presented are the object of a license agreement and
maybeusedonlyinaccordancewiththelicenseconditions. Thelicenseebears
all risk in regard to hazards and impairments of quality which may arise in
connectionwiththeuseofthisproduct.
This manual and the software programs it describes may not be transmitted,
reproducedoralteredinwholeorinpart,inanyform,byanymeans,normaythey
be translated into any other natural or computer language. The creation of a
backup copy for personal use is excepted. The information herewith made
available to the licensee may be communicated to third parties only with the
writtenpermissionofAVMBerlin.
Allsoftwareandthemanualhavebeenproducedwithallduecareandinspected
for correctness in accordance with the best available technology. AVM Berlin
disclaimsallliabilityandwarranties,whetherexpressorimplied,relatingtothis
product’squality,performanceorsuitabilityforaparticularpurposewhichdevia-
tesfromtheperformancespecificationscontainedintheproductdescription.
AVMBerlinwillnotbeliablefordamagesarisingdirectlyorindirectlyfromtheuse
ofthemanualorsoftware,norforincidentalorconsequentialdamages,exceptin
caseofintentorgrossnegligence. AVMexpresslydisclaims all liabilityforloss
ofordamagetohardware,softwareordataasaresultofdirectorindirecterrors
ordestructionandforanycosts,includingISDNconnectioncharges,related to
thesoftwareandmanualsuppliedandduetoincorrectinstallationsnotperfor-
med by AVM itself.
The information contained in this manual and the software it describes are
subjecttochangewithout notice forthepurposeoftechnicalimprovement.
Copyright1998AVMBerlin.Allrights reserved.
AVMAudiovisuellesMarketing AVM Computersysteme
undComputersystemeGmbH Vertriebs GmbH & Co. KG
Alt-Moabit95 Alt-Moabit95
10559Berlin 10559Berlin
AVM Data Call Center (ADC): AVM im Internet:
+49-(0)30/39 9843 00 (IDtrans-Protokoll) http://www.avm.de
ftp://ftp.avm.de
Trademark notice: AVM is a registered trademark of AVM Vertriebs KG.
WindowsisaregisteredtrademarkofMicrosoftCorporation.Allother
trademarksaretrademarksof theirrespectiveowners.

Contents
3
CONTENTS
1 Introduction ...................................................................... 5
Installation, Step by Step ............................................................................................ 6
Package Contents........................................................................................................ 7
FRITZ!X PC Requirements ........................................................................................... 10
Technical Data and Features ...................................................................................... 11
LEDs in FRITZ!X PC...................................................................................................... 12
Acoustic Signals ......................................................................................................... 13
2 FRITZ!X PC PBX Installation ........................................... 14
Installing FRITZ!X PC .................................................................................................. 14
Connecting the Cables ............................................................................................... 14
Connection of Analog Terminal Devices ..................................................................... 15
3 Software Installation ..................................................... 16
Installation of the CAPI Driver .................................................................................... 16
FRITZ!32 Installation .................................................................................................. 18
FRITZ!X PC Installation ............................................................................................... 19
4 FRITZ!X PC Configuration .............................................. 21
Factory Settings ......................................................................................................... 21
Assigning Telephone Numbers (MSNs) ..................................................................... 22
Call Diversion via the second B channal.................................................................... 26
Call Diversion to Another Number: Call Forwarding .................................................. 27
Communication with the PBX .................................................................................... 30

Contents
4
5 PBX Operation................................................................. 34
Outside Dialing ......................................................................................................... 34
Internal Dialing.......................................................................................................... 35
Call Waiting ............................................................................................................... 36
Call Hold .................................................................................................................... 36
Consultation Hold ..................................................................................................... 37
Routing ...................................................................................................................... 38
Conference Call ......................................................................................................... 38
Call Back When Busy ................................................................................................. 39
Pickup ....................................................................................................................... 40
Group Call ................................................................................................................. 40
Setting the the Hold Button Function......................................................................... 41
Pulse-dial Telephones with FRITZ!X PC....................................................................... 41
6 FRITZ!X PC and the Internet .......................................... 42
The Conception of the AVM System Drivers in MS Windows ..................................... 42
The AVM ISDN CAPI Port Driver ................................................................................. 42
The AVM NDIS WAN CAPI Driver ................................................................................ 43
Freedom of Connectivity............................................................................................ 44
Requirements at the Provider Site / Remote System ................................................ 45
ISDN CAPI Port Driver vs. NDIS WAN CAPI Driver ...................................................... 46
7 Tips & Tricks..................................................................... 47
Index.....................................................................................52
Symbols used in this manual:
Attention Lift receiver Dial
Note Replace Receiver Party

1 Introduction
5
1INTRODUCTION
FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC is a combined private exchange branch (PBX) and
ISDN controller which allows you to connect your computer and
four analog terminals to a Euro-ISDN line. Telephones, cordless
telephones, answering machines, fax machines, modems or any
other type of analogue terminal can connect to FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC to
take advantage of the advanced ISDN technology. Both touch-
tone terminals and pulse-dial terminals can be connected.
The ISDN Controller integrated in FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC and the FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32
communications software allow you to use your computer to
run data applications like ISDN data transfer, telefax (Group 3),
mailbox terminal, answering machine functions and internet
services.
Fig. 1 Connection of computer and analog terminal devices to ISDN
using FRITZ!X PC

1 Introduction
6
The configuration of the PBX can be defined using either the
FF
FF
FRR
RR
RITZ!X PC ConfigurITZ!X PC Configur
ITZ!X PC ConfigurITZ!X PC Configur
ITZ!X PC Configuration Pation P
ation Pation P
ation Prr
rr
rogrogr
ogrogr
ogramam
amam
am or via touch-tone
telephone.
ThismanualdescribestheconfigurationofthePBXusingtheFRITZ!X
PCconfigurationsoftware. ForinformationaboutconfiguringFRITZ!X
PC with your telephone, please see the PDF file CONFIG-
TELEPHON.PDF in the \:DOCS directory on the FRITZ!X PC CD-ROM.
Installation, Step by Step
This manual first describes installation, then configuration, and
finally, the operation of the PBX.
The four analog extensions (e.g. telephone and fax machine)
are ready for operation upon completion of the PBX installation.
To take advantage of all FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC functions and features,
including ISDN data transmission and the Internet, you must
install the FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32 software package as well.
Take note of the following order:
1. Unpack your package. The section „Package Contents“
illustrates and explains the function of all sockets, plugs
and cables.
2. Install the hardware.
3. Install the CAPI Driver.
4. Install the FF
FF
FRR
RR
RITZ!X PC ConfigurITZ!X PC Configur
ITZ!X PC ConfigurITZ!X PC Configur
ITZ!X PC Configuration Pation P
ation Pation P
ation Prr
rr
rogrogr
ogrogr
ogramam
amam
am.
5. Configure FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC
6. Install the FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32 communications software.
7. Install an AVM system driver.
Instructions about how to perform these steps are provided in
the following chapters.

1 Introduction
7
Package Contents
Once you have opened the box and unpacked its contents, you
will have the following items before you:
• 1 ISDN FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC PBX
•1
FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC CD-ROM with installation software
• 1 plug-in power supply unit with cable
• 1 ISDN cable
• 1 V.24 cable for connecting FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC to the computer
• 3 universal adapters, type RJ12/TAE
• 1 type RJ12/TAE-NFN adapter
•1
FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC manual
•1
FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32 manual
• 1 drilling template
TheFRITZ!XPCsockets,plugs,andcablesareillustratedanddiscussed
in the following sections.
Sockets
The following illustration is a rear view of FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC. Here you
see the socket connector with sockets for the supply connection,
the analog extensions, the computer and for the ISDN
connection.
Fig. 2 FRITZ!X PC Socket Connector
Power supply socket
Extension sockets
V.
2

1 Introduction
8
Plugs
The following plugs are used in FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC:
Fig. 3 Plug types
The majority of analog devices sold in Germany has a cable with
a TAE plug.
The FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC ISDN cable is equipped with an RJ45 plug on
both ends. The power cable also has an RJ45 plug.
Analog devices are connected to FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC with an RJ12 plug.
If your analog device is equipped with a TAE plug, this device
can be connected to FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC using one of the adapters
delivered with the product.
Cables
FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC is connected to ISDN by means of the ISDN cable to
the ISDN base terminal of the ISDN services provider.
Fig. 4 FRITZ!X PC ISDN Cable
TAE plug RJ45 plug RJ12 plug
ISDNcablewithtwoidentical
ISDN plugs(RJ45)

1 Introduction
9
The computer is connected to FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC with the computer
connection cable.
Fig. 5 FRITZ!X PC Computer Connection Cable
FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC is connected to the power network by means of the
plug-in power suppy unit.
Fig. 6 FRITZ!X PC Plug-in Power Supply Unit
Adapters
The type RJ12/TAE-NFN adapter allows several terminal devices
with TAE plugs to be connected to one FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC RJ12 socket.
The type RJ12/TAE universal adapter permits the connection of
terminal devices with TAE plugs to FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC RJ12 sockets.
These adapters also allow you to connect devices with non-
standard RJ12 connector pin assignments (a and b cores to pins
2 and 5 rather than 3 and 4).
Computer connection cable (V.24)
Power plug(RJ45)
Plug-in power supply unit

1 Introduction
10
Fig. 7 Adapters
Please note that the universal adapters can be used only to connect
terminaldevices. Ifbothsocketsoftheuniversaladapterareoccupied,
FRITZ!X PC will address the terminal device with theTAE plug. The
RJ12 socket then is deactivated automatically.
FRITZ!X PC Requirements
For smooth installation and operation of FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC, a number
of prerequisites must be met:
•FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PCis configured for use with a multiple-device ISDN
connection according to the Euro-ISDN protocol DSS1.
Operation with other connections may cause the unit to
malfunction.
• Only devices conforming to EN 60950 or a corresponding
standard may be connected to FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC.
To install the FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32communcations software and access the
Internet, your computer must fulfil the following requirements:
• IBM or 100% IBM-compatible computer with hard disk and
CD-ROM drive
• Pentium with frequency of at least 90 MHz and at least 16
MB working memory
• Microsoft Windows 95
RJ12 adapter socket for RJ12 pl
u
assignmentdeviation
RJ12 plug for extension socket
RJ12/TAE adapter socket
TAE-NFN adapter

1 Introduction
11
• A free serial interface (COM-Port) with a UART 16550 interface
chip and a throughput rate of at least 115 KBit/s. Most
computers build in or after 1996 are equipped with such an
interface chip. Contact your dealer or PC manufacturer for
more information.
Technical Data and Features
• ISDN PBX for connection to the Euro-ISDN (DSS1)
• Dimensions approx. 15 x 22 x 3 cm
• 4 extensions over RJ12 sockets
• 1 V.24 connection for the PC over a D-SUB 9 socket
• 1 Euro-ISDN connection via RJ45 socket
• 5 LEDs which signal the condition of the exchange
• 3 telephone numbers (MSNs) programmable for each
extension
• Hold, consultation hold, routing
• Pickup calls to other extensions
• Switching conversations
• Automatic outside dialing option
• Call waiting enable/disable
• Three-way conference calls
• Callback when busy
• Call Forwarding
• Call diversion via the second B channel
• Suppress caller ID
• Caller ID presentation for incoming calls
• Park calls on a bus
• Register Call Charges
• Quick-Dial Number Assignement

1 Introduction
12
• Operating voltage: 230 Volt / 50 Hertz
• Power input when idling: 5.6 Watt
• Maximum power input during operation: 9.5 Watt
• 33,600 bit/s data throughput rate for fax and modem
• CE certification 0170 X
LEDs in FRITZ!X PC
The operating condition of FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PCisindicated by five (LEDs).
The LEDs have the following meaning:
LL
LL
LEE
EE
EDD
DD
DColorColor
ColorColor
Color MeaningMeaning
MeaningMeaning
Meaning
PP
PP
Poo
oo
oww
ww
werer
erer
er green signalizes that FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC is ready for
operation.
1 - 41 - 4
1 - 41 - 4
1 - 4 orange indicates the condition of the extensions:
LED off: terminal device inactive at the
extension, or no device is connected.
LED on: terminal device active at the
extension.
LED blinking: extension is ringing.

1 Introduction
13
Acoustic Signals
01 2 3 4
Time in Seconds
Ring
Busy Signal
Internal Dial Tone
External Dial Tone
Acknowledgement
Negative Dismissal
Call Waiting
Calls
External Call
Internal Call
Callback
Acoustic Signals
The following illustration shows the duration and intervals of
the individual acoustic tones and call frequencies.
Table 1 Acoustic tones and call frequencies in FRITZ!X PC

2 FRITZ!X PC PBX Installation
14
2 FRITZ!X PC PBX INSTALLATION
This chapter describes the hardware installation: how to connect
FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC to ISDN, the computer and the power network, and
how to connect analog devices to FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC.
For a schematic diagram of the connection options, along with
illustrations of the cables, plugs and sockets, see Chapter 1
„Introduction“.
Installing FRITZ!X PC
FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC should be set up or hung up in an appropriate
location. This location should be dry, and free from both dust
and direct sunlight.
The extension sockets on the rear panel of FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC should
be accessible at at all times. Make sure that the connecting
lines are not kinked, stretched or subjected to any weight.
Connecting the Cables
Proceed as follows to connect the cables:
1. Position FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC so that the socket connector is facing
you.
2. To connect FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC to ISDN, pick up the ISDN cable, and
insert one end into the ISDN connection socket at the far
right of the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC socket connector. Insert the other
end in the socket of your ISDN connection.
3. Pick up the computer connection cable and insert the
appropriate end into the V.24 socket (labeled „SERIAL“) on
the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC socket connector. Insert the other end into
a free serial connection (COM Port) on your computer.
4. To connect FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PCtothe power supply, pick up the plug-
in power supply unit and insert the RJ45 plug into the socket
at the far left of the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC socket connector. Insert the
other end into the power supply socket.

2 FRITZ!X PC PBX Installation
15
Note the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC LEDs: the green „POWER“ LED signalizes
that FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC is ready for operation.
FRITZ!X PC is now turned on and ready for operation. The FRITZ!X
PC PBX does not have a power switch.
Once installation has been completed, FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC will operate
by default with its factory settings. For information on how to
adapt FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC to your own demands and needs, please see
Chapter 4 „FRITZ!X PC Configuration“.
FRITZ!X PC’s reaction to a power outage or to being disconnected
from the power supply is described in Chapter 7 „Tips &Tricks“.
Connection of Analog Terminal Devices
FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC is certified according to the regulations of the
German Federal Office for Post and Telecommunications and
thus allows the connection of any analog telecommunications
devices which conform to the standards of approval or have been
granted general certification.
To connect analog devices (telephone, telefax machine, answe-
ring machine or modem) to FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC, insert the TAE plug of
your telephone into the appropriate socket of an adapter (this
is not necessary if the telephone is equipped with a RJ12 socket).
The adapter’s RJ12 plug then must be inserted into one of the
four extension sockets on FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC.

3 Software Installation
16
3SOFTWARE INSTALLATION
The FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32communications software (for file transfer, fax and
answering machine) cannot be used until the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC driver
software with the COMMON-ISDN-API (CAPI) 2.0 ISDN interface
is installed. Once this has been completed you can install
FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32.
All components can be installed with the installation help on
the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PCCD-ROM. These help files will guide you through
the installation and give you various installation tips.
The installation help starts automatically when you insert the
CD-ROM in your CD drive. You can start the installation help
manually as well, by clicking on the „INTRO.HLP“ file in Win-
dows Explorer.
Installation of the CAPI Driver
PleasenotethatyoucaninstallonlyoneCAPIDriveronyourcomputer.
If you have had other ISDN adapters installed on your computer in
thepast,thesemustbedeinstalledbeforeyoucaninstalltheFRITZ!X
PC CAPI Driver.
To install the CAPI Driver software on your computer, proceed
as follows:
1. Insert the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC CD-ROM in your CD drive.
2. Click on the CAPI icon in the second window of the CD-ROM
introduction and then on the SS
SS
Startar
tartar
tart Installationt Installation
t Installationt Installation
t Installation button on
the next page. An overview of the available hardware
components will be displayed. Mark the Other Componen-Other Componen-
Other Componen-Other Componen-
Other Componen-
tsts
tsts
ts option and click NextNext
NextNext
Next. Wait a moment for the next window
to appear.
3. Click on the Diskette...Diskette...
Diskette...Diskette...
Diskette...button in this window and then enter
the path for the installation files, e.g.
D:\CARDWARE\WINDOWS.95, if D: is your CD drive.
4. In the next window FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC is recognized as a hardware
component and is displayed. Click NextNext
NextNext
Next.

3 Software Installation
17
5. A warning appears, informing you that Windows now can
install the hardware. Confirm with NextNext
NextNext
Next.
6. The Add New HardwareWizard now will copy the installation
files from the CD-ROM into a temporary directory. Once this
procedure has been completed, the log-in window of the set-
up program will appear. Click NextNext
NextNext
Next. You can end installation
at any time with the CancelCancel
CancelCancel
Cancel button.
7. Select the „Installation“ option in the following window and
click NextNext
NextNext
Next.
8. In the next window enter the directory to which the CAPI
driver software is to be installed. The directory C:\IDRIVER
is suggested by default, but you are free to enter any other
preferred directory. Once your entries are complete, click
the ContinueContinue
ContinueContinue
Continue button.
9. In the next window, enter the serial connection (COM port)
to which the V.24 cable is attached. Confirm with ContinueContinue
ContinueContinue
Continue .
The installation program now copies all files to the specified
directory. The driver will be entered in the registry so that
the CAPI Driver software is activated automatically whenever
Windows 95 is started.
10. After installation has been completed successfully, the
settings are displayed in an information window. Confirm
with OKOK
OKOK
OK.
11. A window will tell you to re-start Windows 95. Confirm this
command by clicking YY
YY
Yeses
eses
es.
Once Windows 95 has been re-started, the Program Files line in
the Start menu shows a new directory with the title „AVM”.
The Readme file in this directory contains current information about
the CAPI driver software. Use the „FRITZ!X PC Setup“ program to
make any subsequent changes to the COM port.

3 Software Installation
18
Removing the CAPI Driver
Should you wish to remove the CAPI Driver software from your
computer at some later date, open the „Software“ directory in
the Windows Control Panel. Mark the „FRITZ!X PC V.24-ISDN“
entry and click the Add/RAdd/R
Add/RAdd/R
Add/Remoemo
emoemo
emovv
vv
vee
ee
e button to start the de-
installation program. Confirm the security warning with
ContinueContinue
ContinueContinue
Continue. Upon completion you will be commanded to re-start
the computer. Re-start your computer to implement the system
changes.
Connecting FRITZ!X PC and other Devices/Applications to the
Same COM Interface
In the following cases, the COM interface assigned whenever
Windows 95 starts will be occupied by FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC alone:
- when an application has established an ISDN connection;
- when an application is waiting for incoming calls;
- when the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC Configuration program was run.
If none of the above apply, other programs can share the COM
interface on which the CAPI Driver was installed.
FRITZ!32 Installation
For the installation of FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32, see the FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32 manual
included in the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC package. The Chapter „Install
FRITZ!32“ provides detailed installation instructions.
Check Settings!
Afterinstallation,checkthe„Settings“intheFRITZ!faxandFRITZ!vox
programs:
If FF
FF
FRR
RR
RITZ!faxITZ!fax
ITZ!faxITZ!fax
ITZ!fax is ready and the option „All Incoming Faxes“ on the
„ISDN“ tab is selected, the analog extensions of FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC
cannot receive any calls.

3 Software Installation
19
If FF
FF
FRR
RR
RITZ!vITZ!v
ITZ!vITZ!v
ITZ!voo
oo
oxx
xx
x is ready and the option „all incoming calls“ on the
„ISDN“ tab is selected, FF
FF
FRR
RR
RITZ!vITZ!v
ITZ!vITZ!v
ITZ!voo
oo
oxx
xx
x eventually will take all calls,
such that no more calls reach the analog extensions of FF
FF
FRR
RR
RITZ!XITZ!X
ITZ!XITZ!X
ITZ!X
PCPC
PCPC
PC. The time interval after which FF
FF
FRR
RR
RITZ!vITZ!v
ITZ!vITZ!v
ITZ!voo
oo
oxx
xx
x takes calls is
specified on the „Answering Profile“ tab in the „Settings“ menu.
Setting the Serial Interface
To optimize the transfer speed of the serial interface, it is
advisable to make the following change after installing the
FF
FF
FRR
RR
RITZ!32ITZ!32
ITZ!32ITZ!32
ITZ!32 software in Windows 95:
Open the Windows 95 Control Panel (Start/Settings) and double-
click on the „System“ icon. In the „Device Manager“ tab, double-
click on the implemented interface in the „COM Port“ list.
On the „Connecting Settings“ tab, click EE
EE
Expanded...xpanded...
xpanded...xpanded...
xpanded...and set the
position marker for the receive buffer to „Low (1),“ and the
position marker for the send buffer to „High (16)“. Confirm the
following dialogs with OKOK
OKOK
OK.
FRITZ!X PC Installation
The user-friendly interface of the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC Installation
ConfigurConfigur
ConfigurConfigur
Configuration Pation P
ation Pation P
ation Prr
rr
rogrogr
ogrogr
ogramam
amam
am simplifies the setup of your PBX.
Install the FF
FF
FRR
RR
RITZ!X PC ConfigurITZ!X PC Configur
ITZ!X PC ConfigurITZ!X PC Configur
ITZ!X PC Configuration Pation P
ation Pation P
ation Prr
rr
rogrogr
ogrogr
ogramam
amam
am by following the
introduction on the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC CD-ROM. This introduction
guides you through the installation with tips and information.
The introduction starts automatically when the CD-ROM is
inserted into your CD drive. You can start the installation help
manually as well, by clicking on the „INTRO.HLP“ file in Win-
dows Explorer.
Proceed with installation as follows:
1. Insert the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC CD-ROM in your CD drive.
2. Click on the icon for the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC ConfigurConfigur
ConfigurConfigur
Configuration Pation P
ation Pation P
ation Prr
rr
rogrogr
ogrogr
ogramam
amam
am
on the second page of the CD-ROM introduction.

3 Software Installation
20
3. Start the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC installation by clicking on the SS
SS
Startar
tartar
tartt
tt
t
InstallationInstallation
InstallationInstallation
Installation button on the next page. The program prepares
the Setup Assistant for FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC installation.
4. First you will be asked to specify the directory in which the
FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC ConfigurConfigur
ConfigurConfigur
Configuration Pation P
ation Pation P
ation Prr
rr
rogrogr
ogrogr
ogramam
amam
am is to be installed.
Although a default entry of C:\PROGRAM FILES\FRITZ!XPC is
suggested, you are free to specify any directory you wish.
5. Now you will be asked to specify the program group to which
the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC ConfigurConfigur
ConfigurConfigur
Configuration Pation P
ation Pation P
ation Prr
rr
rogrogr
ogrogr
ogramam
amam
am is to belong. The
default setting is „FRITZ!X PC,“ but you are free to enter
another name for the program group or select an existing
program group from the list. Click ContinueContinue
ContinueContinue
Continue to proceed with
installation. The files will be copied to your hard disk.
Installation of the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC ConfigurConfigur
ConfigurConfigur
Configuration Pation P
ation Pation P
ation Prr
rr
rogrogr
ogrogr
ogramam
amam
am has been
completed. Now you can start the program from the „AVM“
directory in the start menu.
Removing FRITZ!X PC
Should you wish to remove the FF
FF
FRR
RR
RITZ!X PCITZ!X PC
ITZ!X PCITZ!X PC
ITZ!X PC Configuration Pro-
gram from your computer, open the „Software“ directory in the
Windows Control Panel. Mark the entry „FRITZ!X PC“ and then
click the Add/RAdd/R
Add/RAdd/R
Add/Remoemo
emoemo
emovv
vv
vee
ee
e button. The uninstallation program
starts. Confirm the security warning with ContinueContinue
ContinueContinue
Continue. In a final
dialog you will be commanded to re-start your computer. Re-
start your computer to implement the changes in your computer
system.