BANKSTON Edition Office Hook User manual

Install Instructions
Hook
Australia
14 - 16 Stepney Street,
Stepney, South Australia 5069
P: [phone]
[email protected]
bankstonarchitectural.com.au
New Zealand
P: [phone]
[email protected]
bankstonarchitectural.co.nz
SDG Trading Pty Ltd
trading as Bankston Architectural
ACN 008 154 041
ABN 18 008 154 041
Contact Us
Southern Design Group
*Image used for illustration
purposes only.
Scan for
Product &
Finish Care
Information
Scan for
New Zealand
Warranty
Scan for
Australian
Warranty

1.Installing the Hook
1.1 Mark your selected place of
installation. (Figure 1)
1.2 Remove the pencil spindle from
the hook by loosening the grub screw.
(Figure 2)
1.3 Drill appropriate sized pilot
hole for the wood screw at your
selected install point.
1.4 Fit pencil spindle using wood
screw provided. (Figure 3)
1.5 Place hook on pencil spindle and
tighten the grub screw to secure.
IMPORTANT:
Please install this hardware in the
following order to ensure its warranty
is not voided.
1. Install the hardware on raw/
unnished door using the
instructions provided.
2. Remove hardware (where possible) and
store safely. Do not place tape onto
the hardware as this will damage the
nish.
3. Paint / nish door.
4. Reinstall hardware.
Figure 1 Figure 2
(2)
(3)
Figure 3
1. Hook
2. Pencil Spindle
3.Grub
Screw
5. Allen Key
4. Wood Screw
Included Not Included