Axis 2N LTE Verso Instruction sheet

www.2n.cz
2N LTE Verso
®
Modular LTE Intercom
Configuration Manual
Firmware: 2.30
Version: 2.30

The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of
telecommunications equipment.
The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways,
private branch exchanges (PBX), and door and lift communicators. 2N
TELEKOMUNIKACE a.s. has been ranked among the Czech top companies for years
and represented a symbol of stability and prosperity on the telecommunications
market for almost two decades. At present, we export our products into over 120
countries worldwide and have exclusive distributors on all continents.
2N is a registered trademark of 2N TELEKOMUNIKACE a.s. Any product and/or other
®
names mentioned herein are registered trademarks and/or trademarks or brands
protected by law.
2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find
information and to answer your questions about 2N products and services. On www.
faq.2n.cz you can find information regarding products adjustment and instructions for
optimum use and procedures „What to do if...".
2N TELEKOMUNIKACE a.s. hereby declares that the 2N product complies with all
basic requirements and other relevant provisions of the 1999/5/EC directive. For the
full wording of the Declaration of Conformity see the CD-ROM (if enclosed) or our
website at www.2n.cz.
The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All
development, production and distribution processes of the company are managed by
this standard and guarantee a high quality, technical level and professional aspect of
all our products.

2N TELEKOMUNIKACE a.s., www.2n.cz 3/211
Content:
1. Product Overview
2. Express Wizard for Basic Settings
3. Model Differences and Function Licensing
3.1 Function Licensing
4. Signalling of Operational Statuses
5. Intercom Configuration
5.1 Status
5.2 Directory
5.3 Hardware
5.4 Services
5.5 System
5.6 Used Ports
6. Supplementary Information
6.1 Troubleshooting
6.2 Directives, Laws and Regulations
6.3 General Instructions and Cautions

2N TELEKOMUNIKACE a.s., www.2n.cz 4/211
1. Product Overview
he are a successful substitute for classic Speakerphone bell T 2N LTE door intercoms
button panels and complex circuitry of bells and domestic phones where structured
cabling cannot be deployed. The intercoms render more sophisticated and extensive
services than standard domestic phones. The intercom is easy to install - all you have
to do is insert a SIM card, connect a power supply and set necessary parameters via
the My2N portal.
Thanks to the integrated SIP protocol, the intercom can make use of all VoIP services:
call forwarding at absence (to another office, VoiceMail or a cellular phone) or call
transfer (from the secretary’s office to the required person, e.g.).
The intercoms are equipped with a programmable number of quick dial buttons for
speed calling to the users whose numbers are included in the intercom Users list. Each
of the quick dial buttons can be assigned up to three phone numbers, which can be
dialled in parallel or sequentially. Thanks to an integrated time sheet it is possible to
configure each of the buttons in such a way that the called party is always accessible
and/or calls to selected phone numbers can be barred off the working hours.
Some models are equipped with a numeric keypad, which can be 2N LTE intercom
used as a code.
The can be equipped with an RFID card reader for authorised 2N LTE intercoms
access control and thus become a key part of your surveillance or attendance control
systems.
The are equipped with a relay switch (and, optionally, other relays 2N LTE intercoms
and outputs), which controls the electric lock or other equipment connected to the
intercom. Its activation time and method can be programmed flexibly: it can be
activated by a code, automatically by a call, by pressing a button, and so on.

2N TELEKOMUNIKACE a.s., www.2n.cz 5/211
The following symbols and pictograms are used in the manual:
Safety
Always abide by this information to prevent persons from injury.
Warning
Always abide by this information to prevent damage to the device.
Caution
Important information for system functionality.
Tip
Useful information for quick and efficient functionality.
Note
Routines or advice for efficient use of the device.

2N TELEKOMUNIKACE a.s., www.2n.cz 6/211
2. Express Wizard for Basic
Settings
Device Setting
Make sure that your device is properly installed and connected to My2N before
logging in to the intercom configuration interface. Log in to My2N at https://my2n.com
and add your intercom to the . You have to enter your 2N Remote Configuration
®
My2N security code during login - find the code in the card provided in the intercom
package. Get access to the intercom web configuration interface via the 2N Remote
®
Configuration.
Use the name and password (i.e. default reset password) for your first login admin 2n
to the configuration interface.
We recommend you to change the default password upon your first login.
The intercom requires a password change upon the first login. Strong passwords are
only accepted: eight characters at least including one capital letter, one small letter
and one digit.

2N TELEKOMUNIKACE a.s., www.2n.cz 7/211
Remember the new password well or put it down just in case. Because if you forget
the password, you will have to reset the intercom to default values (refer to the
Installation Manual of your intercom model) and lose all your current configuration
changes.
Firmware Update
We also recommend you to update your intercom firmware upon the first login to the
intercom. Refer to for the latest firmware version. Press the www.2n.cz Update
button in the menu to upload firmware. The intercom Firmware System Maintenance /
will get restarted upon upload and only then the updating process will be complete.
The process takes about 30 seconds.
SIP Server Connection Setting
The intercom is automatically configured for making calls via the My2N 2N Mobile
®
Video service. To use another VoIP infrastructure, set the necessary parameters in the
menu.Services Phone SIP / /
Display name – set the name to be displayed as CLIP on the called party's
phone, in the login window and on the web interface start page.
Phone number (ID) – set the intercom phone number (or another unique ID
composed of characters and digits) to identify the intercom uniquely in calls and
registration.
Domain – set the domain name of the service with which the intercom is
registered. Typically, it is equivalent to the SIP Proxy or Registrar address. If you
do not use a SIP Proxy in your intercom installation, enter the intercom IP
address.
If you use a SIP server (Proxy, Registrar), set the addresses for the following network
elements:

2N TELEKOMUNIKACE a.s., www.2n.cz 8/211
Proxy address – set the SIP Proxy IP address or domain name.
Registrar address – set the SIP Registrar IP address or domain name. The SIP
Proxy and SIP Registrar addresses are usually identical.
Registration enabled – enable intercom registration with the set SIP Registrar.
If your SIP server requires authentication of terminal equipment, enter the following
parameters:
Password – enter the password for intercom authentication.
Quick Dial Button Settings
All the models are equipped with quick dial buttons. If you press a 2N LTE intercom
quick dial button, a call will be set up to the phone number assigned to the respective
Users list position.
In the menu is displayed the list of all potentially available Hardware / Buttons
intercom buttons including those physically absent. In some intercom models, the
button list is divided into 8/5-item groups corresponding to the button extending
modules. Click
, select the user and press Add to add a user to the editing field. To search a user in the list, use the fulltext
field and the username. One quick dial button can be shared by multiple users.

2N TELEKOMUNIKACE a.s., www.2n.cz 9/211
You can also use the with one or more IP phones without a SIP 2N LTE intercom
server. Use the for outgoing calls and enter the called phone SIP Direct SIP Call
address (sip:phone_number@phone_ip_address) instead of the phone number.

2N TELEKOMUNIKACE a.s., www.2n.cz 10/211
Electric Lock Switching Settings
An electric lock can be attached to the intercoms and controlled by a code 2N LTE
from the intercom numeric keypad, or a code from the IP phone keypad during a call.
Connect the electric lock as instructed in the Installation Manual of your intercom
model.
Enable the switch in the parameter in the Switch Enabled Hardware Switches / /
tab, set the to the intercom output to which the electric Switch 1 Controlled Output
door lock is connected. Now set one or more activation codes for the electric door
lock switching.

2N TELEKOMUNIKACE a.s., www.2n.cz 11/211
3. Model Differences and
Function Licensing
Here is what you can find in this section:
3.1 Function Licensing

2N TELEKOMUNIKACE a.s., www.2n.cz 12/211
– factory value
– licensed function to be purchased additionally
– unavailable
*) The service availability depends on the mobile provider's network configuration.
**) The scrambled keypad function is only available for 2N Access Unit 2.0.

2N TELEKOMUNIKACE a.s., www.2n.cz 13/211
3.1 Function Licensing
Why are some features licensed?
Because we did not want every single customer who purchases our intercom, to pay
for all the advanced features we offer. We believe that most applications can do with
basic level, so the users do not need to pay for features they do not use.
Which features are licensed and what license types are there?
Some intercom functions are unavailable until a valid license key is entered 2N IP
(refer to the License subsection). The following types of licenses are available:
Enhanced Audio (Part No. 9137905, Axis Part No. 01376-001)
Enhanced Video (Part No. 9137906, Axis Part No. 01377-001)
Enhanced Integration (Part No. 9137907, Axis Part No. 01378-001)
Enhanced Security (Part No. 9137908, Axis Part No. 01379-001)
Gold (Part No. 9137909, Axis Part No. 01380-001)
InformaCast (Part No. 9137910, Axis Part No. 01381-001)
NFC (Part No. 9137915, Axis Part No. 01382-001)
The InformaCast license allows the SingleWire InformaCast protocol to be used.
Info
Codec G.729 can be used without a license key in SW versions 2.25 and
higher.
The table below includes the functions that need to be activated by the license keys
corresponding to the above mentioned licenses. The licenses can be combined
arbitrarily.

2N TELEKOMUNIKACE a.s., www.2n.cz 14/211
Property
/License
Enhanced
Audio
Enhanced
Video
Enhanced
Integration
Enhanced
Security
NFC InformaCast Gold
(Profi)
User sounds •      •
Automatic
audio test
•      •
Noise
detection
•      •
Audio/video
streaming
(RTSP Server)
 •     •
External IP
camera
support
 •     •
ONVIF
support
 •     •
PTZ function
support
 •     •
Motion
detection
support
 •     •
Extended
switch setting
options


•



•

2N TELEKOMUNIKACE a.s., www.2n.cz 15/211
Property
/License
Enhanced
Audio
Enhanced
Video
Enhanced
Integration
Enhanced
Security
NFC InformaCast Gold
(Profi)
HTTP API (see
note below)
  •    •
Automation
functions
  •    •
E-mail sending
(SMTP Client)
  •    •
Automatic
update (TFTP
/HTTP Client)
  •    •
FTP client   •    •
SNMP client   •    •
TR-069   •    •
802.1x support    •   •
SIPS (TLS)
support
   •   •
SRTP support    •   •
Silent Alarm



•


•

2N TELEKOMUNIKACE a.s., www.2n.cz 16/211
Property
/License
Enhanced
Audio
Enhanced
Video
Enhanced
Integration
Enhanced
Security
NFC InformaCast Gold
(Profi)
Limit
unsuccessful
access
attempts
   •   •
Switch
Blocking
   •   
Scrambled
keypad
   •   
NFC support     •  •
InformaCast
support
     • 
Anti-passback    •   
Genetec
Synergis
  •    
What other products follow this license scheme?
2N IP intercoms, 2N SIP Audio Converter, 2N SIP Speaker
® ® and 2N SIP Speaker Horn ®
, which already come with preloaded Gold license, so the only possible upgrades is
InformaCast.
2N Access Unit
®, which already comes with preloaded Security and Integration
licenses, so the only upgrade is NFC license. Other licenses are not applicable to 2N
®
. Please note that the NFC license has a different ordering number for Access Unit 2N
®
: 916012.Access Unit

2N TELEKOMUNIKACE a.s., www.2n.cz 17/211
Note
Full function is available with the Gold or Enhanced HTTP API
Integration license only. Only Camera API and Switch API are available
without this license.
Note
Extended switch setting options – quick dial button switch activation,
switch time profile.
How do I get the license?
Licenses are generated by 2N according to the particular serial number. After you
decide which license you want, you need to get the serial number of your unit and
contact your distributor for the license key.
The license itself comes as a key, alphanumeric string, so it can be easily sent via email
and copied and pasted into the intercom.
Licenses are not limited in time. Once you have a license, you have it for good.
In order to activate the license, you need to log in to the intercom web interface and
paste the license key into the System / License field. When you click Save, the
licensed features are immediately activated.
Licenses can be downloaded automatically in the System / License menu.
Tip
FAQ: Lisense for 2N IP/LTE intercoms – How to get it
Can I have a demo lisence?
Yes, there is an option for an 800-hour trial Gold license period during which you can
try the licensed features. By default, this demo is disabled - enable it via the web
interface of the particular intercom in the System / License menu. There is a
countdown timer showing the remaining time after which all the licensed features will
be disabled again.

2N TELEKOMUNIKACE a.s., www.2n.cz 18/211
4. Signalling of Operational
Statuses
2N LTE generates sounds to signal switching and changes of operational intercom
statuses. Each status change is assigned a different type of tone. See the table below
for the list of signals.
Note
Signalling of some of the above mentioned statuses can be modified;
refer to the User Sounds subsection.
Tone Meaning
User activated
This tone signals entering of the user activation code. The activation code is
used for user (user's position) activation. Refer to the Users subsection for
the activation code settings.
User deactivated
This tone signals entering of the user deactivation code. The deactivation
code is used for user (user's position) deactivation. A deactivated user may
not be called but the call can, if necessary, be forwarded to a deputy if
defined. Refer to the Users subsection for the deactivation code settings.
Profile activated
This tone signals profile activation. This function helps enable alerting of a
user group in an office, for example. Refer to the Profile subsection for the
activation code settings.

2N TELEKOMUNIKACE a.s., www.2n.cz 19/211
Tone Meaning
Profile deactivated
This tone signals profile deactivation. This function helps, for example,
disable alerting of a user group in an office and routing calls either to a pre-
defined phone number (porter's lodge, e.g.) or user mobile phones. Refer to
the Profile subsection for the deactivation code settings.
Call prolongation confirmation signalling
Calls are time-limited in for security reasons (protection 2N LTE intercoms
against blocking). Refer to the Miscellaneous subsection for details.
Internal application launched
The internal application is launched upon power up or 2N LTE intercom
restart. A successful launch is signalled by this tone combination.
Connected to data network, IP address received
2N LTE logs in upon the internal application launch. A successful intercom
network login is signalled by this tone combination.
Disconnected from network, IP address lost
This tone signals data network disconnection from . 2N LTE intercom
Disconnection is signalled by this tone combination.
Invalid telephone number or invalid switch activation code
2N LTE allows the user to dial an extension number directly using intercom
the keypad or enter the door unlocking code. An invalid code is signalled by
this tone sequence.
Default reset of network parameters
Upon power up, a 30 s timeout is set for the default reset code entering.
Refer to the Device Configuration subsection in the 2N LTE intercom
Installation Manual for details.

2N TELEKOMUNIKACE a.s., www.2n.cz 20/211
Tone Meaning
Call end signalling
2N LTE enables the user to set a call end timeout to avoid call intercom
blocking. Press a key on your VoIP phone to extend the call time during this
timeout.
Connected VoIP phone
This short tone signals successful connection between a VoIP phone and 2N
.LTE intercom