Bally ProSlot 5500 Setup guide

ProSlot® 5500
MODULE 2
MK2-S5MOD-0001
SET UP AND OPERATION
©2000 BALLY GAMING AND SYSTEMS ALL RIGHTS RESERVED 6601 South Bermuda Road Las Vegas, NV 89119
Bally Gaming and Systems

For Customer Service and information:
[phone] Outside the U.S.
1-877-GO-BALLY (877) 46-22559 in the U.S. and Canada
896-7772 in Las Vegas
FAX: [phone]
or visit our website at http://www.ballygaming.com

2-3
SET UP AND OPERATION
© BALLY GAMING AND SYSTEMS
®5500
Module 2 
Setup & Operations Table of Contents
Major Components Diagram - Upright ................................................................................................................. 2-5
Major Components Diagram --Slant Top ............................................................................................................. 2-6
Specifications ........................................................................................................................................................ 2-7
Electrical Specifications .............................................................................................................................. 2-7
Enviromental Specifications ........................................................................................................................ 2-7
Physical Specifications ............................................................................................................................... 2-7
Setup ...................................................................................................................................................................... 2-9
MPU Jumper Selections ............................................................................................................................. 2-9
Battery Enable ............................................................................................................................................ 2-9
Door Open Detect Circuit ............................................................................................................................ 2-9
DIP Switch Selections ............................................................................................................................... 2-10
SafeRAM™ Clear Procedure .....................................................................................................................2-11
Demo Mode .............................................................................................................................................. 2-12
Real Time Clock (RTC)............................................................................................................................. 2-12
Data Collection and Bonusing Systems .................................................................................................... 2-12
Machine Options ................................................................................................................................................. 2-12
Machine Option Table ............................................................................................................................... 2-13
Tower Light Options .................................................................................................................................. 2-14
Option Descriptions .................................................................................................................................. 2-14
Machine Operation .............................................................................................................................................. 2-17
Message Center ....................................................................................................................................... 2-17
WIN PAID Decimal Points ............................................................................................................................. 2-17
Playing A Game ........................................................................................................................................ 2-17
Credit Collect Messages ........................................................................................................................... 2-18
Accounting ........................................................................................................................................................... 2-18
Machine Meter Groups ............................................................................................................................. 2-19
Bookkeeping Meters ................................................................................................................................. 2-20
Win Records ............................................................................................................................................. 2-20
Game Recall ............................................................................................................................................. 2-21
Game Summary ....................................................................................................................................... 2-22
Bill Transactions ....................................................................................................................................... 2-22
Bill Transaction History ............................................................................................................................. 2-23
Progressive Jackpots ............................................................................................................................... 2-23
Current Progressive Values ...................................................................................................................... 2-24
SAS EFT History....................................................................................................................................... 2-24
Doors ........................................................................................................................................................ 2-24
Concept3®................................................................................................................................................. 2-24
Diagnostic Tests and Functions ......................................................................................................................... 2-25
#1 Model Information ................................................................................................................................ 2-25
#2 Output Test .......................................................................................................................................... 2-26
#3 Input Test ............................................................................................................................................. 2-28
Bill Acceptor Input Test ....................................................................................................................... 2-28
Coin Acceptor Test ............................................................................................................................. 2-28
Input Ports .......................................................................................................................................... 2-28

2-4 ProSlot® 5500
© MARCH 2000
Diagnostic Tests and Functions (cont)
#4 Hopper Test ......................................................................................................................................... 2-29
#5 Reel Function Test ............................................................................................................................... 2-29
#6 Reel Tape Test ..................................................................................................................................... 2-29
#7 Reel Tilt and System Reset Records ................................................................................................... 2-29
#8 Slot Communications Test ................................................................................................................... 2-30
#9 Display Test ......................................................................................................................................... 2-30
#10 Payout Test ........................................................................................................................................ 2-30
Troubleshooting .................................................................................................................................................. 2-34
Power ON Malfunctions ............................................................................................................................ 2-31
Tilt Messages ........................................................................................................................................... 2-31
Coin Acceptor Malfunctions, 2x Series Exception (tilt) Codes ................................................................... 2-31
Hopper Malfunctions, 3x Series Malfunction (tilt) Codes ........................................................................... 2-31
Reel Malfunctions, 4x and 7x Series Malfunction (tilt) Codes ................................................................... 2-32
Memory Malfunctions, 8x Series Malfunction (tilt) Codes.......................................................................... 2-32
Communication Errors, 9x Series Malfunction (tilt) Codes ....................................................................... 2-32
Malfunction and Game Codes .................................................................................................................. 2-33
Setup & Operations Table of Contents (cont.)

2-5
SET UP AND OPERATION
© BALLY GAMING AND SYSTEMS
®5500
Module 2
Setup & Operation
Major Components Diagram - Upright

2-6 ProSlot® 5500
© MARCH 2000
Major Components Diagram --Slant Top

2-7
SET UP AND OPERATION
© BALLY GAMING AND SYSTEMS
®5500
Specifications
Electrical Specifications
Enviromental Specifications
Ambient Temperature:
Max: 100°F (38°C) Min: 40°F (4°C)
Maximum Relative Humidity: 90%
Average Heat from Machine: 500 BTU/Hr.
Physical Specifications
elytS A B C D E F thgieW
S05
7
/
8
"
mc42.921
"¼93
mc7.99
02
5
/
8
"
mc93.25
22
1
/
8
"
mc2.65
13
31
/
61
"
mc8.08
82
1
/
61
"
mc75.57
bl682
gK37.921
S
)dednetxE(
35
3
/
8
"
mc75.531
"¼93
mc7.99
02
5
/
8
"
mc93.25
22
1
/
8
"
mc2.65
13
31
/
61
"
mc8.08
82
1
/
61
"
mc75.57
bl982
gK90.131
tenibaC
elytS
htdiW htpeD thgieH .xorppA
thgieW
A B C D
TU "91
mc62.84
"¼22
mc25.65
"02
mc08.05
"½03
mc74.77
bl002
gK27.09
TL "¼12
mc89.35
"½42
mc32.26
"02
mc08.05
"½03
mc74.77
bl202
gK26.19
TV "91
mc62.84
"¼22
mc25.65
"02
mc08.05
"04
mc06.101
bl602
gK44.39
TC "¼12
mc89.35
"½42
mc32.26
"02
mc08.05
"04
mc06.101
bl212
gK61.69
TX "91
mc62.84
"¼22
mc25.65
"02
mc08.05
"¼64
mc84.711
bl412
gK70.79
TW "¼12
mc89.35
"½42
mc32.26
"02
mc08.05
"¼64
mc84.711
bl712
gK34.89
T7 "91
mc62.84
"¼22
mc25.65
"02
mc08.05
"¼25
mc27.231
bl222
gK07.001
TH "¼12
mc89.35
"½42
mc32.26
"02
mc08.05
"¼25
mc27.231
bl722
gK79.201
“S” Style Cabinet
“T” Style Cabinet
egatloVeniLzH06/05CAV042/021
ylppuSrewoP
stuptuO CDV42+,21-,21+,5+
etatSenihcaMeldIyalPtuoyaP mumixaM
warDlaciterehT
CAV021@tnerruCpmA1.1 2.1
pmA
7.1
pmA pmA53.2
CAV042@tnerruCpmA55. 6.
pmA
58.
pmA pmA81.1
rewoPW121W231W781W952
WARNING: Use a maximum of
six machines for each 120VAC
20A grounded circuit.

2-8 ProSlot® 5500
© MARCH 2000
Installing the Machine
Installation Checklist
Review environmental and power requirements
Unpack and inspect machine
Secure the machine to the stand (upright)
Install locks
Setup
SafeRAM™ Clear
Set game options
Review Power and Enviromental
Requirements
Line power must provide an earth ground for safe
operation. Do not overload the circuit. Refer to Electrical
Specifications on page 2-6 for more information.
A B C D E F G H J
"82
mc21.17
71
51
/
23
"
mc73.44
6
71
/
23
"
mc16.61
"½1R
mc18.3R
32
31
/
23
"
mc54.95
3
7
/
23
"
mc51.8
3R"
mc26.7R
R
7
/
61
"
mc21.1R
7
5
/
23
"
mc61.81
K L M N P Q R S
71
9
/
61
"
mc16.44
41"
mc65.53
12
51
/
23
"
mc35.45
81"
mc27.54
21
5
/
8
"
mc11.23
01"
mc34.52
2
31
/
46
"
mc95.5
1
31
/
61
"
mc06.4
Unpack and Inspect Machine
Unpack and inspect the machine. If the machine is
damaged, contact your Bally Gaming and Systems
Distributor or Customer Service Representative for
Return Merchandise Authorization (RMA) information.
Carefully unpack and remove all loose parts.
Verify that the power cord is properly routed out of the
cabinet. Remove all packing materials from the hopper.
Locate the cloth bag of lock cams and mounting
hardware.
Verify Specific Model Information (SMI)
information before continuing to install the machine.
Secure the Machine
Remove the hopper. Mark the center of the stand.
Drill the required mounting, drop chute, and power cord
holes. Using a lifting device, place the machine on the
stand and route the power cord through the stand hole.
Bolt the machine to the stand. Inspect for loose
connectors and verify all printed circuit boards are firmly
seated.
Footprint - ProSlot®5500

2-9
SET UP AND OPERATION
© BALLY GAMING AND SYSTEMS
®5500
snoitceleSrepmuJUPM
repmuJ gnippihS
noitisoP esopruP noitisoP 1
noitisoP
2
1WJTUOannetnAlanretxENITUO
2WJNIetatStiaWNITUO
4WJK215eziSMORPEK652K215
5WJK215eziSMORPEK652K215
6WJK215eziSMORPEK652K215
8WJNIannetnABCPNITUO
9WJ232-SRdradnatSlaireS232-SR224-SR
01WJNI)desunu(raelC™MARefaSNITUO
11WJTUOhctaLnepOrooDBBVNITUO
21WJTUOyrettaBNITUO
31WJNIyeK™MARefaSNITUO
41WJNIMARotTTABVNITUO
1
3
2
1
3
2
Position 1 Position 2
1 2
OUT
1 2
IN
Setup
Plug the line cord into a grounded power source,
but do not turn the machine on.
IInstall Locks
Door, Stand, and other high-security locks should
be ordered by the Operator from a reliable lock supplier.
See Module 3 Assemblies, Parts, & Hardware for lock
specifications.
Remove the large and small nuts from the lock
and insert the lock into the lock opening. Check the lock
for proper orientation before securing. Secure the lock
with the large nut. Place the cam stop on the lock cylinder.
Attach the lock cam to the shaft and verify that it moves
in the correct direction. Secure the lock cam with the
washer and small nut.
Lock
Cam Stop
Force Nut
Cam
Washer
Nut
Note: The Convenience Outlet has
power although the machine power
switch is OFF.
Typical Lock & Cam Assembly
MPU Jumper Selections
Battery Enable
The Lithium battery may be disabled for shipping or
storage. To enable the battery, locate jumper JW12 near
the battery and place the jumper across the two pins.
Door Open Detect Circuit
Some jurisdictions require a signal for a door opening
while the machine power is OFF. To enable the Door Open
Latch, place the jumper at JW11 in Position 1. Default is
OUT (OFF).
The following table lists 2-pin and 3-pin jumper
selections.
WARNING: Attempting to charge
Lithium batteries can cause them to
explode.
Replace failed batteries with Bally
Gaming part E-00628-0023 or its
equivalent.
Note: If Door Open detection circuits
are enabled, an Audit Keyswitch
activation is required to remove the 82
code after power is switched ON.

2-10 ProSlot® 5500
© MARCH 2000
DIP Switch Selections
Two eight-switch DIP packages labeled on the MPU
board as JW3 and JW7 set the following machine
functions:
noitanimoneD4ws-1ws3WJ
1ws 2ws 3ws 4ws eulaV noitanimoneD
NONONONO0000005
FFO`NONONO1000052
NOFFONONO2000001
FFOFFONONO300005
NONOFFONO400052
FFONOFFONO500002
NOFFOFFONO600001
FFOFFOFFONO70005
NONONOFFO80002
FFONONOFFO90001
NOFFONOFFO010005.0
FFOFFONOFFO110052.0
NONOFFOFFO210002.0
FFONOFFOFFO310001.0
NOFFOFFOFFO410050.0
FFOFFOFFOFFO510010.0
NONONONO6100)70tekraM(4$
NONONONO7100)lanoitanretnI(5.2
JW3 - Denomination, Bill Acceptor, Reel Spin,
Diverter Optic, EFT present (MC=01)
rotpeccAlliB6ws-5ws3WJ
5ws 6ws eulaV rotpeccAlliB
NONO00rotpeccAoN
FFONO10ARS,ABI,VBDMCJ/TPG
NOFFO20ABCMCJ
FFOFFO30devreseR
The ProSlot®5500 supports crazy reel spin where
the reels spin randomly forward or reverse. Also, some
markets require an optic switch to verify Coin Diverter
position. Market Code 01 requires an additional protocol
selection for Electronic Funds Transfer.
serutaeFlaicepS8ws-7ws3WJ
7ws erutaeFemaG
NOnipSleeRlamroN
FFOnipSleeRyzarC
8ws troppuScitpOretreviD
NOtneserPtoN
FFOtneserP
10=CMdna8ws troppuSTFE
NOtneserPtoN
FFOtneserP
JW3 Switches 7-8 Special Features
JW7 Switches 1-4 Market Code
Market Code designates specific operation
according to the requirements of a gaming control agency.
edoCtekraM4ws-1ws7WJ
1ws 2ws 3ws 4ws EULAV TEKRAM
NONONONO00CLV,adaveN
FFONONON010yesreJweN
NOFFONONO20;DS,doowdaeD
adanaC,cebeuQ
FFOFFONONO30%lanimon-ecnarF
NONOFFONO40%cisab-ecnarF
FFONOFFONO50ociRotreuP
NOFFOFFONO60acirfAhtuoS
FFOFFOFFONO70noitanimoneDlaicepS
)lanoitanretnI,ZA(
NONONOFFO80anaidnI
FFONONOFFO90iruossiM
NOFFONOFFO01odaroloC
FFOFFONOFFO11ecroFriASU
NONOFFOFFO21yrettoLoiratnO
noissimmoC
FFONOFFOFFO31ippississiM
NOFFOFFOFFO41ynamreG
FFOFFOFFOFFO51ocixeMweN
JW7 - Market Code, Reel Map-Win Table
JW7 Switches 5-8 Reel Map-Win Table
The default MAP 00—WIN 00 is the only
configuration supported. JW7 sw5-sw8 should be left in
the default ON position.
Note: Jumper and DIP Switches are
enabled only once after each
Complete SafeRAM™ Clear.