Bally CineVision 103126 User manual

CineVision Game Assembly
CineVision Game Assembly DOC-103500
Assemblies: 103126, 105502, 104217

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Publication Date: February 25, 2011 VERSION .01
Copyright
Copyright 2005 Bally Gaming, Inc. Rights Reserved.
The following are trademarks of Bally Gaming, Inc.:
CineVision
All other product names and trademarks are the intellectual property of their respective owners. This
documentation contains confidential and proprietary information of Bally Gaming, Inc. No portion of
this document may be reproduced or transmitted in any form or by any means, electronic or mechanical,
for any purpose, without the express written permission of Bally Gaming, Inc.
The specifications and information contained in this documentation are subject to change without notice.
All statements, information, illustrations, specifications and recommendations in this documentation are
believed to be accurate butare provided without warranty of any kind, expressed or implied.
In Las Vegas
In the US and Canada
Outside the US
PH: 896-7772
FAX: [phone]
PH: 1-877-GO BALLY
(877-462-2559)
PH: 1-702-896-7772

CineVision Game Assembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page iii of 34
Visit our website at http://www.ballygaming.com

CineVision Game Assembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page iv of 34
Contents
Introduction....................................................................................................................6
About this Guide .....................................................................................................................6
Parts and Assemblies .............................................................................................................6
Recommended Tools & Supplies ............................................................................................ 6
Cabinet Parts Kit............................................................................................................8
Parts and Assemblies .............................................................................................................8
Speakers .............................................................................................................................. 10
Cable Interconnect Brackets .................................................................................................11
Door Switches ...................................................................................................................... 12
Base Shelf ............................................................................................................................ 13
Main Cabinet Door Lock .......................................................................................................13
Catch Bottle and Tubing .......................................................................................................14
Footrest ................................................................................................................................ 14
Processor/Power Supply Assembly ...................................................................................... 15
4-Meter PCB......................................................................................................................... 20
Audio Board Tray & Chassis .................................................................................................20
Deck Bulkhead ..................................................................................................................... 21
26" LCD Touch Screen .........................................................................................................23
Gas Struts............................................................................................................................. 25
Cabinet Base Assembly ..............................................................................................26
Parts and Assemblies ...........................................................................................................26
Lower Door ........................................................................................................................... 26
Lock and Cam ...................................................................................................................... 27
Front Base Panel..................................................................................................................28
Top Box Assembly ......................................................................................................28
Top Box Cabinet ................................................................................................................... 30
Door Switch ........................................................................................................................................ 31
Top Box Door ....................................................................................................................... 32
Lock and Cam.....................................................................................................................................33

CineVision Game Assembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page v of 34

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 6 of 34
Introduction
About this Guide
The purpose of this document is to assist Bally Gaming assembly technicians with a CineVision cabinet
assembly. This document is divided into three sections as follows.
Table 1: Installation
Section
Description
One
Main Cabinet Assembly
Two
Cabinet Base Assembly
Three
Top Box Cabinet Assembly and Installation
Parts and Assemblies
Portions of the CineVisioncabinet are preassembled and installed prior to reaching Bally’s assembly line.
Remaining portions of theassembly require the contents of 103126 (Cabinet Parts Kit), 105502 (Cabinet
Base Assembly), and 104217 (Top Box Parts Kit). The contents of each kit are listed at the beginning of
sections one, two, and three as described in Table 1. See Table 2 for the hardware needed to install the
contents of each parts kit:
Table 2: Required Hardware
Part Number
Description
Quantity
18454
Shoulder Washer
3
NLS-LSPP-M0470-1205
Screw
6
NLS-LSPP-M0350-1206
Screw
4
NLS-M0350-1206
Nut
8
NLS-M0470-1117
Nut
40
Recommended Tools & Supplies
Be sure to have thefollowing tools and supplies available throughout the assembly:

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 7 of 34
Phillips Screwdriver
11/32", 3/8", 5/16"nut drivers
Side Cutters
Cable Ties (p/n E-00647-0005)

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 8 of 34
Cabinet Parts Kit
For this portion of the assembly, you will install the following components (numbered accordinglyin
1. 4"Speakers
2. 6"Speaker
3. Cable Interconnect Brackets
4. Main Cabinet Lock & Cam
5. Door Switches
6. Base Shelf
7. Catch Bottle and Tubing
8. Footrest
9. MPU/Pwr Supply Assembly
10. 4-Meter PCB Assembly
11. Audio Tray & Chassis
12. Deck Bulkhead
13. 26" LCD Touch Screen
14. Gas Struts
Parts and Assemblies
Verify you have the parts and assemblies included in the Cabinet Parts Kit (103126) as listed in Table 3:
Table 3: 103126 Contents
Reference
Part Number
Description
Quantity
Figure 1
104212
20W, 4" Speaker
2
Figure 3
103250
Speaker Grill
1
Figure 3
100673-00001
50W, 6" Speaker
1
Figure 4
101609
Cable Interconnect Bracket (Right)
1
Figure 4
101892
Cable Interconnect Bracket (Left)
1
Figure 8
M-002810170
Lock w/o Cam
1
Figure 8
SDG-20228
1-⅛" x ¾" Cam
1
Figure 6
E-00108-0384
Door Switch
3
Figure 7
104805
Base Shelf
1
Figure 9
104798
Catch Bottle
2
Figure 10
104799
6" Water Diversion Tubing
2
Not Shown
104808
2" Self-Adhesive Hook and Loop Tape
2
Figure 11
103419
Footrest
1

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 9 of 34
Figure 13
103470
Processor/Power Supply Assembly
1
Figure 16
103094
5v/12v Power Supply
1
Figure 16
103107
24v Power Supply
1
Figure 18
44603
MPU Assembly
1
Figure 19
SDG-26460-4
4-Meter PCB
1
Figure 21
SDG-41060
Audio Board Tray
1
Figure 22
SDG-41061
Audio Board Chassis
1
Figure 24
103672
Deck Bulkhead
1
Figure 28
103694
26" LCD Touch Screen
1
Figure 29
103630
Side Grill
2
Figure 30
103575
Side Grill Backing
2
105054
Gas Strut w/o Latch
2
103681
Lower Strut Mount
2
Upper Strut Mount ??????
2

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 10 of 34
Speakers
STEP 1: Use four nuts (NLS-M0470-1117) to install both 4" Speakers (104212) on top of the
upper portion of the cabinet.
a. Be sure the terminals on each speaker point to the center of the cabinet as shown
in Figure 2.
STEP 2: St the Speaker Grill (103205) onto the four studs surrounding the speaker opening on
the inside of the cabinet.
STEP 3: Place the 6" Speaker (100673-00001) onto the grill (see Figure 1).
STEP 4: Secure the speaker and grill to the cabinet using four nuts (NLS-M0470-1117).

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 11 of 34
Figure 1: Speaker Installation
Figure 2: 4" Speaker Orientation
Figure 3: 6'' Speaker Assembly
Cable Interconnect Brackets
STEP 1: Use two nuts (NLS-M0470-1117) to mount the left Cable Interconnect Bracket (101892)
in the designated opening in the upper portion of the cabinet (next to the left speaker).
STEP 2: Use two nuts (NLS-M0470-1117) to mount the right Cable Interconnect Bracket
(101609) in the designatedopening in theupper portion of the cabinet (next to the right
speaker).

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 12 of 34
Figure 4: Cable Interconnect Brackets
Door Switches
STEP 1: Locate each of the three door
switch brackets numbered in
Figure 6.
STEP 2: Insert a Door Switch (E-00108-
0384) into each of the brackets.
Figure 5: Door Switch Brackets
Figure 6: Door Switch

CineVision Game Assembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 13 of 34
Base Shelf
STEP 1: Set the Shelf Base (104805) inside
the base of the cabinet
a. Be sure to set the shelf as
far back into the cabinet
as possible.
STEP 2: Tighten the thumb-bolts to
secure the shelf to the base of the
cabinet.
Figure 7: Installed Base Shelf
Main Cabinet Door Lock
STEP 1: If necessary, disassemble the Lock (M-
00281-0170), and set hardware aside.
STEP 2: Press the lock into the designated hole
underneath the armrest onthe main
cabinet door.
STEP 3: Place the Cam (SDG-20228) onto the
lock from the backside of the panel.
STEP 4: Tighten the cam in place using the
hardware removed in Step 1 (see
Figure 8).
Figure 8: Lock Hardware
Base Shelf

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 14 of 34
Catch Bottle and Tubing
STEP 1: If necessary, cut the Hook and Loop Tape (104808) to create two 2" pieces.
STEP 2: Use one 2" piece to mount a Catch Bottle (104798) in the back of the cabinet base, on the
right and left
STEP 3: If necessary, cut the Water Diversion Tubing (104799) to create two 6" pieces.
STEP 4: Place one end of each 6" tube onto the stand-off located directly above each catch bottle
(magnified in Figure 10).
Figure 9: Catch Bottle Installation
Figure 10: Catch Bottle and Tubing
Footrest
STEP 1: Secure the Footrest (103419) to the
cabinet using three ??? (?????) as
shown in Figure 11.
Figure 11: Footrest
Figure 12: Footrest Installation

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 15 of 34
Processor/Power Supply Assembly
STEP 1: Use four nuts (NLS-M0470-1117) to
mount the processor/power supply
(103470) onto four studs (numbered
in Figure 14) in the lower portion of
the cabinet.
a. Be sure the backplane rests
securely on the bottom of
the cabinet as in Figure 15.
Figure 13: MPU/Power Supply (103470)
Figure 14: 103470 Mount Location
Figure 15: Mounted MPU/Power Supply
Backplane

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 16 of 34

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 17 of 34
STEP 2: Slide the 5v/12v Power Supply (103094) onto the left side of the MPU/power supply
assembly.
STEP 3: Slide the 24v Power Supply (103107) onto the right side of MPU/power supply assembly.
STEP 4: Tighten the thumb-bolts on each power supply to secure in place.
Figure 16: Power Supplies
STEP 5: Slide the MPU (44603) into the MPU/power supplyassembly below the power supplies.
Figure 17: Complete MPU/Power Supply Assembly
5v/12v Power Supply
24v Power Supply
MPU
MPU Cables

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 18 of 34
STEP 6: Notice the MPU cables attached to the left side of the housing Figure 17.
STEP 7: Refer to the following chart and
Figure 18 and connect the
MPU cables accordingly:
Ref (Figure 18)
Cable
1
Touch Screen (E-00664-0710)
2
VGA (E-00664-0708)
3
MPU Power (E-126-184)
4
Audio (Line Out)
Figure 18: MPU Cable Connections
STEP 8: Route the XX portion of the Main Cabinet Harness (104225) along the back, right corner
of the cabinet.
STEP 9: Route the XX portion of the main cabinet harness along the back, left corner of the
cabinet.
1
4
3
2
1
2
3
4

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 19 of 34
S

CineVisionGameAssembly
Technical Publications – Las Vegas, Nevada DOC-103500
Publication Date: February 25, 2011 VERSION .01
Page 20 of 34
4-Meter PCB
STEP 1: Use four screws (LSPP-M0350-1206) to mount the 4-Meter PCB (SDG-26460-4) to the
Figure 19: SDG-26460-4
Figure 20: SDG-26460-4 Mount Location
Audio Board Tray & Chassis
STEP 1: Use four nuts (NLS-M0470-1117) to secure the Audio Chassis (SDG-41061) to the left
side of the cabinet as shown in Figure 22.
Touch Screen Area