Axis A8004-VE User manual

AXIS A8004-VE installation
Relay powered by PoE (12V)
Configure relay state in AXIS A8004-VE
built-in web pages
Relay Door DoorRELAY1
NamePort TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
Depending on your lock type, congure the following values
for RELAY, and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
1.
2.
-NO/
NC
NO/
NC
CO CO12V
PoE+ Switch

AXIS A8004-VE installation
Two lock relays powered by PoE (12V)
Relay Door 2RELAY2 Open circuitOpen circuit
Relay Door 1 DoorRELAY1
NamePort TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
Configure relay state in AXIS A8004-VE
built-in web pages
To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
Depending on your lock type, congure the following values
for RELAY, and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
1.
2.
-NO/
NC
NO/
NC
CO CO12V
Door 1 Door 2
PoE+ Switch

AXIS A8004-VE installation
One relay powered by PoE (12V), one relay powered by
external power supply (max 0.7A at 30V)
Relay Door 2RELAY2 Open circuitOpen circuit
Relay Door 1 DoorRELAY1
NamePort TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
Configure relay state in AXIS A8004-VE
built-in web pages
To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
Depending on your lock type, congure the following values
for RELAY, and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
1.
2.
-NO/
NC
NO/
NC
CO CO12V
Power
supply
Door 1 Door 2
PoE+ Switch

AXIS A8004-VE installation
One relay powered by PoE (12V), one relay potential-free
contact (door chimes etc.)
Relay OtherRELAY2 Open circuitOpen circuit
Relay Door DoorRELAY1
NamePort TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
Configure relay state in AXIS A8004-VE
built-in web pages
To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
Depending on your lock type, congure the following values
for RELAY, and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
1.
2.
-NO/
NC
NO/
NC
CO CO12V Potential-free
contact
PoE+ Switch

AXIS A8004-VE installation
Power 12V fail-secure lock by PoE+ from door station
Configure relay state in AXIS A8004-VE
built-in web pages
Relay Door DoorRELAY1
NamePort TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
Depending on your lock type, congure the following values
for RELAY, and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
1.
2.
-IO2IO13V
-NO/
NC
NO/
NC
CO CO12V
I/O
REL
12V
24V
V+
COM
NO
NC
REX
PoE+ Switch

AXIS A8004-VE installation
Power 24V fail-secure lock by PoE+ from door station
Configure relay state in AXIS A8004-VE
built-in web pages
Relay Door DoorRELAY1
NamePort TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
Depending on your lock type, congure the following values
for RELAY, and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
1.
2.
I/O
REL
V+
COM
NO
NC
REX
-IO2IO13V
-NO/
NC
NO/
NC
CO CO12V
12V
24V
PoE+ Switch

AXIS A8004-VE installation
Power 12V fail-secure lock by external power supply
Configure relay state in AXIS A8004-VE
built-in web pages
Relay Door DoorRELAY1
NamePort TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
Depending on your lock type, congure the following values
for RELAY, and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
1.
2.
I/O
REL
V+
COM
NO
NC
REX
-IO2IO13V
-NO/
NC
NO/
NC
CO CO12V
12V
24V
PoE+ Switch
Max 30V,
Max 1.2A
Power
supply