Axis 282 User manual

 High quality, de-interlaced video at
30/25 frames per second
 Simultaneous Motion JPEG and MPEG-4
streams in resolutions up to 768x576
 Video motion detection and pre/post-alarm
buffer
 Support for PTZ and dome cameras
 HTTPS encryption for network security
 Integrated two-way audio support*
*AXIS 282A
AXIS 282/AXIS 282A
Bare Board Video Servers
AXIS 282/AXIS 282A Bare Board Video Servers from the market
leader in network video, are designed to migrate your analog
investments into high-performance IP solutions, ideal for
surveillance and remote monitoring.
AXIS 282/AXIS 282A Bare Board Video Servers accommodate
one analog video stream and is ideal to be built-in as an
integrated part of a product or system.
System integration and network utilization are optimized with
sophisticated functions such as built-in motion detection,
SNMP and simultaneous Motion JPEG and MPEG-4 streams.
Powerful event management tools include image upload, alarm
notification and I/O control. Pan/tilt/zoom control is done over
the serial port, enabling PTZ and dome camera handling over
the network.
A complete set of security features, including multiple user
access levels, HTTPS encryption and IP address filtering, ensure
secure video handling and configuration.
AXIS 282A Bare Board Video Servers provide one audio stream
in each direction, enabling users to not only see, but also
listen in on an area and communicate requests or orders. In
addition, the AXIS 282/AXIS 282A offer a de-interlace filter
that improves image quality in the highest resolution (4CIF).
This feature eliminates the motion blur problems caused by the
analog PAL/NTSC video signal.
Small footprint unit for
flexible integration

©2005, Axis Communications AB. The Axis logo is a registered trademark of Axis Communications AB. All other company names and products
are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice.
25744/EN/R1/0510
www.axis.com
AXIS 282/AXIS 282A Bare Board Video Servers
Specifications
Models AXIS 282
AXIS 282A: two-way audio
Video compression Motion JPEG
MPEG-4 Part 2 (ISO/IEC 14496-2), Profiles: ASP and SP
Resolutions Resolutions 4CIF, 2CIFExp, 2CIF, CIF, QCIF
max 704x480 (NTSC) 768x576 (PAL)
min 160x120 (NTSC) 176x144 (PAL)
Frame rate
(NTSC/PAL)
Motion JPEG: Up to 30/25 fps at 4CIF
MPEG-4: Up to 30/25 fps at 2CIF
Up to 20/17 fps at 4CIF
Video streaming Simultaneous Motion JPEG and MPEG-4
Controllable frame rate and bandwidth
Constant and variable bit rate (MPEG-4)
Image settings Compression levels: 11 (Motion JPEG) / 23 (MPEG-4)
Rotation: 90º, 180º, 270º
Aspect ratio correction
Color: color, black & white
Overlay capabilities: time, date, text, image or privacy mask
De-interlace filter
Audio
(AXIS 282A)
G.711 PCM 64kbit/s, G.726 ADPCM 32 or 24 kbit/s, full
duplex, half duplex, simplex or audio off
Security Multiple user access levels with password protection,
IP address filtering and HTTPS encryption
Alarm and event
management
Events triggered by built-in motion detection, external
inputs or according to a schedule
Image upload over FTP, email and HTTP
Notification over TCP, email, HTTP and external outputs
Pre- and post alarm buffer of 9 MB (approx. 4 min of CIF
resolution video at 4 frames per second)
Pan/Tilt/Zoom A wide range of analog PTZ dome cameras are supported,
free drivers available at www.axis.com
20 presets, Guard tour, PTZ control queue
Connectors 34-pin header
1 analog composite or Y/C video input (NTSC/
PAL autosensing )
RS-485 or RS-232 port
1 alarm input, 1 alarm output
power connection (input and output)
LED outputs
Audio input (282A): Microphone (54 mVpp) or Line in
(8.0 Vpp), mono
Audio output (282A): Line out (2.6 Vpp), mono
Terminal block:
1 alarm input, 1 alarm output
alternative power connection
Ethernet 10BaseT/100BaseTX, RJ-45
Processors and
memory
CPU: ETRAX 100LX 32bit
Video processing and compression: ARTPEC-2
RAM: 32 MB
Flash: 8 MB
Battery backed up real-time clock
Power 8 - 20 V DC, max 8 W
Operating conditions 5 - 50 ºC (41 - 122 ºF)
Humidity 20 - 80% RH (non-condensing)
Installation,
management and
maintenance
User’s manual and installation tool available at
www.axis.com
Web-based configuration
Configuration backup and restore
Firmware upgrades over HTTP or FTP, firmware available at
www.axis.com
Video access from
Web browser
Camera live view, sequence tour capability for up to 20
PTZ presets or other Axis video sources, customizable
HTML pages
Minimum
Web browsing
requirements
Pentium III CPU 500 MHz or higher, or equivalent AMD
128 MB RAM
AGP graphic card, Direct Draw, 32 MB RAM
Windows XP, 2000, NT4.0*, ME* or 98*, DirectX 9.0 or later
Internet Explorer 5.x or later
For other operating systems and browsers see
www.axis.com/techsup
*Motion JPEG only
System integration
support
Powerful API for software integration available at
www.axis.com, including HTTP API, AXIS Media Control SDK,
event trigger data in video stream, embedded scripting and
access to serial port peripherals over HTTP/TCP. Watchdog
secures continuous operation, can be monitored by other
systems via event notification.
Embedded operating system: Linux 2.4
Supported protocols HTTP, HTTPS, SSL/TLS*, TCP, SNMPv1/v2cv/v3 (MIB-II),
RTSP, RTP, UDP, IGMP, RTCP, SMTP, FTP, DHCP, UPnP, ARP,
DNS, DynDNS, SOCKS. More information on protocol usage
available at www.axis.com
*This product includes software developed by the Open SSL Project for
use in the Open SSL Toolkit.
Applications
(not included)
AXIS Camera Station - Surveillance application for viewing,
recording and archiving up to 25 cameras
AXIS Camera Management – Efficient installation and
management tool for Axis network video products
AXIS Camera Explorer – Basic software for viewing and
manual recording
See www.axis.com/partner/adp_partners.htm
for more software applications via partners
Included Accessories MPEG-4 licenses (1 encoder, 1 decoder), MPEG-4 decoder
(Windows)
Accessories
(not included)
AXIS 292 Network Video Decoder
AXIS MPEG-4 Decoder 10 user license pack
Approvals AXIS 282/AXIS 282A is delivered as a component for
the sole purpose of being integrated into a product or
system. The foregoing implies an obligation on behalf of
the integrator to obtain any approvals from authorities or
governmental bodies that may be required for the lawful
use of the finished product or system, which includes the
AXIS 282/AXIS 282A as a component.
Resale and use of the AXIS 282/AXIS 282A on a stand-
alone basis is not allowed.
Dimensions (HxWxD)
and weight
19 x 79 x 82 mm (3/4” x 31/8” x 31/4”)
60 g (21/8 oz)