Babybee ROVER User manual
Stroller Manual
IMPORTANT! Keep For Future Reference
babybeeprams.com.au
Before we start, there’s a few important things you
need to be aware of:
Return Policy
If you decide that the ROVER is not
Free Return Policy when returned in
original condition and packaging (with
no signs of usage). Please be mindful
of this when unboxing and setting up.
Refer to our website for full terms
and conditions.
Enjoy the ride, from all of us at
The safety of your family is our number one priority. Please take
the time to carefully read this manual and all warning notices on
before getting started. Incorrect assembly or use can
result in serious injury or even death.
WARNING
To prevent injury from choking, carefully remove and immediately
move out of reach all plastic packaging. Never leave your child
unattended with the pram or packaging.
Support
If at any stage you require assistance
with set up or use, please refer to
our 'After Sales Support' page on our
videos and FAQ’s. Or feel free to
email us anytime at:
hello@babybeeprams.com.au
Welcome aboard and
thanks for choosing
Babybee.
What’s in the box
Please check that you have all the correct parts
before getting started.
Seat & harness covers
Belly bar
Brake bar
Canopy
Seat liner
Handlebar bag
Rain cover (compatible
with seat & bassinet)
UV/Mosquito /Sleep Cover
User manual
Contents
What’s in the box checklist
Setting up your frame
Setting up your seat & canopy
Using your ROVER
Rear brake
Front swivel wheels
Seat recline
Adjusting the footrest
Safety harness
Canopy
Adjusting the handlebar
Folding the Stroller
Free accessories
Tips for maintaining your pram
Cleaning
Warranty
Safety warnings
Setting up your frame
To release the frame
from the folded position,
press the black button
on the right frame release
lever, and pull both
release levers back
towards the handle.
To open, lift up and swing
the lower section into
place ensuring you hear
it “click” into place.
Attach the brake bar
to the rear of the frame.
Push until you see the
silver locking pins click
into place.
2
1To attach the rear wheels
push each wheel pin into
the sides of the brake bar
until you hear a “click”. Give
them a tug to ensure they
are attached securely.
Next, insert each front
wheel pin into the centre
of the socket ensuring you
hear them “click” in. Give
ensure they are secure.
Your frame should
now be set up.
4
5
click!
click!
click!
click!
Setting up your seat & canopy
To recline the seat, lift the
seat recline latch located
at the canopy end of the
frame and tilt the seat
forward or back.
Note: The seat can be
faced in the forward or
rear facing position.
• Do not allow your child to climb unassisted into the stroller.
Line up the seat
connectors with the frame
and press downwards.
Listen for the ‘click’ and
ensure it is securely
locked in place.
adjusting your harness.
click!
1
2
The harness can form loops which may cause a strangulation hazard.
TIP:Your canopy visor may need a little TLC after shipping. To get it
looking nice and new again simply apply heat from a clothes steamer or
hair dryer to remove any wrinkles (just be careful not to scorch the fabric).
This is not covered under warranty.
secure it to the frame with the
zip starting from the left side
(when facing the seat).
Finally, insert the belly bar into
the belly bar sockets on the seat
tug to ensure its secure.
Note: To remove from one side
or both, press the button on the
side you want to release, and
pull the belly bar out.
click!
Next attach the plastic
canopy connectors onto the
sides of the frame (TIP: attach
from top to bottom). You’ll notice
a round guide on each side, the
connectors should attach
over these guides.
click!
Using your ROVER
Correct use:
Any vehicle with moving parts needs to be used and treated with care and
given regular maintenance to remain safe and in good condition. Please be gentle,
ROVER looking and feeling newer
for longer!
Front swivel wheels:
When travelling fast along straight surfaces or across uneven terrain, the front
wheels may spin or cause what's commonly known as as “wheel shudder”.
Rear brake:
When stopping, use the brake at all times by pressing down on the bottom of
To lock the front swivel wheels
into place, press down on the
wheel lock buttons (located on
the top of the wheel sockets).
press the buttons again.
To remove the front wheels,
press the button on the side
of the wheel socket and pull
the wheel down.
Rear wheels:
To remove the rear wheels, press the
button located on the brake bar and
Basket:
The ROVER basket has been tested
with more weight may cause the
basket to break.
Adjusting the footrest:
Press both footrest buttons
simultaneously and adjust the footrest
to the desired position.
Reclining the seat:
Fully lift the seat recline latch (located
at the top of the canopy) and recline the
seat to the desired position.
Safety Harness:
Always engage the brake before placing your child in the stroller.
Using your ROVER
Always use the harness when your
child is in the stroller. Always adjust
the harness appropriately for your
child’s size.
Adjust the length of each strap
To release press the button
in the middle of the buckle.
Always give the harness a
tug to ensure it’s secure.
Depending on your child’s
height, thread the shoulder
strap through the appropriate
slot on the seat.
Ensure it is thread through
the corresponding slot of the
seat liner.
Adjust the strap length using
the buckle as required.
straps into the central buckle.
To secure the harness:
To adjust the height of the
harness straps:
Having trouble?
Visit our website for a video tutorial
on how to adjust the harness.
Canopy:
Adjust the canopy as needed to protect your child from the sun and wind. For
maximum protection, use the zip to extend the canopy to its maximum length.
Adjusting The Handlebar:
Push the button in the middle of the handlebar and pull or push to
your desired height.
Folding the Stroller
Recommended as the safest option:
Before folding, ensure that the front wheels are unlocked.
Remove the stroller seat by lifting the release levers on either side.
Push the black button on the frame release lever and then pull both
black release levers up the frame.
Push down on the handlebar to close it.
Then you can lift the frame up using the carry bar and the front
wheels will close inwards.
The frame has an automatic lock that ensures that it stays closed
while you are carrying or storing the pram. To ensure that it has
engaged, always push the front section of the frame closed as
far as you can and give it a pull to ensure you cannot release it.
• Always take care when folding the frame and lift the frame from the carry bar.
• Always remove the car capsule, bassinet or seat prior to folding and carry the
frame and seat/bassinet separately. This is the safest carry method for your back.
• Do not carry bags from the handlebar other than the one provided by Babybee.
• Do not use parts or accessories that are not approved for use with the Babybee
ROVER range. Doing so may be unsafe and may also void your warranty.
(e.g. toddler boards, bag hooks, rain covers, etc).
• Never leave covers on or over the pram indoors, in very hot weather or near a heat
source. Always supervise and monitor your child regularly whilst the pram is covered.
Free Accessories
Rain Cover (compatible
with seat & bassinet)
Pull the rain cover and elastic over the top of the
canopy and then over the end of the bassinet. The
the wind. Please ensure the air vents are located on
either side so that air can pass through.
Note: The cover will be looser on the bassinet
due to its shorter frame and canopy.
UV / Mosquito / Sleep Cover
Fully extend the canopy. Attach the press studs onto
the sides of the canopy connectors, then hook the
cover over the base of the seat and top of the canopy.
Note: Compatible with seat only, covering your
bassinet with any fabric could result in overheating
or reduced oxygen.
Seat Liner
Attach the seat liner by threading the harness straps
from the seat through the corresponding slot.
Handlebar bag
Secure the straps with the press studs over the
handlebar. Be careful carrying liquids in the handlebar
bag. Hot liquids may burn you or your child.
Tips for maintaining
your pram.
safety of your pram. To keep your ROVER in good
working condition and ensure that it lasts as long as
possible will require regular maintenance and you will
need to service your pram every 6 months.
Regular maintenance
should include:
Inspecting the locking devices, levers,
joints, buttons, brakes, wheels, safety
secure, moving freely and in fully
working order.
If any parts of the pram have become
cause. Then try a light application of a
sprayable silicone lubricant, ensuring
that it penetrates between the
components. (Note: Only use lubricant
labeled ‘Silicone Lubricant’, other
lubricants can deteriorate the plastic
parts of your pram and also attract dirt
and dust e.g. DO NOT use standard
SPECIALIST Silicon Lubricant or SCA
Silicone Spray available from
Supercheap Auto, Bunnings and
most hardware stores.
Preventing rust
& mold
After exposure to wet or damp
conditions (especially trips to the beach,
snow or in the rain), leave the pram
fully open in a warm, well ventilated
environment to prevent rust and mold.
You may need to dry with a soft, lint
free cloth. Left damp it will encourage
mildew, mold or rust to form, damaging
the pram.
Correct Use
The ROVER has been designed for
urban living and weekend adventures
which means it’s ideal for walking on
sealed footpaths, in shopping centres,
cafes and down at your local park. Use
of the ROVER
terrain will clearly place more stress
on the frame and wheels and cause it
to wear out faster. For this reason we
recommend “weekend adventures” and
Ensure children are not present when applying silicon lubricant or allowing it to dry.
Always spray outside or in a well ventilated area. Ensure you use minimal product and
wipe away excess solution before use.
POISONOUS, TOXIC SUBSTANCE. USE WITH CARE.
Storage
• Do not leave the pram in direct
sunlight for prolonged periods of
time to avoid colour fade.
• Do not leave in your car on days
of extreme heat or near any heat
• Do not store the stroller with
heavy items on top of it.
ventilated and safe place.
Spare Parts
• The brakes and wheels are
subject to normal wear and should
be replaced if necessary.
• Spare parts are available for
purchase on the Spare Parts
page of our website:
babybeeprams.com.au
If the part you require is not listed
please email us for a quote.
Cleaning Instructions
For a comprehensive deep cleaning
guide (we recommended you do this
website.
• Use a soft brush to brush down
the pram and remove any dirt
or dust making sure you get into
all the nooks and crannies (i.e inside
the wheel hubs, inside the joints
from all folding parts etc). You
could also give it a good vacuum.
with steel wool.
• All plastic, fabric and metal parts
of the pram may be sponged clean
with a soft cloth in warm water and
a mild detergent.
• Wipe dry with a soft towel or cloth
and allow all parts to dry thoroughly
before using.
• The seat liner and bassinet
mattress liner are machine washable
on a delicate setting (maximum
newer for longer.
Do not
. Do not immerse the seat or canopy
in water, sponge clean only.
. Do not clean with abrasive materials
or using ammonia, bleach, solvents,
. Do not press or iron.
. Do not rub or wring fabric.
. Do not tumble dry.
. Do not dry clean.
Failing to adhere to these maintenance
and cleaning instructions could damage
void your warranty.
• Do not clean your pram with
children around.
• Do not dismantle or alter any
part of the folding mechanisms,
frame, brake axel or wheels for
cleaning or any other reason.
• Do not use if any part is broken,
torn or missing. Replacement
parts are available from our
website or by contacting us.
Warranty Information
year defects warranty to cover
against faults in materials and
workmanship when your pram is
used under normal conditions,
according to our user manuals and
are in addition to other rights and
remedies under the law in relation to
consumer goods: Our goods come with
guarantees that cannot be excluded
under the Australian Consumer Law.
You are entitled to a replacement
or refund for a major failure and for
compensation for any other reasonably
foreseeable loss or damage. You are
also entitled to have the goods repaired
or replaced if the goods fail to be of
acceptable quality and the failure does
not amount to a major failure.
The warranty period starts from the
date that your pram is dispatched
from our warehouse and is valid in
Australia only.
To make a claim email us at:
a detailed description, video and/or
photos of the defect and a photo of the
batch number, which is located inside
the back of your basket. Our warranty
team will then determine the best
way to resolve any defects or faults.
Babybee reserves the right to repair,
exchange or replace the damaged item
with a replacement part. Some parts
may be replaced with newer model
parts as the pram is improved over time.
The warranty is not valid in the
following cases:
• Defects or faults resulting from
improper assembly, care or use
as outlined in our user manual;
• Defects or faults resulting from an
accident, airline or transport damage;
• Normal wear and tear, including
scratches to the frame or colour fading
of the fabrics;
• Damage to handle/belly bar grips or
of normal handling and daily use;
• Corrosion, mold or rust due to
extreme environmental conditions,
including high humidity, salt spray,
snow or due to lack of regular
maintenance.
• Products that are purchased second
hand or from an unauthorised
distributor;
• Using a part or accessory that is not
compatible with the product and/or not
manufactured by Babybee Prams;
• If you or a third party has attempted
to modify or repair the pram without
having received written permission
from Babybee Prams.
• Claims from anyone other than the
original purchaser (i.e. no longer valid
if gifted or sold to another individual)
• Damage resulting from extreme heat
conditions (i.e. leaving in car on hot
days)
• Customer dissatisfaction with the
functionality, colour or design.
Safety Warnings
The Babybee ROVER is designed
and tested to comply with AS/
hazards associated with prams and
strollers which could result in serious
injury or even death:
• The pram or stroller rolling away
from the carers control
• Falls
Please read and follow the bellow
warning notices before using your
stroller:
• To avoid injury or death:
• Always apply the brakes
whenever the pram/
stroller is stationary.
• Do not leave children
unattended.
• Secure the child in the stroller
harness at all times.
• Do not carry extra children or
bags on the pram/stroller.
• Make sure children are clear
of any moving parts if you
adjust the pram/stroller.
• This stroller seats one passenger
old who cannot sit up unaided.
• Do not allow your child to climb
unassisted into the stroller.
Safety Harness
• Please ensure that your child correctly
secured.
• Never leave the harness buckled when
harness can form loops which may
cause a strangulation hazard.
• Maximum weight that can be carried
• Do not use the bassinet once the
child can sit up unaided.
• Not to be used for overnight or
unsupervised sleeping.
Do not recline.
• Do not add additional mattress or
padding inside the bassinet.
• To reduce the risk of SIDS,
paediatricians recommend healthy
infants be placed on their backs
to sleep, unless otherwise advised
by your physician.
Accessories &
replacement parts
• Do not use parts or accessories
that are not approved for use with
the Babybee ROVER range. Doing
so may be unsafe and may also
void your warranty. (e.g. toddler
boards, bag hooks, rain covers etc)
Carrying your stroller
your own and your children’s
• Do not lift or carry the stroller when
occupied by your child.
• Do not lift or carry the stroller when
fully assembled. Only lift and carry
after folding.
• Always remove the car capsule,
bassinet or seat prior to folding
and carry the frame and seat/
bassinet separately.
• Ensure that the automatic frame
lock is engaged before lifting or
carrying the stroller.
• Make sure the stroller and all
parts are secured when being
transported in a vehicle.
Safety Warnings
Continued
General safety
• This is not a toy. Do not allow your
child to climb, stand on or play
with the stroller.
• Do not use the pram in a manner
for which it is not designed.
• Keep children clear of the pram
before making any adjustments.
• Not suitable for running, rollerblading
or skating.
• Remove your child and fold the
stroller/pram when going up or down
stairs or escalators.
• Take your child out of the stroller
when travelling by bus, tram or train.
• Gentle sloping surfaces may be
unstable. On steeper sloping and
uneven surfaces, there is a possibility
that the pram may tip over and you
may need to remove your child.
• Do not use if any part is broken, torn
or missing. Replacement parts are
available from our website or
by contacting us.
• Do not use or leave the pram near
• Never leave rain covers, canopy/
bassinet covers on or over the pram
indoors, in a hot atmosphere or near
a heat source. Always supervise
whilst the pram is covered.
• Always ensure that the frame and
the seat/bassinet/car capsule are
correctly engaged before using the
product.
• Do not overload the pram with
additional children, bags, other items
or accessories.
• Bags and other items must not be
hung from the handle bar as they
may damage the frame or otherwise
cause the pram to become
unbalanced and tip over.
• Do not allow children to stand on the
axle/brake bar between the wheels.
This is unsafe and could damage the
stroller.
Maximum weight limits:
• Maximum weight for a child in the
• Maximum weight for a child in the
• Maximum weight for items in the
basket is 8kg.
• Maximum weight for the seat
• Maximum weight for the handlebar
.
Supervision
• Never leave your child unattended
with the stroller. It should only be
used under adult supervision.
Others using your pram
• If the stroller is being used by
someone unfamiliar with it (such as
grandparents) always explain to
them how the stroller works and
its safety features.
Wrist tether strap
• Always use the wrist tether strap to
stop the pram/stroller rolling away.
WIN
with #babybeeprams
We love nothing more
than seeing our Babybee babes
out and (buzzing) about on
daily adventures.
Tag us in your pics,
on Facebook or Instagram for your
chance to win a prize each month
and be featured on the official
Babybee social media accounts:
@babybeeprams
What now?
Refer to the Bassinet
Manual.
Designer style.
Unbeatable value.
babybeeprams.com.au
Babybee prams babybeeprams
hello@babybeeprams.com.au
ROVER
to change. Please see website for current version.
Table of contents
Other Babybee Stroller manuals
Babybee
Babybee DUO2 User manual
Babybee
Babybee ROVER 3 Bassinet User manual
Babybee
Babybee DUO User manual
Babybee
Babybee DUO3 User manual
Babybee
Babybee MIO User manual
Babybee
Babybee DUO2 User manual
Babybee
Babybee Bassinet User manual
Babybee
Babybee ROVER Bassinet User manual
Babybee
Babybee Comet plus User manual
Babybee
Babybee rover3 User manual
