AXIOMTEK FAB111-7B1P4 User manual

FAB111-7B1P4 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Apr 2010
Printed in Taiwan
9419B111010E
4
Board Dimensions
FAB111-7B1P4 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Apr 2010
Printed in Taiwan
9419B111010E
1
I. Checklist
9FAB111-7B1P4 7-Slot ATX-Supported
PICMG 1.3 Bus Backplane x 1
9Quick Installation Guide x 1
Note1: Please contact your local vendors if any damaged or missing items.
DO NOT apply power to the board if any damaged components.
II. Jumper List
Jumper Description
JP1 Open : ATX by CPU Card
Short : ATX Power Always On
JP2
(Reserved)
Auto : Power Button
Open : Disable
Short : Enable
III. Connectors
Connector Description
CN1 ATX Power Connector
CN2 12V 8Pin(+12V Auxiliary Power Connector)
CN3 8-Pin Power Connector for thermal board
CN4 SM Bus Connector
CN5,CN6,CN7 (Reserved) COM Ports and DIO Connector (Optional)
CN8,CN9,CN10,CN11(Reserved) Thermal sensor Connector For FAN1;FAN2
&FAN3;FAN4(Optional)
USB1,USB2 USB 0,1,2,3
PWRBT1 ATX Power button connector
HWRST1 Hardware Reset Connector
FAN1,FAN2,FAN3,FAN4 FAN Connector
SHB1 – SHB4 PICMG 1.3 Full-SIZE SBC Slot
PCI1-PCI4 PCI Slots 32-bit/33MHz
PCIE1 X16 PCIe Slot
PCIEB1 X4 PCIe Slot (Note 2)
VR1,VR2,VR3,VR4 (Reserved) Temperature Selection For FAN
Control(Optional)

FAB111-7B1P4 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Apr 2010
Printed in Taiwan
9419B111010E
2
24-Pin ATX Power Connector (CN1)
Pin Signal Cable
Color Pin Signal Cable Color
1 3.3V Brown 13 3.3V Brown
2 3.3V Brown 14 -12V Blue
3 GND Black 15 GND Black
4 5V Red 16 PS_ON Green
5 GND Black 17 GND Black
6 5V Red 18 GND Black
7 GND Black 19 GND Black
8 PWOK Orange 20 -5V White
9 5VSB Purple 21 5V Red
10 12V Yellow 22 5V Red
11 12V Yellow 23 5V Red
12 3.3V Brown 24 GND Black
8Pin +12V Auxiliary Power Connector (CN2)
Pin Signal Cable
Color Pin Signal Cable Color
1 GND Black 5 12V Yellow
2 GND Black 6 12V Yellow
3 GND Black 7 12V Yellow
4 GND Black 8 12V Yellow
Power Output Connector (CN3)
Pin Signal Pin Signal
1 GND 5 -5V
2 GND 6 5V
3 5VSB 7 -12V
4 3.3V 8 12V
FAB111-7B1P4 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Apr 2010
Printed in Taiwan
9419B111010E
3
SM Bus Connector (CN4)
Pin Signal
1 SM_CLK
2 SM_DAT
3 GND
Power ON/OFF Push Button Connector (PWRBT1)
Pin Signal
1 PWR_BT
2 GND
Hardware Reset Connector (HWRST1)
Pin Signal
1 HW_RST
2 GND
FAN Connector (FAN1,FAN2,FAN3,FAN4)
Pin Signal
1 GND
2 +12V
3 N.C or Rotation
Detection (Reserved)
USB Connectors (USB1, USB2)
Pin Signal Pin Signal
1 USB Power 2 USB Power
3 USB P0- 4 USB P1-
5 USB P0+ 6 USB P1+
7 USB GND 8 USB GND
10 GND
Note 2: Follow by PICMG1.3 standard, The ports for the B[3:0] link was
configured to one x4 PCIe(PCIEB1 slot on BP), The x4 PCIe link is
able to support x1 and x4. If the x4 PCIe slot can not support x4
PCIe card, please contact your SBC Card vender first.