AXIOMTEK rBOX310-FL User manual

4 9416M310010E
©Copyright 2013 Axiomtek Co., Ltd.
Version A1 December 2013
Printed in Taiwan
Installing the Hard Disk Drive
Step 1 Turn off the system.
Step 2 Loosen these screws, and remove the cover from the
system.
Step 3 Loosen these screws and remove the Hard Disk Drive
fixing bracket.
Step 4 Insert the Hard Disk Drive into the socket until it is firmly
seated. Put the Hard Disk Drive fixing bracket back to the
system, and fasten screws tight close the Hard Disk Drive
fixing bracket.
Step 5 Put the cover back to the system, and fasten screws tight
close the chassis.
rBOX310-FL Quick Installation Guide
9416M310010E 1
©Copyright 2013 Axiomtek Co., Ltd.
Version A1 December 2013
Printed in Taiwan
Checklist
rBOX310-FL System Unit x 1 Power terminal block x 1
rBOX310-FL Quick
Installation Guide x 1 CD x 1 (for Driver and User’s Manual)
Thermal Pad for Memory x 1 Din-rail Kit x1
Screws
Note: Please contact your local vendors if any damaged or missing items.
Dimensions
rBOX310-FL Robust Din-rail Fanless Embedded System

2 9416M310010E
©Copyright 2013 Axiomtek Co., Ltd.
Version A1 December 2013
Printed in Taiwan
I/O Outlets
The following figures show you I/O outlets on front view and top view of the
rBOX310-FL.
Front View
Top View
9416M310010E 3
©Copyright 2013 Axiomtek Co., Ltd.
Version A1 December 2013
Printed in Taiwan
Installing the Memory Module
Step 1 Turn off the system.
Step 2 Loosen these screws, and remove the top cover from the
system.
Step 3 Take the thermal pad from the package, take off the masks of
the thermal pad from two sides and paste thermal pad to the
bottom side of the memory module as bellow fingers.
Step 4 Using two fingers to hold the memory module, and insert
the gold colored contact into the socket. Push the module
down, and we recommend using “LDC737”silicone on
the two sides of the memory for good ability of vibration.
Step 5 T
ake off the memory thermal mask from the cover back.
Step 6 Close the cover to the chassis, and fasten all screws.