AXIOMTEK SHB105 Series User manual

SHB105 Series Quick Installation Guide
©Copyright 2011 Axiomtek Co., Ltd.
Version A2 November 2011
Printed in Taiwan
9418C105020E
4
V. Board Layout
CN28
CN29 CN10
CN19
Please refer to the SHB105 Product Information CD for the complete User’s Manual, drivers and utilities.
SHB105 Series Quick Installation Guide
©Copyright 2011 Axiomtek Co., Ltd.
Version A2 November 2011
Printed in Taiwan
9418C105020E
1
I. Checklist
9CPU Board x 1
9Quick Installation Guide x 1
9Product Information CD-ROM x 1
9SATA Cable x 1
9COM , Printer Port Cable with Bracket, Pitch=2.0mm x 1
Note: Please contact your local vendors if any damaged or missing
items. DO NOT apply power to the board if any damaged
components.
II. Jumper Settings
Before applying the power to SHB105 Series, please make sure
all jumper settings are defaulted as the following table:
JUMPER DEFAULT SETTING
JP1 Audio Line Out/Speaker Out : Line Out Short 1-3, 2-4
JP2 COM1 Operate Mode Select : RS-232 Short 1-2
JP3 COM1 Operate Mode Select : RS-232 Short 3-5,4-6
JP4 COM1 Operate Mode Select : RS-232 Short 3-5,4-6
JP5
CPU Clock:133Mhz Short 1-2
JP6 TPM Setting Short 1-2
JP7 ME Manufacture Mode Short 1-2,
JP8 Clear CMOS Short 1-3
JP9 Auto Power Button On Short 1-2
JP10 TPM Setting Short 2-3
Please refer to the SHB105 Product Information CD for the complete User’s Manual, drivers and utilities.

SHB105 Series Quick Installation Guide
©Copyright 2011 Axiomtek Co., Ltd.
Version A2 November 2011
Printed in Taiwan
9418C105020E
2
III. Connectors
Connector Label Connector Label
Audio Connector CN1 LAN1 External LED CN19
COM2 CN3 LAN1 Output Port CN20
FDD CN4 USB Port 2/3 CN21
CPU ATX 12V IN CN5 USB Port 4/5 CN22
COM1 CN6 VGA Port CN23
Parallel Port CN7 Display Port
(Option) CN24
AUX FAN CN8 USB Port 6/7 CN25
SYS FAN CN9 AXIOMTEK Front
Panel CN26
LAN2 External LED CN10 Mouse CN28
SATA 0 CN11 Keyboard CN29
SATA 2 CN12 CPU FAN CN30
SATA 4 CN13 USB Port 1 USB1
Lan2 Output Port CN14 USB Port 2 USB2
SMBUS CN15 DDRIII CHA DIMM0 DIMMA
SATA 1 CN16 DDRIII CHB DIMM0 DIMMB
SATA 3 CN17
SATA 5 CN18
Please refer to the SHB105 Product Information CD for the complete User’s Manual, drivers and utilities.
SHB105 Series Quick Installation Guide
©Copyright 2011 Axiomtek Co., Ltd.
Version A2 November 2011
Printed in Taiwan
9418C105020E
3
IV. Front Panel Connector
Power LED
This 3-pin connector denoted as Pin 1 and Pin 5 connects the
system power LED indicator to such a switch on the case. Pin 1
is assigned as +, and Pin 5 as -. The Power LED lights up when
the system is powered ON.
External Speaker and Internal Buzzer Connector
Pin 2, 4, 6 and 8 can be connected to the case-mounted
speaker unit or internal buzzer. While connecting the CPU card
to an internal buzzer, please short pins 2-4; while connecting to
an external speaker, you need to set pins 2-4 to Open and
connect the speaker cable to pin 8 (+) and pin 2 (-).
ATX Power On/Off Button
This 2-pin connector denoted as Pin 9 and 10 connects the front
panel’s ATX power button to the CPU card, which allows users
to control ATX power supply to be power on/off.
System Reset Switch
Pin 11 and 12 can be connected to the case-mounted reset
switch that reboots your computer instead of turning OFF the
power switch. It is a better way to reboot your system for a
longer life of the system’s power supply.
HDD Activity LED
This connection is linked to hard drive activity LED on the
control panel. LED flashes when HDD is being accessed. Pin 13
and 14 connect the hard disk drive to the front panel HDD LED,
Pin 13 assigned as -, and Pin 14 as +.
Please refer to the SHB105 Product Information CD for the complete User’s Manual, drivers and utilities.