Aztech DSL906 1DA Series Product information sheet

ADSL Ethernet
Bridge/Router Series
Easy Start
Version 1.0

2
Safety Guidelines
Adhere to the following safety guidelines when using your unit to reduce the risk of fire,
electric shock and injury.
Understand all instructions in the manual. Follow all instruction labels found on the
unit.
Except for the power adapter supplied, the unit should not be connected to other
adapters/power supplies.
Never spill liquid of any kind on the unit.
Do not place the unit on an unstable stand or table. The unit may drop and become
damaged.
Do not expose the unit to direct sunlight.
Do not put any hot devices close to the unit as it may degrade or cause damage to
it.
Do not put any heavy object on top of the unit
Do not use liquid cleaners or aerosol cleaners. Use a soft, dry cloth for cleaning.
!
!
!
!
!
!
!
!
1. Product warranty does not apply to damage caused by lightning, power surges or wrong
voltage usage.
2. This product is for use only in UL Listed computers.

3
Easy StartEasy Start
Easy StartEasy Start
Easy Start
Introduction
Thank you on your purchase of the ADSL Ethernet Router !
The ADSL Ethernet Router can be connected to any computer with an Ethernet card or to
an Ethernet Hub / Switch. It makes use of your existing phone line for Internet surfing and
at the same time allows you to use your phone.
It is important that you read this manual on how to setup your Router.
You should have an Ethernet Card already installed in your system.
Minimum System Requirements
• Pentium®MMX 233MHz (or above) with Ethernet card (installed with TCP/IP Protocol)
• A CD-ROM Drive
• Operating Systems: Windows® 95, Windows® 98, Windows® 98 Second Edition,
Windows® Me, Windows® XP, Windows NT® 4.0 and Windows® 2000

4
Easy StartEasy Start
Easy StartEasy Start
Easy Start
ll
ll
lADSL Ethernet Router
oo
oo
oTelephone cable (RJ-11) 1
mm
mm
mInstallation CD
1 If your package does not come with a Micro-Filter, it implies that the model of your Router does
not require an external Micro-Filter as it is already in-built in your Router.
qq
qq
qMicro-Filter (optional) 2
pp
pp
pCAT-5 UTP Ethernet
cable (RJ-45)
nn
nn
nADSL Ethernet Router
Series Easy Start
Router Package
For any missing items, please contact your dealer immediately.
(graphic shown is only
an example)
l
m
n
ADSL Router Overview
Front Indicators
lLAN
Lights up when the Ethernet link between the ADSL
Router and your Ethernet Card Port is established.
Flickers when the Ethernet is transmitting/receiving
data.
mDSL
Lights up when the ADSL connection is established.
Flickers at fast interval when the ADSL is transmitting/
receiving data.
Flickers at a slower interval when trying to establish a
connection.
nPOWER
Lights up when the ADSL Router is powered up via the
Power adapter.

5
Easy StartEasy Start
Easy StartEasy Start
Easy Start
Back Panel
lLINE
Telephone jack (RJ-11) to connect to your Telephone
Wall Socket (ADSL line).
mPHONE
Telephone jack (RJ-11) to connect to your Telephone Set
via a Micro-Filter.
nRESET
To reset your ADSL Router to factory default settings.
(All customised settings that you have saved will be
lost!)
Please refer to the below footer3on how to activate the
reset function.
oETHERNET
10 Base-T Ethernet jack (RJ-45) to connect to your
Ethernet card or Ethernet Hub/Switch.
pDC IN
To connect to the Power Outlet via the Power Adapter
that comes with your package.
2To activate the reset function:
- Ensure that your ADSL Router is powered on.
- Use a pencil tip or a paper clip to depress the reset button. For about 5 seconds, release the
reset button. The factory default settings are now restored. The default IP address is 192.168.1.1
o
p
l
m
n

6
Easy StartEasy Start
Easy StartEasy Start
Easy Start
Step 1: Connecting Your Router
Power off your computer or/and any connected devices before connecting
your Router !
Step 1.1 Connecting to the Ethernet
Back view of computer
CAT-5 UTP Ethernet cable
Ethernet Card
Ethernet Jack
Back view of Router
Step 1.2 Connecting to the ADSL Line
Telephone extension cable
Telephone Wall
Socket
Back view of Router

7
Easy StartEasy Start
Easy StartEasy Start
Easy Start
Step 1.4 Connecting to The Mains
Power off your Power Adapter when the unit is not in use.
Different countries are bundled with different types of power adapter. The following
illustration is only a representative.
Step 1.3 Connecting to a Telephone Set (Optional)
The connection of the Telephone Set to your Router is optional.
Phone cable
Telephone Set
Micro-Filter (optional) 2
2 If your package does not come with a Micro-Filter, it implies that the model of your Router does
not require an external Micro-Filter as it is already in-built in your Router.
Back view of Router
Power adaptor
The Mains
Back view of Router

8
Easy StartEasy Start
Easy StartEasy Start
Easy Start
Step 3: Configuring Your Ethernet Adapter
If you do not see your TCP/IP networking protocol, refer to the documentation
that comes with your Ethernet card and re-install the driver.
For Windows® 95 / Windows® 98 / Windows® Me
i. From your Windows desktop, right-click on the Network Neighborhood icon. Select
Properties.
ii. From the Configuration tab, select TCP/IP->xxx where xxx refer to your Ethernet
card model that is connected to your Router.
Click Properties.

9
Easy StartEasy Start
Easy StartEasy Start
Easy Start
iii. Select the IP Address tab. Click the option Obtain an IP address automatically.
Click OK. When prompted to restart, click Yes.
For Windows® XP
(Instructions are based on default Start menu)
i. From your Windows desktop, click Start > All Programs > Accessories >
Communications > Network Connections.
ii. Right-click on the Local Area Connection icon that reflects the model of your
Ethernet Card that is connected to your Router and click Properties.
(This is important especially if you have more than one Local Area Connection
icons displayed)
iii. Select Internet Protocol (TCP/IP) and click Properties.

10
Easy StartEasy Start
Easy StartEasy Start
Easy Start
iv. Select the option Obtain an IP address automatically and click OK.
v. Click OK again to close.

11
Easy StartEasy Start
Easy StartEasy Start
Easy Start
For Windows® 2000
i. From your Windows desktop, right-click on the icon My Network Places. Select
Properties.
ii. At the Network and Dial-up Connections window, right-click on the Local Area
Connection icon and select Properties.
iii. Ensure that the field Connect Using indicates the model of your Ethernet Card
that is connected to your Router.
(This is important especially if you have more than one Local Area Connection
icons displayed at the Network and Dial-up Connections window.) If not, right-
click another Local Area Connection icon and check. Select Internet Protocol
(TCP/IP) and click Properties.

12
Easy StartEasy Start
Easy StartEasy Start
Easy Start
(This example uses 3Com EtherLink III Ethernet Card as an example)
iv. Select the option Obtain an IP address automatically. Click OK.
v. Click OK again to close.

13
Easy StartEasy Start
Easy StartEasy Start
Easy Start
Step 4: Setting up your Router Modem for
Internet Connection
i. Power on both your Router and computer.
ii. Place the Installation CD into your CD-ROM Drive. The DSL Router Commander
software would run automatically.(If the software doesn't run automatically, please
navigate to the Installation CD and double-click on DSLCOM.EXE)
iii. You will be prompted for your log in password. Enter the password as password
and click OK.
iv. Click on the Line Configuration tab. By default, the settings are as shown below.
Modify the information as per your Service Provider specification.

14
Easy StartEasy Start
Easy StartEasy Start
Easy Start
v. Click Apply for changes to take effect. Upon configuration successful, you will see
a dialog box, 'Configuration Successful' prompted. Click OK.
vi. Click on DHCP tab. Select or enter the following information :
vii. Click Apply for changes to take effect. Upon configuration successful, you will see
a dialog box, 'Configuration Successful' prompted. Click OK followed by Close to
save the configurations.
For Configuring PPP Unnumbered(Optional)
i. Click on Start > Run. Under Open field, enter command and press OK.
ii. The MS-DOS box would appear.
iii. Type in telnet 192.168.1.1 and press Enter.
iv. When prompted for password, key in password. Please take note that the letters
would not appear but just continue typing.

15
Easy StartEasy Start
Easy StartEasy Start
Easy Start
© Copyright March 2003. All Rights Reserved.
P/N: 040-5K1514-111 (Ref:9009000)
v. When logged in to the router, please enter the following commands :
Assuming 203.125.64.162(Please change accordingly) is the WAN IP address
assigned by the Service Provider.
ip alias lan 203.125.64.162
ip subnet add lan.alias . 203.125.64.162 ff:ff:ff:0
ip route add default 0.0.0.0 ppp_device 0:0:0:0
ppp 1 unnumbered enable
ppp 1 lanname lan
ppp 1 disable
ppp 1 enable
config save
@close
(An example is shown here)
vi. Please procced to surf the internet.