Barco EOS X Terminal User manual

User’s manual
Eos
X Terminal

Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _______________________________________________________________________ ii
DOC-3061-2, Current version
Title: EOS X Terminal – User’s Manual
ID-no.: DOC-3061-
Revision: 11
Date: November- 004
main issue update
chapter 1 add.
chapter 2
chapter 3 add.
chapter 4 add.
chapter 5
chapter 6 add.
chapter 7 add.
chapter 8
chapter 9
new: The corresponding chapters are new or completely revised.
corr.: Passages of the corresponding chapter were corrected; see modification bars.
add.: Passages of the corresponding chapter were added; see modification bars.
This manual refers to following hardware and software configurations of EOS X Terminal:
Release X Server R3.4
Document history
Modifications, which result in a new version, are indicated by a vertical bar.

Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 ______________________________________________________________________ iii
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of
their respective holders. All brand and product names mentioned in this manual serve as comments or examples
and are not to be understood as advertising for the products or their manufacturers.
Copyri ht © 1997-2004 by Barco
Die Weitergabe sowie die Vervielfältigung aller Unterlagen, die von uns überlassen werden, deren Verwertung
und Mitteilung ihres Inhaltes an Dritte ist nicht gestattet, soweit dies nicht ausdrücklich zugestanden ist.
Urheberrechte, insbesondere auch solche an Software, werden nur insoweit übertragen, als es für die Erreichung
des speziellen Vertragszwecks erforderlich ist. Zuwiderhandlungen können zu Schadensersatz verpflichten. Alle
Rechte aus der Erteilung eines Patents oder der Eintragung eines Gebrauchsmusters verbleiben bei uns.
Copyri ht © 1997-2004 by Barco
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be
recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.
Guarantee and compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee.
On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as
well as for material and manufacturing faults. Barco must be informed immediately in writing of any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on
the date of commissioning, at the latest 30 days after the transfer of risks. In the event of justified notice of
complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period.
If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase
price or cancellation of the contract (redhibition). All other claims, in particular those relating to compensation for
direct or indirect damage, and also damage attributed to the operation of software as well as to other services
provided by Barco, being a component of the system or independent services, will be deemed invalid provided
the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the intent
or gross negligence on the part of Barco.
If the purchaser or a third party carries out modifications or repairs on good delivered by Barco, or if the goods
are handled incorrectly, in particular if the systems are commissioned or operated incorrectly or if, after the
transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the
purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are attrib-
uted to programs or special electronic circuitry provided by the purchaser, e. g. interfaces. Normal wear as well
as normal maintenance are not subject to the guarantee provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations specified in this manual must
be complied with by the customer.

Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 ______________________________________________________________________ iv
Revision sheet
To:
•Barco Control Rooms mbH
An der Rossweid 5, D-76 9 Karlsruhe
Phone: [phone], Fax: [phone]
E-mail: [e-mail], Web: www.barcocontrolrooms.com
From:
Date:
Please correct the following points in this documentation (DOC-3061-2):
page wrong correct

Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _______________________________________________________________________ v
Contents
1 Introduction......................................................................................................................................... 1-1
1.1 How this manual is organized .....................................................................................................................1-
1. Styles and symbols.......................................................................................................................................1-3
1.3 Safety instructions........................................................................................................................................1-4
1.3.1 Standards .............................................................................................................................................1-4
1.3. Precautions ..........................................................................................................................................1-4
1.3.3 Unpacking of devices...........................................................................................................................1-6
1.3.4 Installation ...........................................................................................................................................1-6
1.3.5 Servicing...............................................................................................................................................1-6
1.3.6 Cleaning ...............................................................................................................................................1-6
1.3.7 Re-packing ...........................................................................................................................................1-6
1.4 Online manual ..............................................................................................................................................1-7
2 Summary ............................................................................................................................................. 2-1
.1 Properties...................................................................................................................................................... -
3 Getting started.................................................................................................................................... 3-1
3.1 Examining .....................................................................................................................................................3-
3.1.1 Eos ........................................................................................................................................................3-
3.1. Eos Extender.........................................................................................................................................3-7
3. Cabling ........................................................................................................................................................3-10
3. .1 Power supply .....................................................................................................................................3-10
3. . Mouse.................................................................................................................................................3-11
3. .3 Keyboard ............................................................................................................................................3-11
3. .4 Keyboard extension...........................................................................................................................3-1
3. .5 Graphic cards......................................................................................................................................3-14
3. .6 OmniScaler .........................................................................................................................................3-18
3. .7 Quad Analog Video Card....................................................................................................................3- 0
3. .8 Streaming Video Card........................................................................................................................3-
3. .9 Dual RGB Input Card ..........................................................................................................................3- 3
3. .10 Multiport I/O card............................................................................................................................3- 4
3. .11 Eos Extender ....................................................................................................................................3- 5
3. .1 Network ...........................................................................................................................................3- 8
3. .13 Distributed system...........................................................................................................................3-30
3. .14 VisuPlus ...............................................................................................................................................3-3
3.3 Starting Up..................................................................................................................................................3-33
3.3.1 Connecting .........................................................................................................................................3-33
3.3. Switching on ......................................................................................................................................3-34
3.3.3 Switching off......................................................................................................................................3-35
3.4 Configuration software...............................................................................................................................3-36
3.4.1 System configuration.........................................................................................................................3-36
3.4. X.11 configuration .............................................................................................................................3-40
3.4.3 Configuring a distributed system......................................................................................................3-48
3.4.4 Configuring an X server for VisuPlus standalone.................................................................................3-5

Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 ______________________________________________________________________ vi
3.4.5 Configuring a distributed system with multiple logical screens .....................................................3-53
3.4.6 Configuring Osiris...............................................................................................................................3-55
4 Operating ............................................................................................................................................ 4-1
4.1 Multi-screen capability.................................................................................................................................4-
4. Color management.......................................................................................................................................4-3
4. .1 Basic understanding ............................................................................................................................4-3
4. . Color capabilities of Eos.......................................................................................................................4-5
4.3 X display manager........................................................................................................................................4-7
4.4 X server extensions ......................................................................................................................................4-8
4.5 Window manager.........................................................................................................................................4-9
4.6 Displaying video and RGB signals..............................................................................................................4-1
4.6.1 The input cards ..................................................................................................................................4-13
4.6. The video channels............................................................................................................................4-16
4.6.3 The Xvideo client ...............................................................................................................................4-17
4.6.4 Displaying video and RGB signals.....................................................................................................4-19
4.6.5 The options ........................................................................................................................................4- 8
4.6.6 The resource files...............................................................................................................................4-33
4.7 Remote-Control for OverView display walls .............................................................................................4-39
4.7.1 The Remote-Control daemon............................................................................................................4-40
4.7. The Remote-Control clients (command line based) ........................................................................4-41
4.7.3 The GUI Remote-Control client..........................................................................................................4-47
4.7.4 Hot-keys.............................................................................................................................................4-50
4.8 Utilities........................................................................................................................................................4-51
4.8.1 Show wallinfo utility..........................................................................................................................4-51
4.8. DDC utility ..........................................................................................................................................4-51
4.8.3 Boot loader utility..............................................................................................................................4-51
4.8.4 Restart X server utility (service mmtserv)........................................................................................4-5
4.8.5 Backup and restore procedures (eosxs Utility) ................................................................................4-53
4.8.6 Release integrity utility (eosinfo) .....................................................................................................4-55
4.8.7 Network reporting utility (procfg) ....................................................................................................4-56
5 aintenance ....................................................................................................................................... 5-2
5.1 Hot plug procedure.......................................................................................................................................5-3
5.1.1 Redundant power module ..................................................................................................................5-3
5.1. RAID......................................................................................................................................................5-4
5. Exchange of consumables............................................................................................................................5-5
5. .1 Replacing the filter pad of Eos............................................................................................................5-5
5. . Replacing the battery ..........................................................................................................................5-6
5.3 Cleaning ........................................................................................................................................................5-7
6 Advanced Configuration ..................................................................................................................... 6-1
6.1 Installing additional hardware.....................................................................................................................6-
6.1.1 Opening the case.................................................................................................................................6-
6.1. Inserting additional main memory.....................................................................................................6-5
6.1.3 Inserting an additional expansion card ..............................................................................................6-7

Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 ______________________________________________________________________ vii
6.1.4 Switching resolution of graphic card ..................................................................................................6-8
6.1.5 Combination rules................................................................................................................................6-9
6.1.6 Multiport I/O Card .............................................................................................................................6-14
6. Software installation and configuration ....................................................................................................6-16
6. .1 Boot modes........................................................................................................................................6-16
6. . Installing system software on the hard drive ..................................................................................6-17
6. .3 Upgrading system software ..............................................................................................................6- 0
6. .4 Installation of Osiris...........................................................................................................................6-
6. .5 Custom configuration ........................................................................................................................6- 3
6. .6 X server parameters ..........................................................................................................................6- 4
6. .7 Advanced Eos configuration..............................................................................................................6- 5
6. .8 Redundant network adapter.............................................................................................................6-31
6. .9 Nearby color allocation......................................................................................................................6-33
7 Technical appendix ............................................................................................................................. 7-1
7.1 Technical data...............................................................................................................................................7-
7. Interfaces ......................................................................................................................................................7-9
7.3 Order codes.................................................................................................................................................7-16
8 Troubleshooting .................................................................................................................................. 8-1
8.1 Eos not booting.............................................................................................................................................8-
8. Eos does not boot from CD...........................................................................................................................8-3
8.3 Hot line .........................................................................................................................................................8-4
9 Index.................................................................................................................................................... 9-1

1. Introduction
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 1-1
1Introduction
This chapter explains the structure of the manual itself and the used typographic styles and symbols. Safety in-
formation is provided concerning the operation of computer systems from Barco.

1. Introduction
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 1-2
1.1 How this manual is or anized
This manual describes design and startup of EOS from Barco. It is divided into nine chapters:
•Introduction
explains the structure of the manual itself and the used typographic styles and symbols. Safety information is
provided concerning the operation of computer systems from Barco.
•Summary
gives an overview about the features of EOS.
•etting Started
describes the set up of EOS and provides you with a guide through the software configuration. If your EOS is
already configured within your working place you can skip this chapter and continue with chapter 4 Operatin .
•Operating
shows the capabilities which EOS offers displaying graphics and video. You are introduced into operating the
X video client for displaying video and RGB signals and the REMOTE-CONTROL client for controlling an OVERVIEW
Display wall.
•Maintenance
describes the maintenance of EOS.
•Advanced Configuration
may provide useful information for reconfiguring the software and hardware of your EOS.
•Technical Appendix
gives tabular overviews about the technical details of EOS, its components and of their interfaces.
•Troubleshooting
gives advice, if your EOS does not operate properly.
•Index
lists the keywords of the manual.
Chapters, pages, figures and tables are numbered separately. Chapters are indicated by a »point syntax«, e. g.
4.2.3, pages by a »dash syntax«, e. g. 2-1, as figures and tables are, e. g. figure 5-4.

1. Introduction
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 1-3
1.2 Styles and symbols
The typographic styles and the symbols used in this document have the following meaning:
Bold Labels, menus and buttons are printed in Bold font.
Condensed Links to both other chapters of this manual and to sites in the Internet are printed
condensed. In the on-line version of this manual all hyperlinks appear teal.
Courier Names of files and parts from programs are printed in the Courier font.
Courier bold Inputs you are supposed to do from the keyboard are printed in Courier bold font.
 Within a piece of programming code this arrow marks a line, that must be made up in two
lines, though meant to be one line.
If you do not heed instructions indicated by this symbol there is a risk of damage to the
equipment!
If you do not heed instructions indicated by this symbol there is a risk of electrical shock and
danger to personal health!
If you do not heed instructions indicated by this symbol there is a risk of damage to parts,
which are sensitive towared electrostatic charge!
If you do not heed instructions indicated by this symbol there is a risk to get harmed by sharp
objects!
If you do not heed instructions indicated by this symbol there is a risk that parts may
explode!
If you do not heed instructions indicated by this symbol there is a risk that hot parts impact
persons or objects!
This symbol marks passages concerning solely the distributed system.
The sheet icon indicates additional notes.
Next to this icon you find further information.
This arrow marks tips.
Next to this icon you find important notes.

1. Introduction
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 1-
1.3 Safety instructions
This section describes safety precautions, which must be observed when installing and operating a product from
Barco.
1.3.1 Standards
Safety regulations
EOS is built in accordance with the requirements of the international safety standard EN60950, UL1950 and CSA
C . No. 950, which are the safety standards of information technology equipment including electrical business
equipment.
These safety standards impose important requirements on the use of safety critical components, materials and
isolation, in order to protect the user or operator against the risk of electric shock and energy hazard, and having
access to live parts.
Safety standards also impose requirements to the internal and external temperature variations, radiation levels,
mechanical stability and strength, enclosure construction and protection against risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the user even when the equip-
ment's normal operation fails.
Electromagnetic interference
Electromagnetic emission of EOS complies with EN550 , EN61000-3- , EN61000-3-3 and the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules.
Electromagnetic immunity of EOS complies with EN550 4.
1.3.2 Precautions
For your own protection, observe the following safety precautions when installing,
operating and servicing your device:
•Before operating the units please read this manual thoroughly and retain it for future reference!
•Observe all warnings and instructions printed on the devices!
•Servicing not explicitly mentioned in this manual should never be carried out by unauthorized personnel!
Never open the case of the unit without first disconnecting the power supply cord!
•To prevent fire or electrical shock hazard, do not expose this unit to rain or moisture!
•This product should be operated from an AC power source!
•This unit may be connected to an IT power system!
•Check that the voltage and frequency of your power supply match those printed on the device label with the
rated electrical values!
•If you are not sure of the type of AC power available, consult your dealer or local power company!
•This product is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will
only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the ground-
ing-type plug!
•This equipment must be grounded (earthen) via the supplied 3 conductor AC power cable. (If the supplied
power cable is not the correct on, consult your dealer.)

1. Introduction
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 1-5
Mains lead (AC power cord) with CEE 7 plug:
The wires of the mains lead are colored in accordance with the following code:
yellow + green Earth (Ground)
blue Neutral
brown Line (Life)
Figure 1-1
CEE 7 plug
Power cord with ANSI 73.11 plug:
The wires of the power cord are colored in accordance with the following code.
yellow + green Earth (Ground)
white Neutral
black Line ( Life)
Figure 1-
ANSI 73.11 plug
•Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the
cord. To disconnect the cord, pull it out by the plug. Never pull the cord itself.
•If an extension cord is used with this product, make sure that the total of the ampere ratings on the products
plugged into the extension cord does not exceed the extension cord ampere rating.
•Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a risk of fire or electrical shock.
•Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the
set and have it checked by qualified service personnel before resuming operations.
•Lightning - For extra protection for this video product during a lightning storm or when it is lift unattended
and unused for a long period of time, unplug it from the wall outlet. This will prevent damage to the unit
due to lightning and AC power-line surges.

1. Introduction
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 1-6
1.3.3 Unpackin of devices
Note advises on the packaging for unpacking!
1.3.4 Installation
•Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage to it.
•Do not use this unit near water.
•Use only the power cord supplied with your unit. While appearing to be similar, other power cords have not
been safety tested at the factory and may not be used to power the unit. For a replacement power cord,
contact your dealer.
•Slots and openings in the cabinet and the sides are provided for ventilation; to ensure reliable operation of
the unit and to protect it from overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat register. This unit should not be placed in a built-in in-
stallation or enclosure unless proper ventilation is provided.
•The maximum recommended ambient temperature for this equipment is 40° C.
•When using the unit in a multi-unit rack assembly or closed assembly the ambient temperature inside the
assembly may not succeed the maximum rated ambient temperature.
•When installed in a rack, the installation should be such that the amount of air flow required for safe opera-
tion of the equipment is not compromised. The mounting of the equipment should be such that no hazardous
condition is achieved due to uneven mechanical loading.
1.3.5 Servicin
Mechanical or electrical modifications others than described in this manual must not be made to the devices.
Barco is not liable for damages resulting from modified devices.
Only authorized personnel should carry out other maintenance work not explicitly
mentioned in this installation manual!
Never open the case of EOS without first disconnecting all power supply cords!
Measurements and tests with the opened device may be carried out only in the factory or
by specially trained personnel, due to the dangers of electrical shock.
1.3.6 Cleanin
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. See sec-
tion 5.3 Cleanin for a cleaning instruction!
1.3.7 Re-packin
Keep the original shipping carton and packing material; they will come in handy if you ever have to ship your
unit. For maximum protection, repack your set as it was originally packed at the factory.

1. Introduction
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 1-7
1.4 Online manual
On the documentation CD OVT-2686-7 this manual DOC-3061-2 can also be found in electronic form. Insert the
CD in the CD ROM drive to view the manual. If autorun is enabled on the computer the start page of the CD
comes up automatically.
On a Linux computer you might first need to mount the CD by using the following command
mount /dev/cdrom /mnt/cdrom
and then to open the start page index.html of the CD manually.
On this start page you will find a link to the user's manual of Eos X Terminal.
Acrobat Reader can be used to view the file. Adobe® Acrobat® Reader is free and freely distributable software
that lets you view and print Adobe Portable Document Format (PDF) files.
If Acrobat Reader is already installed, the manual can be viewed just by a click on the respective link. Else the
Acrobat Reader must be installed first. The required installation files can also be found on the CD.

. Summary
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 2-1
2Summary
This chapter gives an overview about the features of EOS X Terminal.

. Summary
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 2-2
2.1 Properties
EOS was designed to control large, modular OVERVIEW display walls. Its multi-screen capability allows you to con-
trol displays of nearly any size and layout. The display area is one logically connected display. It is able to digi-
tally control monitors based on modern technologies such as Single LCD, DLP™ and Poly-Silicon LCD with the
highest display quality. High contrast and absolute immunity to electromagnetic interference distinguishes this
type of control. CRT monitors and projectors can also be controlled by EOS using the optional analog output.
(DLP is a trademark of Texas Instruments Incorporated)
The hardware and software of EOS is based on world-wide accepted standards, so that the investment is pro-
tected. EOS offers the following exceptional capabilities:
•High performance graphics output using the most modern processor and chip technologies
•Supports current LAN and WAN interfaces
•Graphic and video outputs in high color quality
•Video in a window, up and down scaleable
•Overlapping and freely moveable video and graphics windows of unlimited size
The EOS system provides a flexible and scalable architecture, which is suitable to support all sizes of display walls.
Small systems up to 10 projection cubes can be set up with one EOS COMPACT. For medium and large sized display
walls EOS COMPACT with one or more EOS EXTENDERS or the distributed system EOS POWER can be used. Applications
that require the video and RGB insertion unit VISUPLUS can be controlled with EOS ULTRA and the wall management
software OSIRIS. EOS ULTRA consists either of a single EOS or a distributed system.
Whether EOS COMPACT, EOS POWER or EOS ULTRA both the user and the application software ‘see’ one single display.
Installation, operation and service do not differ from that of a standard X terminal.
EOS offers the possibility to operate it in normal boot mode or in eXtended safety boot mode. Normal boot mode
offers full write access to the hard disk. eXtended safety boot mode offers in addition to normal boot mode a
backup partition for improved system safety. System files are stored safely, and faultless startup is guaranteed
even after unpredictable events, e.g. power failure.

. Summary
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 2-3
Eos Compact
Up to 1 projection cubes can be controlled by a single EOS COMPACT.
Figure -1
8 channel EOS
Eos Extender
An EOS EXTENDER increases the capacity of EOS for graphic channels and video and RGB insertion. An X Window
Desktop with multiple video and RGB sources can such be displayed on 1 projection modules.
E OS C OMPACT E OS E XTENDER
X Window
TCP/IP
PCI
E OS
E OS E XTENDE R
Figure -
EOS COMPACT with EOS EXTENDER

. Summary
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 2-
Eos Power
The distributed system EOS POWER consists of one EOS central device, connected to several EOS rendering machines,
which control the projection modules.
Figure -3
EOS POWER
Eos Ultra
To the EOS ULTRA system belongs depending on the wall size either a single EOS or a distributed system with ren-
dering machines. The VISUPLUS units are connected to EOS and insert the video and RGB sources in the defined win-
dows. To control the VISUPLUS units, the software OSIRIS has to be installed on EOS and VISUPLUS.
Eos Ultra
Ethernet, TCP/IP
X Window
E OS
19:00
V ISU
P LUS
V ISU
P LUS
V ISU
P LUS
Figure -4
EOS ULTRA

3. Getting started
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 3-1
3Gettin started
This chapter describes the set up of EOS and provides you with a guide through the software configuration. If your
EOS is already configured within your working place you can skip this chapter and continue with chapter 4
Operatin .

3. Getting started
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-200 _____________________________________________________________________ 3-2
3.1 Examinin
3.1.1 Eos
The case of EOS is available in two models: The standard case and the case for redundant power supply and RAID
(Redundant Array of Independent Disks).
The front
EOS standard:
18
3
13
1110a
12
74
RESET
KB/LK
POWER
H.D.D.
POWER
29
EOS with redundancy options:
1
3
12
1
8
35411
10b
6
29
1 air supply
2 handle of filter mounting
3 restart button
4 lock keyboard switch (without functionality from model models EOS-30 6-5 and EOS-33 7- on)
5 buzzer reset button: power module failed
6 LED: power module failed
7 LED: hard disk access
8 LED: power on
9 floppy disk drive
10a/b hard disk drive / RAID subsystem
11 CD ROM drive
12 (reserved)
13 power button
Figure 3-1
front view of EOS