Ballard Designs Madison Chaise JC022 User manual

Page 1 of 5
PRODUCT NAME: Madison Chaise
ITEM NUMBER: JC022
DIMENSIONS OF ITEM ASSEMBLED: 24 1/2”H x 28”W X 80”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 1/3/2014
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN VIETNAM

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 5
TOOLS NEEDED:
2 Person assembly.
Ltr.
A 2 90mm Allen Screws
Frame (E)
Left Arm (F)
Right Arm (G)
Front Leg (H)
Seat Cushion (I)
B 4 40mm Allen Bolts
C 2 Screw Plugs
D 1 Allen Wrench
Qty. Hardware Included
Ltr.
E 1
F 1
G 1
H 1
I 1
Qty. Components

Page 3 of 5
STEP 1: Place the Frame (E) upside down on a smooth, clean surface. Attach the Front Leg (H) to the
Frame (E) using the 90mm Allen Screws (A). Tighten all Screws (A) with the Allen Wrench (D).
STEP 2:
STEP 2: LEFT ARM (F) STEP 3: RIGHT ARM (G)
Place the Frame (E) on its right side and attach the Left Arm (F) to the Frame (E) using
2 of the 40mm Allen Bolts (B). Tighten all the Bolts (B) with the Allen Wrench (D).
STEP 3: Flip the Frame (E) on its left side and attach the Right Arm (G) to the Frame (E) using
the remaining 40mm Allen Bolts (B). Tighten all the Bolts (B) with the Allen Wrench (D).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(F) (G)
(H)
(E)
(E)
(E)
(F)
(A)
(B)
(B)
(B) (B)

Page 4 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(C)
(H)
(I)
(E)
STEP 4: Turn the Chaise upright and insert the Screw Plugs (C) into the 90mm Screw (A) holes.
Lightly tap them into place.
STEP 5: Place the Seat Cushion (I) on the Chaise. Then tie the Seat Cushion (I) to the Frame (E).

Page 5 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Clean & Care:
Please refer to the care instructions on the hang tag.
STEP 6: Adjust the Chaise back height as desired.