– 3 –
SAFETY INSTRUCTIONS
nDo not turn on any function which may distract you while driving the vehicle.
Functions requiring sustained attention must only be used when the vehicle is at a
complete standstill. Make sure to always stop your vehicle in a safe place before
operating these functions. There is a risk of causing an accident.
nKeep the volume at a low level to be able to hear exterior noises while driving
the vehicle. There is a risk of causing an accident.
nDo not open the amplier or undertake any modication of the product. There
is a risk of accident, re or electric shock.
nOnly use this amplier with 12V mobile applications. Any other use other than
the use for which this product has been designed may lead to re, electric shock or
injury.
nUse fuses of the correct amperage. There is a risk of re or electrocution.
nDo not obstruct radiators and/or vents. Internal overheating may occur and cause
a re.
nEnsure all connections are properly made. Check the section of cable and the
type of cable if it does not correspond with the use. There is a risk of re, injury and/
or damage to the product.
nDo not use nuts or fasteners part of the steering or braking systems for ground
connection. The fasteners and nuts used for the brake and steering systems (or any
other security system) as well as various tanks must never be used for grounding.
Use of these parts as ground may deactivate the vehicle’s control system and cause
a re or other technical problem.
nKeep all small objects which could be swallowed, such as the fasteners and
screws, out of the reach of children. Swallowing such objects may cause serious
injuries. In the event of swallowing any of these objects, immediately seek medical
advice.
nBefore starting the installation, disconnect the negative terminal of the battery
to avoid any risk of injury, re or damage to the equipment.
