AXIOMTEK SBC81206 Series User manual

SBC81206 Series Quick Installation Guide
©Copyright 2008 AXIOMTEK Co., Ltd.
Version A1 December 2008
Printed in Taiwan
94181206010E
4
V. Board Layout
Please refer to the SBC81206 Product Information CD for the complete User’s Manual, drivers and utilities.
SBC81206 Series Quick Installation Guide
©Copyright 2008 AXIOMTEK Co., Ltd.
Version A1 December 2008
Printed in Taiwan
94181206010E
1
I. Checklist
9SBC81206 Socket 775 All-In-One
Board x 1
9Quick Installation Guide x 1
9Product Information CD-ROM x 1
9COM & Printer Port Cable with
Bracket, Pitch=2.54mm x 1
92-pin Jumper Cap, Pitch=2.0mm x 5
9SATA Cable x 1
Note: Please contact your local vendors if any damaged or missing items.
DO NOT apply power to the board if any damaged components.
II. Jumper Settings
Before applying the power to SBC81206 Series, please make sure
all jumper settings are defaulted as the following table:
Description Function Jumper Setting
RS-232
(Default)
JP3 JP2 JP1
RS-422 JP3 JP2
JP1
COM2
RS-485 JP3 JP2
JP1
Normal
(Default)
JP7
CMOS Clear
Clear
CMOS
JP7
Please refer to the SBC81206 Product Information CD for the complete User’s Manual, drivers and utilities.

SBC81206 Series Quick Installation Guide
©Copyright 2008 AXIOMTEK Co., Ltd.
Version A1 December 2008
Printed in Taiwan
94181206010E
2
Description Function Jumper Setting
ATX Auto
Power On/Off
Disable
(Default)
JP6
Enable
JP6
III. Connectors
Connector Label Connector Label
SM BUS Connector CN1 LAN1 Link/Active & Speed
LED Connector CN6
LAN2 Link/Active &
Speed LED Connector CN7 USB Port2 Connector USB4
ATX 4 Pin 12V In CN2 LAN1 Connector LAN1
Front Panel Connector CN3 LAN2 Connector LAN2
AXIOMTEK ACPI
Connector CN4 VGA Connector VGA1
PS/2 KB/MS Connector
(Optional) CN5 DDRII Long-DIMM Sockets DDR1~2
Parallel IDE Connector IDE1 System FAN Connector 1 FAN1
Floppy Connector FDD1 CPU FAN Connector FAN2
Printer Port Connector PRINT1 System FAN Connector 2 FAN3
Serial Port1 Connector COM1 Internal PS/2 Keyboard
Connector KB1
Serial Port2 Connector COM2 Internal PS/2 Mouse
Connector MS1
USB Port4/5 Connector USB1 Intel®HD Audio Digital
Header (Optional) HDA1
USB Port2/3 Connector USB2 Serial ATA Port Connectors SATA1~4
USB Port1 Connector USB3
Please refer to the SBC81206 Product Information CD for the complete User’s Manual, drivers and utilities.
SBC81206 Series Quick Installation Guide
©Copyright 2008 AXIOMTEK Co., Ltd.
Version A1 December 2008
Printed in Taiwan
94181206010E
3
IV. Front Panel Connector
Power LED
This 3-pin connector denoted as Pin 1 and Pin 5 connects the system power
LED indicator to such a switch on the case. Pin 1 is assigned as +, and Pin 5 as
-. The Power LED lights up when the system is powered ON.
External Speaker and Internal Buzzer Connector
Pin 2, 4, 6 and 8 can be connected to the case-mounted speaker unit or internal
buzzer. While connecting the CPU card to an internal buzzer, please short pins
2-4; while connecting to an external speaker, you need to set pins 2-4 to Open
and connect the speaker cable to pin 8 (+) and pin 2 (-).
ATX Power On/Off Button
This 2-pin connector denoted as Pin 9 and 10 connects the front panel’s ATX
power button to the CPU card, which allows users to control ATX power supply
to be power on/off.
System Reset Switch
Pin 11 and 12 can be connected to the case-mounted reset switch that reboots
your computer instead of turning OFF the power switch. It is a better way to
reboot your system for a longer life of the system’s power supply.
HDD Activity LED
This connection is linked to hard drive activity LED on the control panel. LED
flashes when HDD is being accessed. Pin 13 and 14 connect the hard disk drive
to the front panel HDD LED, Pin 13 assigned as -, and Pin 14 as +.
Please refer to the SBC81206 Product Information CD for the complete User’s Manual, drivers and utilities.