Bally Eight Ball Deluxe User manual

GAME No. 0B87
Form No. 0B87-00300

WARNING
THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY
RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS
WARNING: This equipment generates uses and can rad, ate rad,o frequency energy and ,t no. and used m
accordance with the instructions manual may cause interference to radio communications It has been tested
Tcc RuT MC7Py W'd
,he
"T'° raCLASS Acompu,m9device pursuant to SUBPART J of PART IS of
FCC RULES which ^e designed to provide reasonable protection against such interference when operated
macommerical environment Operation of this equipment maresidential area ,s likely tocause interference in
which case the user at his own expense will be required to take whatever measures may be required to correct
ELECTRICAL BULLETIN: FOR ALL APPARATUS POVFRFn rv namai-siam
STANDARDS ASSOCIATION (CSA) STANDARD C22 27} 7WHICH FMPmS^A
SUPPLY CORD TERMINATED WITH APOLARIZED 2^PR0NG ATT^CHM^NT^PLUcf. A
CAUTION: JP P^y^N1ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTI FT
^SSTHE BLADES CAN BE FULLY INSERTED TO PREvInT°BLADE
ATTENTION: P°UR pREVENIF'CHOCS ELECTRIQUES NE PAS UTILISER CETTE
&CJranW
d
Ee
Tc Ro
Eu^eS
r
E
tREES aF0ND
tfsatfty MIDWAY
OUR TOLL FREE numbers for
SERVICE INFORMATION CONCERNING THIS GAME, OR ANY
OTHER BALLY MIDWAY GAME YOU NOW HAVE ON LOCATION
CALL US FOR PROMPT, COURTEOUS
ANSWERS TO VOUR PROBLEMS.
VIDEO —Continental U.S. 1-800-323-7182
PINBALL mm Continental U.S. 1-800-323-3555
(/Satty MIDWAY -r°601 West Belmont Avenue Frank!,nPark Illinois 6013! phone [phone]
‘COPYRIGHT MCMLXXXIV BY BALLY MIDWAY MFG. CO. ALL RIGHTS RESERVED
BELMONT AVE.. FR^UN pIrk IL 6OI 3TPERM'SSI °NRE °UESTS'WRITE: BALLY MIDWAY MFG. CO.. 10601 W.'
Printed in U.S.A.

Installation and General Game Operation Instructions
INDEX
I.
II.
ill.
IV.
V.
VI.
VII.
VIII
IX.
X.
XI.
INSTALLATION
GENERAL GAME OPERATION
BOOKKEEPING FUNCTIONS
FEATURE OPERATION AND SCORING
GAME ADJUSTMENTS
A. PLAYFIELD ADJUSTMENTS
B. BACKBOX ADJUSTMENTS
CREDITS/COIN
MAXIMUM CREDITS
BALLS/GAME
MATCH FEATURE OPTION
CREDIT DISPLAY
HIGH SCORE FEATURE OPTION
HIGH SCORE TO DATE
GAME FEATURE OPTIONS
SOUND OPTION
C. FRONT DOOR GAME ADJUSTMENTS
HIGH SCORE FEATURE
HIGH SCORE TO DATE FEATURE
RECOMMENDED SCORE CARDS
RECOMMENDED SETTINGS
ROUTINE MAINTENANCE ON LOCATION
TROUBLE SHOOTING ON LOCATION ..
.
SERVICE/PARTS
PARTS LIST
PAGE
.1
.2
.3
.4
.5
.5
.5
.5
.6
.6
.6
.6
.6
.6
.7
.7
.8
.8
11
12
13
13
19
20-35

BLOCK DIAGRAM-ELECTRONIC PINBALL GAME
A14:
SQUAWK AND
TALK
MODULE SWITCH
MATRIX
<lNPirr«u

^asaffiasBsssaaag^essggi^gjigB
I
I. INSTALLATION
Assemble the game as follows:
Bolt legs to cabinet. Bolt back box to cabinet. Use flat washers under bolt heads Gentlv feed
cable connectors and ground braid through cable port in back box. Screw arnnnH hrain
braid in back box. Carefully and fully insert connectors on printed circuit assemblies
On all games there are certain items that should be checked after shipment These are visual
inspections which may avoid time consuming service work later. Minor troubles caused hv
abusive handling in shipment are unavoidable. Cable connectors may be loosened switches
(especially tilt switches) may go out of adjustment. Plumb bob tilt switch should aiwavs he
adjusted after game is set on location and leg levelers are adjusted.
Visual inspections before plugging in line cord
:
1.Check that all cable connectors are completely seated on printed circuit assemblies.
2. Check that cables are clear of all moving parts.
3. Check for any wires that may have become disconnected.
!hSheCk ,
SW
!!
Che!j°r'°0Se SOlde,: 0r other forei9nmaterial that may have come loose in
shipment and could cause shorting of contacts.
5Check wires on coils for proper soldering. Cold solder connections may not show uo in
factory inspection, but vibration in shipment may break contact.
6. Check that fuses are firmly seated and making good contact.
7. Check the transformer for any foreign material shorting across wiring lugs.
8. Check wiring of transformer to correspond to location voltage. See figure 1.
Check adjustment of the three (normally open) tilt switches:
1.Panel tilt on bottom of playfield panel
.
2. Plumb bob tilt on left side of cabinet near front door.
3. Ball tilt above plumb bob tilt. Insert the smaller ball (15/16" dia.) into the ball tilt assemblv
Raised
JUS hG braCkGt S°thG ba"WHI r°Hfree t0 C°ntact the switch blade’if front of cabinet fs
TRANSFORMER CONNECTION INSTRUCTIONS
REFER TO POWER SUPPLY SCHEMATIC
IN GAME MANUAL FOR TABLE “A”
115 VAC, 2-8,3-6,7-10
120 VAC, 2-8,4-6.7-1 1
220 VAC. 4-8. 7-9
240 VAC, 4-8.7-11
PART OF POWER-TRANSFORMER MODULE A2, LOCATED IN LOWER CABINET

II. GENERAL GAME OPERATION
Place ball into playfield by outhole.
Coin game. Coin should be rejected. Plug in line cord. Move power ON-OFF master switch at
bottom right front corner of cabinet to ‘ON’ position. The game will play apower-up tune to
announce game-readiness. Drop targets are reset, scores are set to zero, alternating with the
High Score to Date, and the game is ready for play. Coin game. The game should accept the
coin and post credits* for coins accepted (adjustable). Pressing the credit button on the door will
cause the outhole kicker to serve the ball to the shooter alley. The 1st player-up iite is lit A
game-up tune* is played to announce play-readiness. ’'~
One player is posted each additional time the credit button is pressed (one to four can play). The
credits are reduced by one each time the credit button is pressed until the credits are reduced to
zero.
Shooting the ball initiates play.
The game awards all points earned by the player. If spinner is turning and scoring when the ball
hits atarget, the spinner and the target scores are awarded.
When the ball enters the outhole, the bonus score is added to the total score. The player-up
and/or ball in play on the back box is advanced one position. The outhole kicker serves the ball
iO the shooter alley and play is resumed. This continues until each player has played the
allowable number of balls per game (adjustable). At this time the ‘Game Over’ light is lit A
random Match* number appears and the ‘Match’ light is lit. If the number is the same as the last
two digits in aplayer’s score, afree game is awarded.
Extra balls won during the course of the game are played immediately after the player sregular
ball enters the outhole. The player-up and/or ball in play on the back box are not advanced for
extra ball play. Bonus score is added to the player sscore before the game serves the extra ball
for play.
Scoring over 10,000,000 gives “High Score to Date” award.
At the end of the game, aHigh Score to Date is alternately flashed with all 4player scores If the
‘High Score to Date’ is beat, this feature* awards free games.
Tilting the game results in loss of aball. The flippers, thumper-bumpers, etc., go ‘dead.’ Bonus
points are not scored. The purpose of the tilt penalty is to discourage the player from jostling the
machine in an attempt to prolong play. Game action becomes normal after the ball kicker
assembly serves the ball to the shooter alley.
Slamming the machine results in loss of the game. All feature lights go out, the game goes
dead, and atime delay occurs. The purpose of the time delay is to discourage unnecessary
abuse of the machine. After the delay, the Game Over’ light lites and the power-up tune is
played. The time delay occurs anytime one of the slam switches is made to contact. There are
two factory installed slam switches, on the front door, and one on left side of cabinet. (Any
number of slam switches could be installed by the operator, to meet his individual requirement.)
The switch should be adjusted to have approximately 1/16" gap between the contacts. The
weighted blade should be adjusted to attain the desired sensitivity. Decreasing the gap
between contacts will make the switch more sensitive. Opening the gap will reduce sensitivity.
'Some tunes and features can be disabled by operator If so desired See Back Box Adjustments
NOTE; ;Scoring and feature units will differ from game to game.
2

III. BOOKKEEPING FUNCTIONS
The game is designed to help the operator perform certain accounting functions. The game can
display the number of total plays and replays (free games). It can display the number of coins
dropped down each coin chute. The bookkeeping functions are displayed on all player score
displays simultaneously. An identification number, 05 to 15, appears on the Match/Ball in Play
window as follows: 1
05—00 to —40 =Current Credits
*06 100000 to—99999 =Total Plays (Payed &Free Games)
*07 10000 to—99999 =Total Replays (Free Games)
08—00 to —99999 =Game Percentage
09 00 to 99999 =Total times ‘High Score to Date’ is beat
*1 0—10000 to—99999 =Coins Dropped thru Coin Chute #1
*11 —10000 to—99999 =Coins Dropped thru Coin Chute #2**
*1 2—10000 to—99999 =Coins Dropped thru Coin Chute #3**
*1 300 to—99999 =Number of Specials awarded from Panel Specials Only
*14—00 to —99999 =Numberof minutes of Game Play
*1 5—00 to —99999 =Number of Service Credits
The game displays the first bookkeeping entry if the Self-Test button (See Fig. Ill) on the inside
of the front door is pressed ten times. Alternately push and release the Self-Test button at one
second intervals. The number 05 appears in the Match/Ball in Play’ window. Current credits
appear on the player score displays. Each additional press of the button causes the next entry
to be displayed.
After the data in each bookkeeping register is recorded, it can be set to zero simply by pressing
switch button S33, located on A4, the MPU module in the back box (See Fig. Ill), or by pressing
the Coin Chute #3 switch. Any or all registers can be cleared by alternating between the
Self-Test button and the switch button S33 on the MPU module or Coin Chute #3 switch. The
operator is given this option as apossible convenience and can elect to use or not use it as his
needs direct.
Pressing the button 5more times causes the game to play the power-up tune and liqht the
Game Over light.
Service credits are designed to allow the serviceman to test the game under actual play
conditions without disturbing the bookkeeping records that reside at identification numbers 06 '
07, 10, 11 and 12.
To obtain Service Credits, push and release the Self-Test switch until identification number 05
appears in the Match/Ball in Play’ window. Hold in the Credit button until the desired number of
Service Credits (up to five) appears on the player score displays.
NOTE: If, upon accessing identification number 05, anumber of credits greater than five is
displayed, pressing the credit button has no effect.
Identification number 15is reserved as arecord of the number of Service Credits used.
•The 10,000 level is pre-set at the factory; can be set to zero, initially, it desired .
"
If Coin Chute is not used in game, number displayed (if other than 00) on Player Score displays has no significance.
NOTE: if Total Play register is reset to zeroes then Total Replays" register should also be reset to zeroes to maintain the
game percentage value.
3

A. ABCD FEATURE: FEATURE OPERATION &SCORING
Making A&Btop rollovers, top arrow lites alternate to score 25,000 points.
Making A-B-C &Drollovers, drops one or two drop targets from 7bank (depending on SW. #8 setting)
and lites the right lane lite for 20K 1st time, 40K 2nd, 60K 3rd &so on.
A-B-C-D also flashes the bumper for 3000 points when made in this sequence. 1st time left bumper,
2nd time right bumper, 3rd time bottom bumper. Bumper flashing will reset after each ball.
B. SAUCER FEATURE
Saucer scores top Right lane SPL W/L and scores 500 or 7000 points for each lit ball on pool table,
plus super bonuses of 56K and 112K timer multipliers (depending on SW.#16 setting)
C. INLINE DROP &BANK SHOT TARGET FEATURE
1st target down 5000 points awarded and 2X lites.
2nd target down 10,000 points awarded and 3X lites.
3rd target down 15,000 points awarded and 4X lites.
4th target down 20,000 points awarded and 5X lites.
Bank shot 1st time hit scores 50,000 points, 2nd time (1 replay), bank shot values ALT or after SPL is
made, will camp on 50,000 points (depending on SW. #24 setting)
D. NO RECALL ON MULTIPLIERS
E. SINGLE DROP TARGET FEATURE
It scores 500 points if no right lane lite is lit, or will score the lite value and will advance it to next higher
value. When target is down, it will not come back up until ball is ejected thru saucer and come thru
either lane Aor B.
F. ROLL OVER BUTTON FEATURE
Rollover button scores as follows:
500, 10,000, 30,000, 50,000, EXTRA BALL, 70,000, SPL, and then will camp on 70,000 Pts. Or will
score 500, 10,000, 30,000, 50,000, EXTRA BALL, 70,000 Pts. and will stay on 70,000 after this
sequence is completed, on next ball will score 500, 10,000, 30,000, 50,000, 70,000, SPL, and will
camp back on 70,000 Pts. (depending on SW. #14 setting).
G. 7BANK DROP &DELUXE TARGETS FEATURE
Knocking 1thru 7or 9thru 15targets, single target 8ball will flash. 2000 points for each target and 3000
points for each deluxe target is awarded when hit. Deluxe lites will not come on until 8ball target is
made. When 8ball is made, deluxe lites will flash few times and will stay lit. By knocking the deluxe
lites, 1st time 50,000 points will be awarded and deluxe SPL will lite, or 7targets will reset (depending
on SW. #23 setting)
Two more SWITCHES are involved with deluxe feature:
SW. #21 can recaii or reset the deluxe lites after each ball.
SW. #22 can advance the deluxe lites on backbox on any time deluxe on playfield is made or only
when playfield SPL deluxe is made.
SW. #24 is also provided for deluxe feature on playfield to score as follows:
See page 7for deluxe 50K or special lite adjustment.
H. OUTLANE SPECIAL FEATURE
When right lane values are advanced all the way to top, the outlanes will lite to alternate for SPL.
4

*• 8BALL spl feature
Could be turned on with 56K, and 112K bonus or with 112K bonus only.
&RIGHT LANE STROBE LITES FEATURE
strobh^and they reset on^ou,hole*
6** 0r hi,s inli"° the li.es on both lanes w„, be
“.back box deluxe feature
.i,es
ewrn;,a;LL
d
.
e
u^faHaS
remadfb0X ”
™
de 9a™wil1
a
"afd °to
3
replays. Baokbox deluxe
IttoEwPOS'TION22 '^
SETTO “oJ>
SET TO “02”
SET TO “03”
BACKBOX DELUXE FEATURE
No Award
One Credit
Two Credits
Three Credits
Sp»rEf,AL REPLAY/X‘BALL/NOVELTY modes
^Self test position 16
playfield X-Balls and Specials
8Ball Special
Deluxe Special
Saucer Special
Left or right out Special
Inline target special
Left lane Special
Left lane X-Ball
Self -test position 17
Scoring Thresholds
®°’99° if same P|ayer shoot again is lit.
()25,000 if same player shoot again is lit.
Set to “03”
""Award
Replay
Replay
Replay
Replay
Replay
Replay
X-Ball
Set to ”03”
Award
Replay
Set to “02”
Award
X-Ball*
X-Ball*
X-Ball*
X-Ball*
X-Ball*
*
X-Ball**
Set to “02”
Award
X-Ball‘*
Set to “01”
Award
50,000
50,000
50,000
50,000
50,000
50.000
25.000
Set to “01”
Award
No Award
s
Z2d-O.I
J.c
c~ ^

V. GAME ADJUSTMENTS
A. Ptayfield Panel Post Adjustments:
Posts that control left and right outlane opening on panel can be removed to make access
to outlanes easier or harder for ball to enter. See Figure II.
Easier entry will decrease playing time and scoring (conservative).
Harder entry will increase playing time and scoring (liberal).
B. Back Box Game Adjustments:
Each game has thirty-two switches located on A4, the MPU module, located in the back
box, that allow play to be customized to the location. See Figure III. Credits per coin,
maximum credits, credit display, balls per game, match feature, high game feature,
special award and melody are selectable by means of the switches. The switches are
contained in four-sixteen lead packages numbered Si-8, S9-16, S17-24, and S25-32 for
easy identification. The “ON” toggle position is marked on the assembly. Turn off power
before making adjustments.
Credits/Coin Adjustments:
The credits per coin are selectable by means of S17-S20 for coin chute #2 (Center). The
switch settings and resultant credits/coin are as follows:
S20 S19 SIB S17 Credits/Coin S20 S19 SI 8S17 Credits/Coin
OFF OFF OFF OFF Same as Coin Chute #1 Settings ON OFF OFF OFF 8/1 Coin
OFF OFF OFF ON 1/1 Coin ON OFF OFF ON 9/1 Coin
OFF OFF ON OFF 2/1 Coin ON OFF ON OFF 10/1 Coin
OFF OFF ON ON 3/1 Coin ON OFF ON ON 11/1 Coin
OFF ON OFF OFF 4/1 Coin ON ON OFF OFF 12/1 Coin
OFF ON OFF ON 5/1 Coin ON ON OFF ON 13/1 Coin
OFF ON ON OFF 6/1 Coin ON ON ON OFF 14/1 Coin
OFF ON ON ON 7/1 Coin ON ON ON ON 15/1 Coin
The credits given are selectable by means ot switches 1-5 incl., for coin chute #1 and
switches 9-13 incl., for coin chute #3. Thirty-one different credit ratios are available for
each coin chute. The switch settings and resultant credits/coin are listed below.
CREDITS/COIN ADJUSTMENTS
COIN CHUTE SWITCHES CREDITS
#1 (HINGE SIDE) 54321
OR #3 13 12 11 10 9
(RIGHT SIDE) OFF OFF OFF OFF OFF 1/1 Coin
OFF OFF OFF OFF ON 2/1 Coin
OFF OFF OFF ON OFF 3/1 Coin
OFF OFF OFF ON ON 4/1 Coin
OFF OFF ON OFF OFF 5/1 Coin
OFF OFF ON OFF ON 6/1 Coin
OFF OFF ON ON OFF 7/1 Coin
OFF OFF ON ON ON 8/1 Coin
OFF ON OFF OFF OFF 9/1 Coin
OFF ON OFF OFF ON 12/1 Coin
OFF ON OFF ON OFF 14/1 Coin
OFF ON OFF ON ON 1/2 Coins'
OFF ON ON OFF OFF 2/2 Coins'
OFF ON ON OFF ON 3/2 Coins'
OFF ON ON ON OFF 4/2 Coins'
OFF ON ON ON ON 5/2 Coins'
ON OFF OFF OFF OFF 6/2 Coins*
ON OFF OFF OFF ON 7/2 Coins'
ON OFF OFF ON OFF 8/2 Coins*
ON OFF OFF ON ON 9/2 Coins*
ON OFF ON OFF OFF 12/2 Coins*
ON OFF ON OFF ON 14/2 Coins*
ON OFF ON ON OFF 1/1st Coin
ON OFF ON ON ON 0/1 st Coin*
ON ON OFF OFF OFF 0/1st Coin*
ON ON OFF OFF ON 1/1stCoin
ON ON OFF ON OFF 1/1st Coin
ON ON OFF ON ON 1/1 st Coin
ON ON ON OFF OFF 0/ 1st Coin***
ON ON ON OFF ON 0/1st Coin"
ON ON ON ON OFF 0/ 1st Coin*** 1
ON ON
'No Credits until 2nd coin is dropped ON ON ON 0/1 st Coin***
"No Credits until 4th coin is dropped
"*No Credits until 3rd coin is dropped.
'"No Credits until 5th coin is dropped.
TOTAL
CREDITS CREDITS CREDITS CREDITS CREDITS/COINS
2/2nd Coin -3/2
1/2nd Coin 1/3rd Coin 1/4th Coin 3/4
1/2nd Coin 0/3rd Coin" 2/4th Coin 3/4
1/2nd Coin 1/3rd Coin 2/4th Coin 5/4
2/2nd Coin 1/3rd Coin 3/ 4th Coin 7/4
2/2ndCoin 2/3rd Coin 2/4th Coin 7/4
0/2nd Coin*** 1/3rd Coin 1/3
0/2nd Coin" 0/3rd Coin" 1/4th Coin 1/4
0/2nd Coin**** 0/3rd Coin*”* 0/4th Coin*"* 1/5th Coin 1/5
0/2nd Coin*** 1/3rd Coin 0/4th Coin"" 1/5th Coin 2/5
5

MAXIMUM CREDITS:
by coining, by winnin^eplay^o^both The maxi^um^ nTber
f
of 9ames that can be accumulated
switches 25 and 26. Four credit limits are availSS^S^ ^^°f
CA
RX
ED,TS
M
2
S
6
W,TCHE
2S
5
]0 OFF OFF
15 OFF ON
25 ON OFF
40 ON .ON
BALLS PER GAME: #BALLS /GAME
5
4
3
2
SWITCHES 32
OFF
ON
OFF
ON
31
ON
OFF
OFF
ON
MATCH FEATURE:
number mTch^ in P'ay window and the
awarded. The Match Feature creates an incentive to play 99 P8yerS SC°re’8free game is
MATCH
ON
OFF
CREDIT DISPLAY: CREDITS DISPLAYED
YES
NO
SWITCH 28
ON
OFF
SWITCH 27
ON
OFF
HIGH SCORE FEATURE:
see Ba""a, each o. ,he two or three score levets.
AWARD
REPLAY
EXTRA BALL
NOVELTY
NO AWARD
SELF TEST Jfj
POSITION 16
SE3UTO “03"
SET TO “02-
SET TO “01-
SET TO “00-
SELF TEST
POSITION 17
&ELICUQ3:
SET TO 02-
SET TO "01-
SET TO “00"
Fokina,ions otreptay/X-haIPNoveity Modes see page 4A K. Spec,a, Rep,lay/X-batt,/Novelty
HIGH SCORE TO DATE OR OVER 10,000,000 SCORE FEATURE:
jo, 000,000 pomt 9nEach timethi^ha^ns Thewnmnq'^^^1
*h°K{°date 'Sbeat °rplayer exceeds
This score is displayed on all 4player score disDlavs atm
^
cora b®comes {he new high score to beat
Recommended setting is underlined. SP'8yS 8t the end of each game as an incentive to p?ay.'
high score to date feature
No Award
One Credit
Two Credits
Three Credit
SELF TEST POSITION 19
SET TO “00"-
SET TCUmL. .
'
SET TO "02-
SET TO “03"
wr
6

h
W
^2
Vi
SOUND OPTION
The game is designed to make several tones and noises to announce power-up, game-up, etc. The
tones are intended to attract attention to the game and increase game usage. The tones are controlled
by pressing self test button until the #18 shows on the match/ball in play display. Now pulse replay
buttsw. to sourvi s><ator\<3,
.
Setting “00”
Most switches associated chimes without feature background.
Setting "01"
Playfield switches associated chimes with background.
Setting “02”
Most scoring will have noise effect without background.
[Setting "03"
b/ost all scoring will have anoise effect with background.
GAME FEATURE OPTIONS:
Inline target 50K or special lite adjustment:
Liberal -SW. 6ON 50K and special lites alternate.
Conservative SW. 6OFF Only 1special per ball.
Cand Drollover lane lite adjustment:
Liberal SW. 7ON Making Cor Dlane puts both lites out.
Conservative SW. 7OFF Making Cor Dlane only puts that lane lite out.
A, B, C, Drollover lane 7drop target adjustment:
Liberal SW.8 0N Completing A, B, C, Drollover drops 2targets down.
Conservative SW. 8OFF Completing A, B, C, Drollover drops 1target down.
Left lane feature step up lite adjustment:
Liberal SW. 14 OFF Lite sequence, no lite, 10K, 30K, 50K, X-Ball, 70K, SPEC., 70K
and 70K stays on
Conservative SW. 14OFF First ball sequence, no lite, 10K, 30K, 50K, X-Ball,
70K and 70K stays On.
Next ball sequence, no lite, 10K, 30K, 50K, 70K, SPECIAL
70K and 70K stays On.
8Ball Special lite adjustment:
Liberal SW. 15 ON
Conservative SW. 15OFF
Saucer hole scoring adjustment:
Liberal SW. 16 ON
Conservative SW 16 OFF
Completing 8-Ball 2nd and 3rd time scores 1replay each.
Completing 8-Ball 3rd time scores 1replay.
Saucer scores rack and bonus values plus any lit
2X, 3X, 4X or 5X.
Saucer scores rack and bonus values only.
Panel D-E-L-U-X-E lite next ball adjustment:
Liberal SW. 21 ON Any D-E-L-U-X-E lite out will not come on after
completion of 8-Ball for next ball.
Conservative SW. 21 OFF Any D-E-L-U-X-E lite out will come back on after
completion of 8-Ball for next ball.
Back Box D-E-L-U-X-E lite advance adjustment:
Liberal SW.22 0N Completing playfield D-E-L-U-X-E advances back
D-E-L-U-X-E 1step each time.
Conservative SW. 22 OFF Completing playfield D-E-L-U-X-E advances back
D-E-L-U-X-E only when special is lit.
Panel D-E-L-U-X-E 7drop target reset adjustment:
Liberal SW. 23 ON Completing 8-Ball and Deluxe does not reset 7 drop
targets until outhole.
Conservative SW. 23 OFF Completing 8-Ball and D-E-L-U-X-E will reset targets.
DELUXE 50K OR SPECIAL LITE ADJUSTMENT:
Liberal SW. 24, 6ON Lites Special, 50K, Special, 50K.
Medium SW. 24 OFF, 6ON Lites 50K, Special, 50K, Special.*
Semi-Medium SW. 24 ON, 6OFF Lites Special, 50K, 50K, 50K.
Conservative SW. 24, 6OFF Lites 50K, Special 50K, 50K.
Number of games replays per game adjustment:
Liberal SW. 29 ON All replays earned will be collected.
Conservative SW. 29 OFF Only 1replay per player per game.
Game Over Attract Adjustment:
SW. 30 ON Voice says “Quit talking and start chalking"
“8-Ball Deluxe."
SW. 30 OFF No Voice
7

C. FRONT DOOR GAME ADJUSTMENTS
High Score Feature Adjustments:
a, each o, three score
(00) any or all ofth^terelsjhdested8'1te ^“deSired'
"
is also Possible to reset or turn off
1•Push and release Self-Test button (See Fioum im
ta *0e credit button in. To decre^ete a!*-?-?.
1?te leased, if
desired, by hofoing the credit buttonin ^octecreasethes!?6T®';' "Can increased, if
nnm£Pr6SS and release ,he Self-Test button Release the? the credit button in
number appears. Note that the level changes 10noo f,
bUtt0n when ,he desired
eft on the displays, the high score feature! eliminatedfor that let??' "““ nUmber Wis
3. Reoeat stone iQnH Oxi
_~v- ioc,,,, u, taiearor that level.
isoT?' PlaTC^m fort "* nUmbers
respectively. yQlspiay are for the second and third levels,
High Score to Date and 10,000,000 Feature:
excels 10S
000SMo%wsWard fr0e 93meS Wh®n‘H'9h Score '° Date’ is beat, or if the player
mco^StlTotntumgegame piL^The ad T* ^periodl»* reset 10 thd factor
High Score Feature Adjustment, Steps 1and 2Cnnt!n Sment procedure <s the same as for the
identification number ’04’ appears on the «»
Any level from ‘00’ to 99Qn nnn nor. u.oep 2.
Off,he feature, as itdo^on f*ia *° *noted tha, ’00’ does NOT turn
discussed under 'Back Box Game AdmustiUntJ’ 6'StUmed 0,f by self ,est P°si'i°n 19 as
SELF TEST SETUP FOR 16-22:
Ste!te?X!“ sho-in play. N,
ositions 20, 21 setups go from “00” thru “15” ’RePeatfor positions 17. 18,19or£
SOUND
Boart T*™is als, aMas ™S!™ and Taa
asr--— rsssi..
8

A. R-521
RUBBER PARTS
WDIA. (D
B. R-521-1 1"DIA. (2)
C. R-521-2 V/t" DIA. (4)
D. R-521 -4 2Vi" DIA. (2)
E. R-533-3 FLIPPER (3)
F. R243 5/16" DIA. (10)
PANEL TOP PARTS
1. Arch Rail
2. Rail Post
3. Rail Post Cap
4. Bottom Arch
5. Shooter Gauge
6. Ball Gate.(R)
7. Ball Gate (L)
8. Screened Plastics (Set)
9. Thumper Cap
10. Thumper Cap Collar
11. Ball Gate
12. Plastic Ball Guide (Blue)
13. Rollover Wire &Brkt.
14. Targets Switch Assy.
15. Rollover Button
16. Ball Guide Assy.
17. (4) Inline Target Assy.
18. (1) Inline Target Assy.
19. Minipost &Rubber
20. (7) Drop target
Assy./Memory
21. Flippers Shaft Assy.
22. Ball Guide Wire
23. Rollover Wire SBracket
24. Ball Guide Assy. (L)
25. Ball Guide Assy. (R)
26. Buffer Wire
27. Ball Return Wire SBrkt.
Clear Plastics (Set)
(Not Shown)
28. Ball Guide Wire
29. Bail Gate Assy.
LIB. -LIBERAL
MED. -MEDIUM
CONS. -CONSERVATIVE
INDICATES MOVABLE POSTS
FOR SCORING ADJUSTMENTS
M-1 774-6
C-907 (3)
C-908 (3)
P-5871-84
P-6359-45
A-1475-13
A-1475-12
A-2890-151
A-4009-1 (3)
A-4011-1 (3)
ASE-2250-27
C-935-2 (3)
ASE-2806 (4)
ASE-2911-3
C-900
A-3032-69
ASE-2993-12
ASE-2993-5
ASE-2836-2 (3)
ASE-3038-3
ASE-2214-21 (3)
M-1 21 -27 (2)
ASE-2806-1(2)
A-2898-39
A-2898-38
M-1 21 -53 (2)
ASE-2806-21
A-2890-152
M-121-93
ASE-2250-85
9

FIGURE 3E. ELECTRONIC PIN BALL MACHINE

RECOMMENDED
Instruction, Score Cards and High Score Feature Settinqs
to be used on EIGHT BALL DELUXE
5-BALL
REPLAYS
Instruction Card M-1508-98-E
ScoreCard M-1508-98-A
1Replay at 1,000,000
1Replay at 2,000,000
EXTRA BALL
Instruction Card M-1508-98-F
Score Card M-1 508-98-A W/NN-1
1Extra Ball at 1,000,000
1Extra Ball at 1,600,000
ADDITIONAL CARDS
REPLAYS
M-1508-H-1 400,000 950,000
M-1 508-1-1 450,000 1,000,000
M-1508-J-1 500,000 1,000,000
M-1508-K-1 500,000 1,100,000
M-1508-L-1 550,000 1,100,000
M-1508-M-1 600,000 1,100,000
M-1508-N-1 650,000 1,200,000
M-1 508-0-1 700,000 1,200,000
M-1508-P-1 700,000 1,400,000
M-1508-Q-1 800,000 1,400,000
M-1508-R-1 900,000 1,400,000
M-1508-S-1 900,000 1,500,000
M-1 508-T-1 1,000,000 1,500,000
M-1508-U-1 1,000,000 1,600,000
M-1508-V-1 1,000,000 1,800,000
M-1508-W-1 1,000,000 2,000,000
M-1508-X-1 1,100,000 1,800,000
M-1508-Y-1 1,100,000 2,000,000
M-1508-FF-1 1,200,000 2,000,000
M-1508-GG-1 1,300,000 2,000,000
M-1508-HH-1 1,400,000 2,100,000
M-1 508-11-1 1,400,000 2,200,000
EXTRA BALL
M-1508-NN-1 1,000,000 1,600,000
M-1 508-00-1 1,000,000 2,000,000
M-1508-PP-1 1,200,000 2,200,000
M-1508-QQ-1 1,400,000 2,400,000
Instruction Card, Novelty
M-1508-98-G
BLANKS (3)
High game to date recommended levels;
(reset periodically)
3BALL 1,300,000
5BALL 2,200,000
3-BALL
REPLAYS
Instruction Card M-1508-98-E
Score Card M- 1508-98-B
1Replay at 600,000
1Replay at 1,100,000
11

RECOMMENDED settings
rap.w
iswmmenDEI
|ball spIc“Tu?I step up
PANELDR nvESC0RING
BACK BOX DELUX^ ,t!XT BALL
panel DELUXEU
7
XnonT
D
E-^DVANCE
DELUXE 50K ORSPECm/^QGET RESET
NUMBER OF REPLAY? pci^6Pa9e7)
game over attract RGAME
RAI^f PER GAME
balls per game
replay
Instruction Card
Score Card
Major Mode
Match
Nigh Score to Date
X-BALL
Instruction Card
Score Card
Major Mode
Match
High Score to Date
NOVELTY
Instruction Card
Major Mode
Match
High Score to Date
3-BALL
M-1508-98-E
M-1508-98-B
Seif Test Position 16 17
Set to “03”
SW. 28 ON
Self Test Position 19
Set to “03”
M-1508-98-G
Self Test Position 16 17
Set to “01”
SW. 28 OFF
Self Test Position 19
Set to “00”
SW. 6
SW. 7
SW. 8
SW. 14
SW. 15
SW. 16
SW. 21
SW. 22
SW. 23
SW. 24
SW. 29
SW. 30
SW. 31
SW. 32
3-BALL
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
5-BALL
ON
OFF
ON
ON
OFF
ON
OFF
ON
ON
OFF
ON
ON
ON
OFF
5-BALL
M-1508-98-E
M-1508-98-A
Self Test Position 16 17
Set to “03”
SW. 28 ON
Self Test Position 19
Set to “03”
M-1508-98-E
M-1508-98-AW7NN-1
Self Test Position 16 17
Set to “02”
SW. 28 OFF
Self Test Position 19
Set to “00"
M-1508-98-G
Self Test Position 16 17
Set to “01”
SW. 28 OFF
Self Test Position 19
Set to “00”
12

VIII. ROUTINE MAINTENANCE ON LOCATION:
Self-Test routines are written into the game design. They are particularly useful for routine
maintenance. The tests are described below. The first test is automatic and occurs on
power-up. This test causes the MPU module A4 to examine itself for failures. Seven flashes of
an LED indicates proper operation. The second series of self-diagnostic tests causes the MPU
to ‘exercise’ each of the other modules in such away as to make their faults, if any, obvious.
See Figure III and Page ii.
It is recommended that these tests be used several times aweek to check out the games
before play. If faults are discovered, they may be corrected on location if the operator has a
stock of replacement modules. See "Trouble Shooting on Location.”
MPU Module Self-Test:
At power on, the LED on the MPU module flashes once. (Flicker-Flash). After apause, it
flashes six more times and goes out. Apower-up tune is played to announce game readiness.
This indicates proper MPU operating condition and successful completion of the power-up
test.
Game Self-Diagnostic Tests:
1.Pressing the Self-Test button inside the door initiates the Self-Test routine. See Figures III
and IV. All switched lamps flash off and on continuously.
2. Pressing the Self-Test button again causes each digit on each display to cycle from 0thru
9, and repeat continuously.
3. Pressing the Self-Test button again causes each solenoid to be energized, one at atime,
in acontinuous sequence. Hold both flipper buttons 'in' during this test. The number
appearing on the Player Score displays is the same as the number assigned to the solenoid.
The sound of asolenoid pulling-in as anumber appears indicates proper operation. The
absence of sound is improper. If sound is absent, see Page 17 for help in Solenoid
identification.
4.Pressing Self-Test button again causes the sound module to play the “Game Over" tune
repeatedly.
5. Pressing the Self-Test button again causes the MPU to search each switch assembly for
stuck contacts. If any are found, the number of the first set encountered is flashed on the
Player Score displays. The number remains until the fault is cleared. See Page 17for help in
Stuck Switch identification. Other numbers may follow if more stuck contacts are present. If
there are no stuck switches, the Match/Bali in Play display flashes ‘O'.
6. Pressing the Self-Test button 23 more times causes the MPU to step thru the threshold
and bookkeeping functions described previously and finally to repeat the power-up test. For
more rapid exit to power-up, turn the game off, then on. The game is now ready to play.
After successful completion of the Self Diagnostic Test procedure, set the game up for play.
Exercise each rollover, thumper-bumper, slingshot, etc., by hand until each switch assembly
on the playfield has been checked for proper operation. If actuating aswitch assembly
results in intermittent or no response, clean contacts by gently closing them on aclean
business card or piece of paper and wiping until they wipe clean. Regap, if necessary, to
1/16 ". Do not burnish or file Gold Plated Switch Contacts.
IX. TROUBLESHOOTING ON LOCATION
The game is designed to make troubleshooting easy. Several simple procedures are given
herein that cover the greatest, percentage of game failures. They are written for an operator on
location and require module replacement. (See Figure III) Symptoms and the action to be
taken are given for each type of problem.
If the problem is more complicated and is not solved by following this procedure, more detailed
procedures are available from Bally. See the Parts List for ordering information.
13

FIGURE IV SELF DIAGNOSTIC TEST
(6) IORUffjjfSgjgf
hold flipper buttons in during test.
14

1A)
2A)
2B)
3A)
3B)
SYMPTOM: Game does not play power-up tune when power is turned on. General
Illumination is present.
ACTION:
CAUTION:
SYMPTOM:
ACTION:
SYMPTOM:
ACTION:
SYMPTOM:
ACTION:
SYMPTOM:
ACTION:
A) Turn power OFF.Open back box, Locate light emitting diode (LED)
on MPU module A4.
B) Turn Power ON. LED must flash 7X to indicate that module A4 is
good. Correct flash sequence is flicker/flash-pause-and then six more
flashes and LED goes out.
C. If LED does not come on, or does not flash, or flashes, but less than
7X, turn off power. Replace MPU module A4.
Replacement MPU Module must have same Part Number or incor-
rect operation will result! See Parts List for MPU Module Part
Number.
Turn power ON.
D) If game is correct, it is now ready for play. If game is not correct, refer
to Module Replacement procedure. (See Parts List.)
Not all feature lamps light during game play.
A) With power ON, open front door. Press button (Self-Test switch)
once. If the game is correct, all feature lamps flash ON and OFF.
B) Carefully raise playfield or open back box to gain access to lamps.
C) Replace bulbs that do not flash.
D) If game is correct, it is now ready for play.
E) If game is not correct, turn power OFF Replace Lamp Driver Module
A5. Turn power ON and repeat A.
F) If game is correct, if is now ready for play.*
G) If game is not correct, turn power OFF. Replace MPU module A4.
See CAUTION 1C. Turn powerON and repeat A.
H) If game is correct, it is now ready for play.* If game is not correct, refer
to Module Replacement procedure. (See Parts List.)
One or some switched lamps always ON.
Repeat 2AA, AB, AE. and AF and. if necessary AG &AH.
Display digits improper on one or several, but less than all Display
Driver module(s). A1. Improper: One or several segments always OFF
digits mottled or several segments or digit(s) always ON.
A) With power ON, open front door. Press button (Self-Test switch)
twice. If the game is correct, each digit on each Display Driver Module A1
(5 used/game) displays the count 1-9 and 0continuously in all 6digit
positions. Note defective Display Driver modules.
B) Turn power OFF.
CAUTION: High Voltage is supplied to the Display Driver Modules,
A1, from the Solenoid Driver/Voltage Regulator Module A3. Wait 30
seconds for High Voltage to Bleed Off.
C) Replace Display Driver module(s) Al. Turn power ON. Repeat A.
D) If game is correct, it is now ready to play *If game is not correct, refer
to Module Replacement procedure. (See Parts List.)
All displays improper (all five display Driver modules). Improper: Digit(s)
always on or off/segment(s) always on or off, all displays.
A) Repeat 3AA, and AB.
B) Replace MPU module A4. See CAUTION NOTE, 1C. Turn Dower
ON. Repeat A.
15