B&R 2100 User manual

Panel PC 2100 swing arm user's manual V1.12 1
Panel PC 2100
swing arm devices
User's manual
Version: 1.12 (March 2017)
Model no.: MAPPC2100SW-ENG
The values and specifications listed in this manual are current as of its publication. We reserve the right
to change the contents of this manual without notice. Bernecker + Rainer Industrie-Elektronik Ges.m.b.H.
is not liable for technical/editorial errors and/or any incomplete information in this manual. In addition,
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. shall not be liable for any incidental or consequential damages
in connection with or arising from the furnishing, performance or use of the product(s) in this documentation. Soft-
ware names, hardware names and trademarks are registered by their respective companies.

Chapter index
2 Panel PC 2100 swing arm user's manual V1.12
Chapter 1: General information
Chapter 2: Technical data
Chapter 3: Commissioning
Chapter 4: Software
Chapter 5: Standards and certifications
Chapter 6: Accessories
Chapter 7: Maintenance and servicing
Appendix A

Table of contents
Table of contents
Panel PC 2100 swing arm user's manual V1.12 3
Chapter 1 General information................................................................................... 9
1 Manual history....................................................................................................................................................9
2 Safety guidelines..............................................................................................................................................11
2.1 Intended use...............................................................................................................................................11
2.2 Protection against electrostatic discharge..................................................................................................11
2.2.1 Packaging..............................................................................................................................................11
2.2.2 Guidelines for proper ESD handling.....................................................................................................11
2.3 Policies and procedures.............................................................................................................................11
2.4 Transport and storage................................................................................................................................ 12
2.5 Installation...................................................................................................................................................12
2.6 Operation.................................................................................................................................................... 12
2.6.1 Protection against touching electrical parts..........................................................................................12
2.6.2 Environmental conditions - Dust, moisture, corrosive gases................................................................12
2.6.3 Viruses and dangerous programs........................................................................................................ 12
2.7 Environmentally friendly disposal............................................................................................................... 13
2.7.1 Separation of materials.........................................................................................................................13
3 Organization of safety notices......................................................................................................................... 14
4 Guidelines.........................................................................................................................................................14
5 Overview...........................................................................................................................................................15
Chapter 2 Technical data.......................................................................................... 17
1 Introduction.......................................................................................................................................................17
1.1 About this user's manual............................................................................................................................17
1.2 Description of individual modules...............................................................................................................17
1.2.1 Display units..........................................................................................................................................17
1.2.2 System units..........................................................................................................................................17
1.3 System components / Configuration.......................................................................................................... 18
1.3.1 Configuration......................................................................................................................................... 18
2 Complete system............................................................................................................................................. 20
2.1 Mechanical characteristics..........................................................................................................................20
2.1.1 Dimensions............................................................................................................................................20
2.1.2 Mounting orientations............................................................................................................................23
2.1.3 Weight specifications............................................................................................................................ 24
2.2 Environmental characteristics.....................................................................................................................25
2.2.1 Temperature specifications................................................................................................................... 25
2.2.2 Humidity.................................................................................................................................................29
2.2.3 Vibration................................................................................................................................................ 29
2.2.4 Shock.....................................................................................................................................................29
2.2.5 Protection.............................................................................................................................................. 29
2.3 Electrical characteristics............................................................................................................................. 31
2.3.1 +24 VDC power supply.........................................................................................................................31
2.3.2 Power calculation..................................................................................................................................32
2.3.3 Block diagrams......................................................................................................................................34
2.4 Device interfaces and slots........................................................................................................................ 37
2.4.1 Device interfaces - Overview................................................................................................................37
2.4.2 +24 VDC power supply.........................................................................................................................38
2.4.3 Ethernet 1 interface (ETH1)..................................................................................................................39
2.4.4 Ethernet 2 interface (ETH2)..................................................................................................................39
2.4.5 USB interfaces...................................................................................................................................... 40
2.4.6 CFast slot.............................................................................................................................................. 41
2.4.7 Power button.........................................................................................................................................41
2.4.8 Reset button..........................................................................................................................................41
2.4.9 LED status indicators............................................................................................................................42
2.4.10 IF option slot (IF1, IFx)....................................................................................................................... 43
2.5 Components on display units with operating elements..............................................................................44
2.5.1 Button/Switching element......................................................................................................................44
2.5.2 USB interface........................................................................................................................................47

Table of contents
4 Panel PC 2100 swing arm user's manual V1.12
2.5.3 Button/Switch interface......................................................................................................................... 48
2.5.4 RFID read/write transponder unit......................................................................................................... 48
3 Individual components..................................................................................................................................... 49
3.1 Panels......................................................................................................................................................... 49
3.1.1 5AP92D.1505-0x................................................................................................................................... 49
3.1.2 5AP92D.1906-0x................................................................................................................................... 51
3.1.3 5AP93D.185B-0x...................................................................................................................................53
3.1.4 5AP93D.215C-0x...................................................................................................................................55
3.1.5 5AP93D.240C-0x...................................................................................................................................57
3.1.6 5AP99D.185B-0x...................................................................................................................................59
3.1.7 5AP99D.215C-0x...................................................................................................................................62
3.1.8 5AP99D.215I-0x.................................................................................................................................... 65
3.1.9 5AP99D.240C-0x...................................................................................................................................68
3.2 System units............................................................................................................................................... 71
3.2.1 5PPC2100.BYxx-001.............................................................................................................................71
3.3 CFast cards................................................................................................................................................ 74
3.3.1 General information...............................................................................................................................74
3.3.2 Basic information...................................................................................................................................74
3.3.3 5CFAST.xxxx-00....................................................................................................................................76
3.3.4 5CFAST.xxxx-10....................................................................................................................................79
3.4 Interface options......................................................................................................................................... 84
3.4.1 5ACCIF01.FPCC-000............................................................................................................................84
3.4.2 5ACCIF01.FPCS-000............................................................................................................................ 92
3.4.3 5ACCIF01.FPLK-000.............................................................................................................................99
3.4.4 5ACCIF01.FPLS-000...........................................................................................................................104
3.4.5 5ACCIF01.FPLS-001...........................................................................................................................109
3.4.6 5ACCIF01.FPSC-000.......................................................................................................................... 114
3.4.7 5ACCIF01.FPSC-001.......................................................................................................................... 120
3.4.8 5ACCIF01.ICAN-000........................................................................................................................... 127
3.5 Handles.....................................................................................................................................................130
3.5.1 5AC903.HDL0-0x................................................................................................................................ 130
Chapter 3 Commissioning.......................................................................................131
1 Installation...................................................................................................................................................... 131
1.1 Panel PC 2100 - Installation.................................................................................................................... 131
1.2 Separate delivery of components.............................................................................................................133
1.3 Removing the interface cover.................................................................................................................. 134
1.4 Connecting the cables..............................................................................................................................135
1.5 Replacing a system unit...........................................................................................................................136
1.6 Installing the handles................................................................................................................................138
2 Connecting to the power grid........................................................................................................................ 139
2.1 Installing the DC power cable.................................................................................................................. 139
2.1.1 Wiring.................................................................................................................................................. 139
2.2 Connecting the power supply to a B&R device....................................................................................... 140
2.3 Grounding concept - Functional ground...................................................................................................140
3 Cable connections..........................................................................................................................................142
4 Switching on the device for the first time...................................................................................................... 143
4.1 General information before switching on the device................................................................................143
4.2 Switching on the device........................................................................................................................... 143
5 Touch screen calibration................................................................................................................................ 144
5.1 Single-touch (analog resistive)................................................................................................................. 144
5.1.1 Windows 10 IoT Enterprise 2015 LTSB............................................................................................. 144
5.1.2 Windows Embedded 8.1 Industry Pro................................................................................................ 144
5.1.3 Windows 7 Professional / Ultimate.....................................................................................................144
5.1.4 Windows Embedded Standard 7 Embedded / Premium.................................................................... 144
5.2 Multi-touch (projected capacitive - PCT)..................................................................................................144
5.2.1 Windows 10 IoT Enterprise 2015 LTSB............................................................................................. 144

Table of contents
Table of contents
Panel PC 2100 swing arm user's manual V1.12 5
5.2.2 Windows Embedded 8.1 Industry Pro................................................................................................ 144
5.2.3 Windows 7 Professional / Ultimate.....................................................................................................144
5.2.4 Windows Embedded Standard 7 Premium.........................................................................................144
6 Adjusting the display brightness.................................................................................................................... 145
7 General instructions for performing temperature testing............................................................................... 146
7.1 Procedure................................................................................................................................................. 146
7.2 Evaluating temperatures in Windows operating systems........................................................................ 146
7.2.1 Evaluating with the B&R Control Center............................................................................................ 146
7.2.2 Evaluating with the BurnInTest tool from PassMark...........................................................................147
7.3 Evaluating temperatures in non-Windows operating systems................................................................. 149
7.4 Evaluating the measurement results........................................................................................................149
8 Known problems / Issues.............................................................................................................................. 150
Chapter 4 Software.................................................................................................. 151
1 BIOS options.................................................................................................................................................. 151
1.1 General information.................................................................................................................................. 151
1.2 BIOS Setup and boot procedure..............................................................................................................151
1.3 BIOS default settings................................................................................................................................151
1.4 BIOS Setup keys......................................................................................................................................152
1.5 Main.......................................................................................................................................................... 153
1.5.1 System information............................................................................................................................. 154
1.6 Advanced.................................................................................................................................................. 155
1.6.1 OEM features......................................................................................................................................156
1.6.2 CPU configuration............................................................................................................................... 168
1.6.3 Graphics (IGD) configuration.............................................................................................................. 170
1.6.4 LAN......................................................................................................................................................172
1.6.5 PCI express configuration...................................................................................................................173
1.6.6 USB configuration............................................................................................................................... 175
1.6.7 SATA configuration............................................................................................................................. 176
1.6.8 Miscellaneous configuration................................................................................................................177
1.6.9 Thermal configuration......................................................................................................................... 178
1.7 Security..................................................................................................................................................... 179
1.8 Boot...........................................................................................................................................................180
1.8.1 Boot device priority............................................................................................................................. 181
1.8.2 Boot configuration............................................................................................................................... 182
1.9 Exit............................................................................................................................................................ 184
1.10 Allocation of resources...........................................................................................................................185
1.10.1 RAM address assignments...............................................................................................................185
1.10.2 I/O address assignments.................................................................................................................. 185
1.10.3 Interrupt assignments in PIC mode.................................................................................................. 185
1.10.4 Interrupt assignments in APIC mode................................................................................................186
2 Upgrade information.......................................................................................................................................187
2.1 BIOS upgrade...........................................................................................................................................187
2.1.1 Important information.......................................................................................................................... 187
2.1.2 Procedure in EFI shell........................................................................................................................ 188
2.2 Upgrading the firmware on the Panel PC 2100.......................................................................................189
2.2.1 Procedure in Windows (B&R Control Center).................................................................................... 189
2.2.2 Procedure in EFI shell........................................................................................................................ 189
3 Multi-touch drivers..........................................................................................................................................190
4 Windows 10 IoT Enterprise 2015 LTSB........................................................................................................ 191
4.1 General information.................................................................................................................................. 191
4.2 PPC2100 - Order data............................................................................................................................. 191
4.3 Overview................................................................................................................................................... 191
4.4 Features with Windows 10 IoT Enterprise 2015 LTSB............................................................................ 191
4.5 Installation.................................................................................................................................................191
4.6 Drivers.......................................................................................................................................................191
4.7 Activation.................................................................................................................................................. 192

Table of contents
6 Panel PC 2100 swing arm user's manual V1.12
4.8 Contents of the Recovery DVD................................................................................................................192
4.9 Special considerations, limitations........................................................................................................... 193
4.10 Supported display resolutions................................................................................................................ 193
5 Windows Embedded 8.1 Industry Pro........................................................................................................... 194
5.1 General information.................................................................................................................................. 194
5.2 Order data................................................................................................................................................ 194
5.3 Overview................................................................................................................................................... 194
5.4 Features with Windows Embedded 8.1 Industry Pro...............................................................................194
5.5 Installation.................................................................................................................................................195
5.6 Drivers.......................................................................................................................................................195
5.7 Activation.................................................................................................................................................. 195
5.8 Contents of the Recovery DVD................................................................................................................196
5.9 Lockdown features................................................................................................................................... 196
5.10 Supported display resolutions................................................................................................................ 196
6 Windows 7......................................................................................................................................................197
6.1 General information.................................................................................................................................. 197
6.2 Order data................................................................................................................................................ 197
6.3 Overview................................................................................................................................................... 198
6.4 Installation.................................................................................................................................................198
6.5 Drivers.......................................................................................................................................................198
6.6 Special considerations, limitations........................................................................................................... 198
6.7 Supported display resolutions.................................................................................................................. 199
7 Windows Embedded Standard 7................................................................................................................... 200
7.1 General information.................................................................................................................................. 200
7.2 Order data................................................................................................................................................ 200
7.3 Overview................................................................................................................................................... 200
7.4 Features with WES7 (Windows Embedded Standard 7)......................................................................... 200
7.5 Installation.................................................................................................................................................201
7.6 Drivers.......................................................................................................................................................201
7.7 Special considerations, limitations........................................................................................................... 201
7.8 Supported display resolutions.................................................................................................................. 201
8 Automation Runtime.......................................................................................................................................202
8.1 General information.................................................................................................................................. 202
8.2 Order data................................................................................................................................................ 202
8.3 Automation Runtime Windows (ARwin)................................................................................................... 202
8.4 Automation Runtime Embedded (ARemb)...............................................................................................203
8.5 Technology Guarding............................................................................................................................... 203
9 Debian (GNU/Linux).......................................................................................................................................204
9.1 General information.................................................................................................................................. 204
9.2 Order data................................................................................................................................................ 204
9.3 Overview................................................................................................................................................... 204
9.4 Features....................................................................................................................................................204
9.5 Installation.................................................................................................................................................204
9.6 Drivers.......................................................................................................................................................205
10 B&R Automation Device Interface (ADI) - Control Center...........................................................................206
10.1 Functions................................................................................................................................................ 206
10.2 Installation...............................................................................................................................................207
11 B&R Automation Device Interface (ADI) Development Kit.......................................................................... 208
12 B&R Automation Device Interface (ADI) .NET SDK....................................................................................210
13 B&R Key Editor............................................................................................................................................212
14 B&R KCF Editor...........................................................................................................................................214
15 HMI Service Center..................................................................................................................................... 215
15.1 5SWUTI.0001-000.................................................................................................................................. 215
15.1.1 General information...........................................................................................................................215
15.1.2 Order data.........................................................................................................................................215
16 RFID command set......................................................................................................................................216
16.1 General information................................................................................................................................ 216

Table of contents
Table of contents
Panel PC 2100 swing arm user's manual V1.12 7
16.2 MIFARE configuration.............................................................................................................................217
16.2.1 Getting started...................................................................................................................................217
16.2.2 Access rights and memory organization...........................................................................................217
16.2.3 Value block........................................................................................................................................217
16.2.4 Access rights.....................................................................................................................................218
16.2.5 General commands...........................................................................................................................218
16.2.6 Update commands............................................................................................................................ 219
16.2.7 MIFARE commands.......................................................................................................................... 219
16.2.8 MIFARE commands - Examples...................................................................................................... 219
16.3 ISO 15693 configuration.........................................................................................................................221
16.3.1 Getting started...................................................................................................................................221
16.3.2 General commands...........................................................................................................................221
16.3.3 Update commands............................................................................................................................ 221
16.3.4 ISO 15693 commands...................................................................................................................... 221
16.3.5 Memory organization.........................................................................................................................222
16.3.6 ISO 15693 commands - Examples...................................................................................................222
16.4 Flag definitions....................................................................................................................................... 224
16.5 Error messages and numbers................................................................................................................225
16.6 Updating firmware.................................................................................................................................. 228
Chapter 5 Standards and certifications................................................................. 229
1 Standards and guidelines.............................................................................................................................. 229
1.1 CE marking...............................................................................................................................................229
1.2 EMC directive........................................................................................................................................... 229
2 Certifications...................................................................................................................................................230
2.1 UL certification..........................................................................................................................................230
2.2 FCC and IC.............................................................................................................................................. 230
Chapter 6 Accessories............................................................................................ 232
1 Power connectors.......................................................................................................................................... 232
1.1 0TB103.9x.................................................................................................................................................232
1.1.1 General information.............................................................................................................................232
1.1.2 Order data...........................................................................................................................................232
1.1.3 Technical data.....................................................................................................................................232
2 Terminal block for the button/switch interface...............................................................................................234
2.1 0TB1210.3100.......................................................................................................................................... 234
2.1.1 General information.............................................................................................................................234
2.1.2 Order data...........................................................................................................................................234
2.1.3 Technical data.....................................................................................................................................234
3 USB flash drives............................................................................................................................................ 235
3.1 5MMUSB.xxxx-01..................................................................................................................................... 235
3.1.1 General information.............................................................................................................................235
3.1.2 Order data...........................................................................................................................................235
3.1.3 Technical data.....................................................................................................................................235
3.1.4 Temperature/Humidity diagram...........................................................................................................236
3.2 5MMUSB.032G-02....................................................................................................................................236
3.2.1 General information.............................................................................................................................236
3.2.2 Order data...........................................................................................................................................237
3.2.3 Technical data.....................................................................................................................................237
3.2.4 Temperature/Humidity diagram...........................................................................................................238
Chapter 7 Maintenance and servicing................................................................... 239
1 Cleaning......................................................................................................................................................... 239
2 Tips for extending the service life of the display........................................................................................... 240
2.1 Backlight................................................................................................................................................... 240
2.1.1 How can the service life of the backlight be extended?.....................................................................240
2.2 Screen burn-in.......................................................................................................................................... 240

Table of contents
8 Panel PC 2100 swing arm user's manual V1.12
2.2.1 What causes screen burn-in?.............................................................................................................240
2.2.2 How can screen burn-in be avoided?.................................................................................................240
3 Pixel errors..................................................................................................................................................... 240
Appendix A .............................................................................................................. 241
1 Maintenance Controller Extended (MTCX)....................................................................................................241
2 Abbreviations..................................................................................................................................................241
3 Viewing angles............................................................................................................................................... 241
4 Chemical resistance.......................................................................................................................................243
4.1 Autotex panel overlay (polyester).............................................................................................................244
4.2 Aluminum panel overlay...........................................................................................................................245
4.3 Coated aluminum front.............................................................................................................................245
4.4 Touch screen............................................................................................................................................ 246
5 Features......................................................................................................................................................... 247
5.1 RFID read/write transponder unit.............................................................................................................247
5.2 Pushbutton RAFIX 22 FS+, 1.30.270.021/2300.......................................................................................247
5.3 Pushbutton RAFIX 22 FS+, 1.30.270.021/2500.......................................................................................247
5.4 Selector switch RAFIX 22 FS+, 1.30.272.102/2200................................................................................ 248
5.5 Key switch RAFIX 22 FS+, 1.30.255.222/0000....................................................................................... 248
5.6 Emergency stop RAFIX 22 FS+ "Plus 1", 1.30.273.502/0300.................................................................248
5.7 Switching element RAFIX 22 FS universal, 1.20.126.005/0000.............................................................. 249
5.8 Switching element RAFIX 22 FS+ PCB gold, 1.20.126.414/0000........................................................... 249
6 Touch screen..................................................................................................................................................250
6.1 5-wire AMT touch screen (single-touch).................................................................................................. 250
6.1.1 Technical data.....................................................................................................................................250
6.1.2 Temperature/Humidity diagram...........................................................................................................250
6.2 3M touch screen (multi-touch generation 2)............................................................................................ 251
6.2.1 General information.............................................................................................................................251
6.2.2 Technical data.....................................................................................................................................251
6.2.3 Temperature/Humidity diagram...........................................................................................................251
6.3 3M touch screen (multi-touch generation 3)............................................................................................ 252
6.3.1 General information.............................................................................................................................252
6.3.2 Technical data.....................................................................................................................................252
6.3.3 Temperature/Humidity diagram...........................................................................................................252

General information • Manual history
Chapter 1
General information
Panel PC 2100 swing arm user's manual V1.12 9
Chapter 1 • General information
Information:
This user's manual is not intended for end customers! It is the responsibility of the machine manufac-
turer or system provider to provide the safety guidelines relevant to end customers in the operating
instructions for the end customer in the respective local language.
1 Manual history
Version Date Change
0.10 PRELIMINARY 2015-01-29 •First version
1.00 2015-03-26 •Updated max. cable length for USB 2.0, see "USB interfaces" on page 40.
•Updated symbolic representation for separate ordering of handles, see 2.1.1 "Dimensions" on page 20.
•Revised section "Replacing a system unit" on page 136.
•Revised section "Installing the handles" on page 138.
•Revised section "Switching on the device" on page 143.
•Updated section "Minimum ambient temperature for worst-case operation" on page 26.
•Updated section "Maximum ambient temperature for worst-case operation" on page 25.
1.01 2015-04-02 •Updated "Ethernet 1 interface (ETH1)" and "Ethernet 2 interface (ETH2)" on page 39.
•Revised section "Temperature sensor locations" on page 28.
•Revised section "Front USB interface" on page 47.
•Updated technical data for the following CFast cards: "5CFAST.xxxx-00" on page 76 and
"5CFAST.xxxx-10" on page 79.
1.02 2015-04-17 •Updated max. specified temperature of display units, see "Temperature sensor locations" on page 28.
•Updated section "Maximum ambient temperature for worst-case operation" on page 25.
1.05 2015-11-27 •Updated technical data for "Panels" on page 49.
•Updated interface options "5ACCIF01.FPLS-001" on page 109, "5ACCIF01.FPSC-001" on page 120
and "5ACCIF01.ICAN-000" on page 127.
•Documented exact position of key/switch interface, see "Button/Switch interface" on page 48.
•Changed wording of "keys" to "buttons" and "display units with keys" to "display units with operating
elements".
•Updated Ambient temperature for storage and transport.
•Modified section "Protection" on page 29.
•Updated the BIOS to V1.23, see "BIOS options" on page 151.
•Updated section "Upgrade information" on page 187.
•Updated "HMI Service Center" on page 215 (5SWUTI.0001-000).
•Updated "B&R KCF Editor" on page 214.
•Updated "B&R Key Editor" on page 212.
•Revised overview of "Windows Embedded 8.1 Industry Pro", "Windows 7" and "Windows Embedded
Standard 7".
•Updated Debian 8 section, see "Debian (GNU/Linux)" on page 204.
•Updated Technology Guard (HID) 0TG1000.02 and Automation Runtime Embedded Terminal TG
1TG4601.06-T, see "Automation Runtime" on page 202.
•Updated "RFID read/write transponder unit" on page 247.
1.10 2016-05-09 •Updated interface options "5ACCIF01.FPCC-000" on page 84 and "5ACCIF01.FPLK-000" on page
99.
•Updated color of Ethernet connector LEDs, see "Ethernet 1 interface (ETH1)" on page 39 and "Ethernet
2 interface (ETH2)" on page 39.
•Updated section "Panel PC 2100 - Installation" on page 131.
•Updated chapter 5 "Standards and certifications".
•Updated section "General instructions for performing temperature testing" on page 146 in chapter 3
"Commissioning".
•Updated "Windows 10 IoT Enterprise 2015 LTSB" on page 191.
•Updated section "Multi-touch drivers" on page 190.
•Updated section "+24 VDC power supply" on page 31.
Table 1: Manual history

General information • Manual history
10 Panel PC 2100 swing arm user's manual V1.12
Version Date Change
1.12 2017-03-27 •Updated section "Touch screen" with "3M touch screen (multi-touch generation 2)" on page 251 and
"3M touch screen (multi-touch generation 3)" on page 252.
•Updated Ethernet interface option "5ACCIF01.FPCS-000" on page 92.
•Updated section "Temperature monitoring" on page 27.
•Updated "Technical data" for display units.
•Updated section "Multi-touch drivers" on page 190.
Table 1: Manual history

General information • Safety guidelines
Chapter 1
General information
Panel PC 2100 swing arm user's manual V1.12 11
2 Safety guidelines
2.1 Intended use
Programmable logic controllers (PLCs), operating/monitoring devices (industrial PCs, Power Panels, Mobile Pan-
els, etc.) and B&R uninterruptible power supplies have been designed, developed and manufactured for conven-
tional use in industrial environments. They were not designed, developed and manufactured for any use involving
serious risks or hazards that could lead to death, injury, serious physical damage or loss of any kind without the
implementation of exceptionally stringent safety precautions. In particular, such risks and hazards include the use
of these devices to monitor nuclear reactions in nuclear power plants, their use in flight control or flight safety sys-
tems as well as in the control of mass transportation systems, medical life support systems or weapons systems.
2.2 Protection against electrostatic discharge
Electrical components that can be damaged by electrostatic discharge (ESD) must be handled accordingly.
2.2.1 Packaging
•Electrical components with a housing
...do not require special ESD packaging but must be handled properly (see "Electrical components with
a housing").
•Electrical components without a housing
…are protected by ESD-suitable packaging.
2.2.2 Guidelines for proper ESD handling
Electrical components with a housing
•Do not touch the connector contacts on connected cables.
•Do not touch the contact tips on circuit boards.
Electrical components without a housing
The following points apply in addition to the points listed under "Electrical components with a housing":
•Any persons handling electrical components or devices with installed electrical components must be
grounded.
•Components are only permitted to be touched on their narrow sides or front plate.
•Components should always be stored in a suitable medium (ESD packaging, conductive foam, etc.). Metal-
lic surfaces are not suitable storage surfaces!
•Components should not be subjected to electrostatic discharge (e.g. through the use of charged plastics).
•Ensure a minimum distance of 10 cm from monitors and TV sets.
•Measuring instruments and equipment must be grounded.
•Probes on potential-free measuring instruments must be discharged on sufficiently grounded surfaces be-
fore taking measurements.
Individual components
•ESD protective measures for individual components are thoroughly integrated at B&R (conductive floors,
footwear, arm bands, etc.).
•These increased ESD protective measures for individual components are not necessary for customers
handling B&R products.
2.3 Policies and procedures
Electronic devices are never completely failsafe. If the programmable control system, operating/monitoring device
or uninterruptible power supply fails, the user is responsible for ensuring that other connected devices, e.g. motors,
are brought to a secure state.

General information • Safety guidelines
12 Panel PC 2100 swing arm user's manual V1.12
When using programmable logic controllers or operating/monitoring devices as control systems together with a soft
PLC (e.g. B&R Automation Runtime or comparable product) or slot PLC (e.g. B&R LS251 or comparable product),
safety precautions relevant to industrial control systems (e.g. the provision of safety devices such as emergency
stop, etc.) must be observed in accordance with applicable national and international regulations. The same applies
for all other devices connected to the system, such as drives.
All tasks such as the installation, commissioning and servicing of devices are only permitted to be carried out by
qualified personnel. Qualified personnel are those familiar with the transport, mounting, installation, commissioning
and operation of devices who also have the appropriate qualifications (e.g. IEC 60364). National accident preven-
tion regulations must be observed.
The safety notices, information on connection conditions (type plate and documentation) and limit values specified
in the technical data are to be read carefully before installation and commissioning and must always be observed.
2.4 Transport and storage
During transport and storage, devices must be protected against undue stress (mechanical loads, temperature,
moisture, corrosive atmospheres, etc.).
2.5 Installation
•These devices are not ready for use upon delivery and must be installed and wired according to the spec-
ifications in this documentation in order for the EMC limit values to apply.
•Installation must be performed according to this documentation using suitable equipment and tools.
•Devices are only permitted to be installed by qualified personnel without voltage applied. Before installation,
voltage to the control cabinet must be switched off and prevented from being switched on again.
•General safety guidelines and national accident prevention regulations must be observed.
•Electrical installation must be carried out in accordance with applicable guidelines (e.g. line cross sections,
fuses, protective ground connections).
2.6 Operation
2.6.1 Protection against touching electrical parts
To operate programmable logic controllers, operating and monitoring devices, and uninterruptible power supplies,
certain components must carry dangerous voltage levels over 42 VDC. Touching one of these parts can result in
a life-threatening electric shock. Failure to do so could lead to death, severe injury or damage to property.
Before turning on the programmable logic controller, operating/monitoring devices or uninterruptible power supply,
the housing must be properly grounded (PE rail). Ground connections must be established even when testing or
operating the operating/monitoring device or uninterruptible power supply for a short time!
Before switching on the device, all parts that carry voltage must be securely covered. During operation, all covers
must remain closed.
2.6.2 Environmental conditions - Dust, moisture, corrosive gases
The use of operating/monitoring devices (e.g. industrial PCs, Power Panels, Mobile Panels, etc.) and uninterruptible
power supplies in very dusty environments should be avoided. Dust collection on the devices can affect functionality
and may prevent sufficient cooling, especially in systems with active cooling systems (fans).
The presence of corrosive gases can also lead to malfunctions. When combined with high temperature and hu-
midity, corrosive gases – e.g. with sulfur, nitrogen and chlorine components – can induce chemical reactions that
can damage electronic components very quickly. Signs of the presence of corrosive gases are blackened copper
surfaces and cable ends on existing equipment.
For operation in dusty or moist conditions, correctly installed (e.g. cutout installations) operating/monitoring devices
like the Automation Panel or Power Panel are protected on the front. The back of all devices must be protected
from dust and moisture and cleaned at suitable intervals.
2.6.3 Viruses and dangerous programs
This system is subject to potential risk each time data is exchanged or software is installed from a data medium
(e.g. diskette, CD-ROM, USB flash drive, etc.), a network connection or the Internet. The user is responsible for
assessing these dangers, implementing preventive measures such as virus protection programs, firewalls, etc. and
making sure that software is only obtained from trusted sources.

General information • Safety guidelines
Chapter 1
General information
Panel PC 2100 swing arm user's manual V1.12 13
2.7 Environmentally friendly disposal
All B&R programmable controllers, operating/monitoring devices and uninterruptible power supplies are designed
to inflict as little harm as possible on the environment.
2.7.1 Separation of materials
It is necessary to separate different materials so the device can undergo an environmentally friendly recycling
process.
Component Disposal
Programmable logic controllers
Operating/Monitoring devices
Uninterruptible power supply
Batteries and rechargeable batteries
Cables
Electronics recycling
Cardboard box / Paper packaging Cardboard box / Paper recycling
Plastic packaging Plastic recycling
Table 2: Environmentally friendly disposal
Disposal must comply with applicable legal regulations.

General information • Guidelines
14 Panel PC 2100 swing arm user's manual V1.12
3 Organization of safety notices
Safety notices in this manual are organized as follows:
Safety notice Description
Danger! Disregarding these safety guidelines and notices can be life-threatening.
Warning! Disregarding these safety guidelines and notices can result in severe injury or substantial damage to property.
Caution! Disregarding these safety guidelines and notices can result in injury or damage to property.
Information: This information is important for preventing errors.
Table 3: Description of the safety notices used in this documentation
4 Guidelines
E
European dimension standards apply to all dimension diagrams in this document.
All dimensions are specified in mm.
Unless otherwise specified, the following general tolerances apply:
Range of nominal sizes General tolerance according to
DIN ISO 2768 (medium)
Up to 6 mm ±0.1 mm
For 6 to 30 mm ±0.2 mm
For 30 to 120 mm ±0.3 mm
For 120 to 400 mm ±0.5 mm
For 400 to 1000 mm ±0.8 mm
Table 4: Range of nominal sizes

General information • Overview
Chapter 1
General information
Panel PC 2100 swing arm user's manual V1.12 15
5 Overview
Model number Short description Page
Accessories
0TB103.9 Connector 24 VDC - 3-pin female - Screw clamp terminal block 3.31 mm² 232
0TB103.91 Connector 24 VDC - 3-pin female - Cage clamp terminal block 3.31 mm² 232
5SWUTI.0001-000 HMI Service Center USB Flash Drive - Hardware diagnostics software - For APC810/PPC800 - For APC910/
PPC900 - For APC2100/PPC2100 - For APC51x/PP500 - For Automation Panel 800/900
215
CFast cards
5CFAST.016G-00 CFast card, 16 GB SLC 76
5CFAST.032G-00 CFast card, 32 GB SLC 76
5CFAST.2048-00 CFast card, 2 GB SLC 76
5CFAST.4096-00 CFast card, 4 GB SLC 76
5CFAST.8192-00 CFast card, 8 GB SLC 76
CFast-Karten
5CFAST.032G-10 CFast card, 32 GB MLC ≤ Rev. F0 79
5CFAST.064G-10 CFast card, 64 GB MLC ≤ Rev. D0 79
5CFAST.128G-10 CFast card, 128 GB MLC ≤ Rev. D0 79
Debian 8
5SWLIN.0543-MUL Debian 8 - 32-bit - Multilingual - PPC2100 Bay Trail chipset - Installation (without Recovery DVD) - Only available
with a new device
204
5SWLIN.0643-MUL Debian 8 - 64-bit - Multilingual - PPC2100 Bay Trail chipset - Installation (without Recovery DVD) - Only available
with a new device
204
Display units
5AP92D.1505-00 Automation Panel 15.0" XGA TFT - 1024 x 768 pixels (4:3) - Single-touch (analog resistive) - Landscape format
- IP65 protection - For swing arm mounting - Flange on the top
49
5AP92D.1505-01 Automation Panel 15.0" XGA TFT - 1024 x 768 pixels (4:3) - Single-touch (analog resistive) - Landscape format
- IP65 protection - For swing arm mounting - Flange on the bottom
49
5AP92D.1906-00 Automation Panel 19.0" SXGA TFT - 1280 x 1024 pixels (5:4) - Single-touch (analog resistive) - Landscape
format - IP65 protection - For swing arm mounting - Flange on the top
51
5AP92D.1906-01 Automation Panel 19.0" SXGA TFT - 1280 x 1024 pixels (5:4) - Single-touch (analog resistive) - Landscape
format - IP65 protection - For swing arm mounting - Flange on the bottom
51
5AP93D.185B-00 Automation Panel 18.5" HD TFT - 1366 x 768 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - IP65 protection - For swing arm mounting - Flange on the top
53
5AP93D.185B-01 Automation Panel 18.5" HD TFT - 1366 x 768 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - IP65 protection - For swing arm mounting - Flange on the bottom
53
5AP93D.215C-00 Automation Panel 21.5" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - IP65 protection - For swing arm mounting - Flange on the top
55
5AP93D.215C-01 Automation Panel 21.5" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - IP65 protection - For swing arm mounting - Flange on the bottom
55
5AP93D.240C-00 Automation Panel 24.0" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - IP65 protection - For swing arm mounting - Flange on the top
57
5AP93D.240C-01 Automation Panel 24.0" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - IP65 protection - For swing arm mounting - Flange on the bottom
57
5AP99D.185B-00 Automation Panel 18.5" HD TFT - 1366 x 768 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - 2 pushbuttons - RFID read/write unit - E-stop - Selector switch - Key switch - IP65 protection - For
swing arm mounting - Flange on the top
59
5AP99D.185B-01 Automation Panel 18.5" HD TFT - 1366 x 768 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - 2 pushbuttons - RFID read/write unit - E-stop - Selector switch - Key switch - IP65 protection - For
swing arm mounting - Flange on the bottom
59
5AP99D.215C-00 Automation Panel 21.5" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - 2 pushbuttons - RFID read/write unit - E-stop - Selector switch - Key switch - IP65 protection - For
swing arm mounting - Flange on the top
62
5AP99D.215C-01 Automation Panel 21.5" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - 2 pushbuttons - RFID read/write unit - E-stop - Selector switch - Key switch - IP65 protection - For
swing arm mounting - Flange on the bottom
62
5AP99D.215I-00 Automation Panel 21.5" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Portrait
format - 2 pushbuttons - RFID read/write unit - E-stop - Key switch - IP65 protection - For swing arm mounting
- Flange on the top
65
5AP99D.215I-01 Automation Panel 21.5" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Portrait
format - 2 pushbuttons - RFID read/write unit - E-stop - Key switch - IP65 protection - For swing arm mounting
- Flange on the bottom
65
5AP99D.240C-00 Automation Panel 24.0" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - 2 pushbuttons - RFID read/write unit - E-stop - Selector switch - Key switch - IP65 protection - For
swing arm mounting - Flange on the top
68
5AP99D.240C-01 Automation Panel 24.0" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Landscape
format - 2 pushbuttons - RFID read/write unit - E-stop - Selector switch - Key switch - IP65 protection - For
swing arm mounting - Flange on the bottom
68
Handles
5AC903.HDL0-00 Handles for 5AP92D.1505-00, 5AP92D.1505-01 130
5AC903.HDL0-01 Handles for 5AP92D.1906-00, 5AP92D.1906-01 130
5AC903.HDL0-02 Handles for 5AP93D.185B-00, 5AP93D.185B-01 130
5AC903.HDL0-03 Handles for 5AP93D.215C-00, 5AP93D.215C-01 130
5AC903.HDL0-04 Handles for 5AP93D.240C-00, 5AP93D.240C-01 130
5AC903.HDL0-05 Handles for 5AP99D.185B-00, 5AP99D.185B-01 130
5AC903.HDL0-06 Handles for 5AP99D.215C-00, 5AP99D.215C-01 130
5AC903.HDL0-07 Handles for 5AP99D.215I-00, 5AP99D.215I-01 130
5AC903.HDL0-08 Handles for 5AP99D.240C-00, 5AP99D.240C-01 130

General information • Overview
16 Panel PC 2100 swing arm user's manual V1.12
Model number Short description Page
Interface options
5ACCIF01.FPCC-000 Interface card - 2x CAN interfaces - 1x X2X Link interface - 1x POWERLINK interface - 512 kB nvSRAM - For
APC2100/PPC2100 - Only available with a new device
84
5ACCIF01.FPCS-000 Interface card - 1x RS485 interface - 1x CAN interface - 1x POWERLINK interface - 32 kB FRAM - For APC2100/
PPC2100 - Only available with a new device
92
5ACCIF01.FPLK-000 Interface card - 1x POWERLINK interface - 512 kB nvSRAM - Integrated 2-port hub - For APC2100/PPC2100
- Only available with a new device
99
5ACCIF01.FPLS-000 Interface card - 1x RS232 interface - 1x POWERLINK interface - 32 kB FRAM - For APC2100/PPC2100 - Only
available with a new device
104
5ACCIF01.FPLS-001 Interface card - 1x RS232 interface - 1x POWERLINK interface - 512 kB nvSRAM - For APC2100/PPC2100
- Only available with a new device
109
5ACCIF01.FPSC-000 Interface card - 1x RS232 interface - 1x CAN interface - 1x POWERLINK interface - 32 kB FRAM - For APC2100/
PPC2100 - Only available with a new device
114
5ACCIF01.FPSC-001 Interface card - 1x RS232 interface - 1x CAN interface - 1x X2X Link interface - 1x POWERLINK interface - 512
kB nvSRAM - For APC2100/PPC2100 - Only available with a new device
120
5ACCIF01.ICAN-000 Interface card - 1x CAN interface - For APC2100/PPC2100 127
System units
5PPC2100.BY01-001 Panel PC 2100 - Intel Atom E3815 1.46 GHz - Single core - 1 GB SDRAM - For Automation Panel swing arm
devices
71
5PPC2100.BY11-001 Panel PC 2100 - Intel Atom E3825 1.33 GHz - Dual core - 1 GB SDRAM - For Automation Panel swing arm
devices
71
5PPC2100.BY22-001 Panel PC 2100 - Intel Atom E3826 1.46 GHz - Dual core - 2 GB SDRAM - For Automation Panel swing arm
devices
71
5PPC2100.BY34-001 Panel PC 2100 - Intel Atom E3827 1.75 GHz - Dual core - 4 GB SDRAM - For Automation Panel swing arm
devices
71
5PPC2100.BY44-001 Panel PC 2100 - Intel Atom E3845 1.91 GHz - Dual core - 4 GB SDRAM - For Automation Panel swing arm
devices
71
Technology Guard
0TG1000.01 Technology Guard (MSD) 202
0TG1000.02 Technology Guard (HID) 202
1TG4600.10-5 Automation Runtime Windows, TG license 202
1TG4601.06-5 Automation Runtime Embedded, TG license 202
1TG4601.06-T Automation Runtime Embedded Terminal TG license 202
Terminal blocks
0TB1210.3100 Connector 300 VDC - 10-pin female - Cage clamp terminal block - Protected against vibration by the screw
flange
234
USB accessories
5MMUSB.032G-02 USB 3.0 flash drive 32 GB MLC 237
5MMUSB.2048-01 USB 2.0 flash drive 2048 MB B&R 235
5MMUSB.4096-01 USB 2.0 flash drive 4096 MB B&R 235
Windows 10 IoT Enterprise
5SWW10.0243-MUL Windows 10 IoT Enterprise 2015 LTSB - 64-bit - Multilingual - PPC2100 Bay Trail chipset - License (without
Recovery DVD) - Only available with a new device
191
Windows 7 Professional/Ultimate
5SWWI7.1100-ENG Windows 7 Professional SP1 - 32-bit - English - DVD 197
5SWWI7.1100-GER Windows 7 Professional SP1 - 32-bit - German - DVD 197
5SWWI7.1200-ENG Windows 7 Professional SP1 - 64-bit - English - DVD 197
5SWWI7.1200-GER Windows 7 Professional SP1 - 64-bit - German - DVD 197
5SWWI7.1300-MUL Windows 7 Ultimate SP1 - 32-bit - Multilingual - DVD 197
5SWWI7.1400-MUL Windows 7 Ultimate SP1 - 64-bit - Multilingual - DVD 197
Windows Embedded 8.1 Industry Professional
5SWWI8.0343-MUL Windows Embedded 8.1 Industry Pro - 32-bit - Multilingual - For PPC2100 - License 194
5SWWI8.0443-MUL Windows Embedded 8.1 Industry Pro - 64-bit - Multilingual - For PPC2100 - License 194
Windows Embedded Standard 7
5SWWI7.1543-ENG Windows Embedded Standard 7 SP1 - 32-bit - Service Pack 1 - English - PPC2100 - License (without Recovery
DVD) - Only available with a new device
200
5SWWI7.1643-ENG Windows Embedded Standard 7 SP1 - 64-bit - Service Pack 1 - English - PPC2100 - License (without Recovery
DVD) - Only available with a new device
200
5SWWI7.1743-MUL Windows Embedded Standard 7 Premium SP1 - 32-bit - Service Pack 1 - English - PPC2100 - License (without
Recovery DVD) - Only available with a new device
200
5SWWI7.1843-MUL Windows Embedded Standard 7 Premium SP1 - 64-bit - Service Pack 1 - English - PPC2100 - License (without
Recovery DVD) - Only available with a new device
200

Technical data • Introduction
Chapter 2
Technical data
Panel PC 2100 swing arm user's manual V1.12 17
Chapter 2 • Technical data
1 Introduction
1.1 About this user's manual
This user's manual contains all relevant information about an operational Panel PC 2100 swing arm device.
1.2 Description of individual modules
1.2.1 Display units
Display units are the basis for every Automation Panel 9xD and Panel PC 2100 swing arm device. They consist
of a display, touch screen and housing. A variety of display sizes, touch screen technologies, flange connections
(top or bottom) and displays with operating elements are available. These display units can only be operated as
a complete system together with a link module (Automation Panel 9xD) or CPU board and system unit (Panel PC
2100 swing arm device).
Single-touch display units start at model number 5AP92D.xxxx-xx, multi-touch display units start at 5AP93D.xxxx-
xx and multi-touch display units with operating elements start at 5AP99D.xxxx-xx.
1.2.2 System units
System units consist of a CPU board and aluminum housing. They include all of the interfaces and main memory
on PPC2100 swing arm devices in addition to interface option and CFast card connections. Main memory is per-
manently built into the system unit and cannot be replaced.
An operational Panel PC is put together by installing a system unit on a display unit. The Panel PC 2100 is installed
on a swing arm system using the attached flange.
A system unit cannot function without a display unit.

Technical data • Introduction
18 Panel PC 2100 swing arm user's manual V1.12
1.3 System components / Configuration
1.3.1 Configuration
The following components are required for operation as a Panel PC 2100 swing arm device:
•Display unit
•System unit
•CFast card for the operating system
•Operating system
System unit Processor - Type Processor - Clock frequency Processor - Cores Main memory - Type Main memory - Size
5PPC2100.BY01-001 Intel Atom E3815 1460 MHz 1 DDR3 SDRAM 1 GB
5PPC2100.BY11-001 Intel Atom E3825 1330 MHz 2 DDR3 SDRAM 1 GB
5PPC2100.BY22-001 Intel Atom E3826 1460 MHz 2 DDR3 SDRAM 2 GB
5PPC2100.BY34-001 Intel Atom E3827 1750 MHz 2 DDR3 SDRAM 4 GB
5PPC2100.BY44-001 Intel Atom E3845 1910 MHz 4 DDR3 SDRAM 4 GB

Technical data • Introduction
Chapter 2
Technical data
Panel PC 2100 swing arm user's manual V1.12 19
5 A C 9 0 3 . H D L 0 - 0 0 - F o r 5 A P 9 2 D . 1 5 0 5 - 0 0 / - 0 1
5 A C 9 0 3 . H D L 0 - 0 1 - F o r 5 A P 9 2 D . 1 9 0 6 - 0 0 / - 0 1
5 A C 9 0 3 . H D L 0 - 0 2 - F o r 5 A P 9 3 D . 1 8 5 B - 0 0 / - 0 1
5 A C 9 0 3 . H D L 0 - 0 3 - F o r 5 A P 9 3 D . 2 1 5 C - 0 0 / - 0 1
5 A C 9 0 3 . H D L 0 - 0 4 - F o r 5 A P 9 3 D . 2 4 0 C - 0 0 / - 0 1
5 A C 9 0 3 . H D L 0 - 0 5 - F o r 5 A P 9 9 D . 1 8 5 B - 0 0 / - 0 1
5 A C 9 0 3 . H D L 0 - 0 6 - F o r 5 A P 9 9 D . 2 1 5 C - 0 0 / - 0 1
5 A C 9 0 3 . H D L 0 - 0 7 - F o r 5 A P 9 9 D . 2 1 5 I - 0 0 / - 0 1
5 A C 9 0 3 . H D L 0 - 0 8 - F o r 5 A P 9 9 D . 2 4 0 C - 0 0 / - 0 1
S e l e c t 1
S e l e c t 1
1 ) H a n d l e s a r e n o t f a c t o r y - i n s t a l l e d a n d m u s t b e m o u n t e d a f t e r d e l i v e r y .
2 ) T h e t e r m i n a l b l o c k i s o p t i o n a l a n d u s e d t o m a k e t h e c o n n e c t i o n t o t h e b u t t o n / s w i t c h i n t e r f a c e .
5 P P C 2 1 0 0 . B Y 0 1 - 0 0 1
5 P P C 2 1 0 0 . B Y 1 1 - 0 0 1
5 P P C 2 1 0 0 . B Y 2 2 - 0 0 1
5 P P C 2 1 0 0 . B Y 3 4 - 0 0 1
5 P P C 2 1 0 0 . B Y 4 4 - 0 0 1
S e l e c t 1
S e l e c t 1
S e l e c t 1
C F a s t c a r d s
S e l e c t 1 o r 2
T e r m i n a l b l o c k s
U S B a c c e s s o r i e s
5 M M U S B . 2 0 4 8 - 0 1
5 M M U S B . 4 0 9 6 - 0 1
O p e r a t i n g s y s t e m s
5 S W W I 7 . 1 1 0 0 - E N G
5 S W W I 7 . 1 1 0 0 - G E R
5 S W W I 7 . 1 3 0 0 - M U L
5 S W W I 7 . 1 2 0 0 - E N G
5 S W W I 7 . 1 2 0 0 - G E R
5 S W W I 7 . 1 4 0 0 - M U L
W i n d o w s 7
W i n d o w s E m b e d d e d S t a n d a r d 7
5 S W W I 7 . 1 5 4 3 - E N G
5 S W W I 7 . 1 6 4 3 - E N G
5 S W W I 7 . 1 7 4 3 - M U L
5 S W W I 7 . 1 8 4 3 - M U L
S e l e c t 1
1 )
W i n d o w s E m b e d d e d 8 . 1 I n d u s t r y
5 S W W I 8 . 0 3 4 3 - M U L
5 S W W I 8 . 0 4 4 3 - M U L
5 C F A S T . 2 0 4 8 - 0 0 ≥ E 0
5 C F A S T . 4 0 9 6 - 0 0 ≥ E 0 ≥
5 C F A S T . 8 1 9 2 - 0 0 ≥ E 0 ≥
5 C F A S T . 0 1 6 G - 0 0 ≥ E 0 ≥
5 C F A S T . 0 3 2 G - 0 0 ≥ E 0 ≥
5 C F A S T . 0 3 2 G - 1 0
5 C F A S T . 0 6 4 G - 1 0
5 C F A S T . 1 2 8 G - 1 0
5 C F A S T . 2 5 6 G - 1 0
0 T B 1 0 3 . 9
0 T B 1 0 3 . 9 1
P o w e r c o n n e c t o r s
0 T B 1 2 1 0 . 3 1 0 0
T e r m i n a l b l o c k I F o p t i o n
D i s p l a y u n i t s
S y s t e m u n i t s
H a n d l e s
D e b i a n 8 ( G N U / L i n u x )
5 S W L I N . 0 5 4 3 - M U L
5 S W L I N . 0 6 4 3 - M U L
I n t e r f a c e o p t i o n s
S e l e c t 1
A u t o m a t i o n R u n t i m e
0 T G 1 0 0 0 . 0 1
0 T G 1 0 0 0 . 0 2
1 T G 4 6 0 0 . 1 0 - 5
1 T G 4 6 0 1 . 0 6 - 5
1 T G 4 6 0 1 . 0 6 - T
D i s p l a y s i z e
R e s o l u t i o n
T o u c h s c r e e n
F l a n g e
K e y s
F o r m a t
A u t o m a t i o n P a n e l 9 2 D
5 A P 9 2 D . 1 5 0 5 - 0 0
1 5 . 0 "
X G A
S i n g l e - t o u c h
T o p
N o
L a n d s c a p e
5 A P 9 2 D . 1 5 0 5 - 0 1
1 5 . 0 "
X G A
S i n g l e - t o u c h
B o t t o m
N o
L a n d s c a p e
5 A P 9 2 D . 1 9 0 6 - 0 0
1 9 . 0 "
S X G A
S i n g l e - t o u c h
T o p
N o
L a n d s c a p e
5 A P 9 2 D . 1 9 0 6 - 0 1
1 9 . 0 "
S X G A
S i n g l e - t o u c h
B o t t o m
N o
L a n d s c a p e
A u t o m a t i o n P a n e l 9 3 D
5 A P 9 3 D . 1 8 5 B - 0 0
1 8 . 5 "
H D
M u l t i - t o u c h
T o p
N o
L a n d s c a p e
5 A P 9 3 D . 1 8 5 B - 0 1
1 8 . 5 "
H D
M u l t i - t o u c h
B o t t o m
N o
L a n d s c a p e
5 A P 9 3 D . 2 1 5 C - 0 0
2 1 . 5 "
F H D
M u l t i - t o u c h
T o p
N o
L a n d s c a p e
5 A P 9 3 D . 2 1 5 C - 0 1
2 1 . 5 "
F H D
M u l t i - t o u c h
B o t t o m
N o
L a n d s c a p e
5 A P 9 3 D . 2 4 0 C - 0 0
2 4 . 0 "
F H D
M u l t i - t o u c h
T o p
N o
L a n d s c a p e
5 A P 9 3 D . 2 4 0 C - 0 1
2 4 . 0 "
F H D
M u l t i - t o u c h
B o t t o m
N o
L a n d s c a p e
A u t o m a t i o n P a n e l 9 9 D
5 A P 9 9 D . 1 8 5 B - 0 0
1 8 . 5 "
H D
M u l t i - t o u c h
T o p
Y e s
L a n d s c a p e
5 A P 9 9 D . 1 8 5 B - 0 1
1 8 . 5 "
H D
M u l t i - t o u c h
B o t t o m
Y e s
L a n d s c a p e
5 A P 9 9 D . 2 1 5 C - 0 0
2 1 . 5 "
F H D
M u l t i - t o u c h
T o p
Y e s
L a n d s c a p e
5 A P 9 9 D . 2 1 5 C - 0 1
2 1 . 5 "
F H D
M u l t i - t o u c h
B o t t o m
Y e s
L a n d s c a p e
5 A P 9 9 D . 2 1 5 I - 0 0
2 1 . 5 "
F H D
M u l t i - t o u c h
T o p
Y e s
P o r t r a i t
5 A P 9 9 D . 2 1 5 I - 0 1
2 1 . 5 "
F H D
M u l t i - t o u c h
B o t t o m
Y e s
P o r t r a i t
5 A P 9 9 D . 2 4 0 C - 0 0
2 4 . 0 "
F H D
M u l t i - t o u c h
T o p
Y e s
L a n d s c a p e
5 A P 9 9 D . 2 4 0 C - 0 1
2 4 . 0 "
F H D
M u l t i - t o u c h
B o t t o m
Y e s
L a n d s c a p e
C o n f i g u r a t i o n - B a s e s y s t e m
W i n d o w s 1 0
5 S W W 1 0 . 0 2 4 3 - M U L
5 A C C I F 0 1 . F P L S - 0 0 0
5 A C C I F 0 1 . F P L S - 0 0 1
5 A C C I F 0 1 . F P S C - 0 0 0
5 A C C I F 0 1 . F P S C - 0 0 1
5 A C C I F 0 1 . I C A N - 0 0 0
5 A C C I F 0 1 . F P C S - 0 0 0
5 A C C I F 0 1 . F P C C - 0 0 0
5 A C C I F 0 1 . F P L K - 0 0 0
Figure 1: Panel PC 2100 swing arm device - Configuration

Technical data • Complete system
20 Panel PC 2100 swing arm user's manual V1.12
2 Complete system
2.1 Mechanical characteristics
2.1.1 Dimensions
A
B
G
H I
E
F
C D
J
K
L
M
107
ø 75
ø 48.5
76 35.1
124.8
Flange
Figure 2: Panel PC 2100 swing arm device - Dimensions
All dimensions are specified in mm.
Display type Model number A B C D E F G H I J K L M
15.0" single-touch 5AP92D.1505-0x 398 316 81 235.9 24.5 61 -16 25.5 265 517.9 31.95 12 35.5
19.0" single-touch 5AP92D.1906-0x 468 386 116.8 234.4 32.5 63.5 1.6 42.8 300.3 587.9 31.95 12 43.5
18.5" multi-touch 5AP93D.185B-0x 503 323 135.7 231.5 24.5 63 -16 25.5 272 615 28 12 35.5
21.5" multi-touch 5AP93D.215C-0x 569.5 361 169 231.5 24.5 62 3 45.6 269.7 681.5 28 12 35.5
24.0" multi-touch 5AP93D.240C-0x 626.5 392 197.5 231.5 24.5 65 3 38.8 314.4 738.5 28 12 35.5
Table 5: PPC 2100 swing arm device display units - Dimensions
Information:
2D and 3D drawings (in DXF and STEP format) can be downloaded from the B&R website
(www.br-automation.com).