Barco Sedomat 2500 Owner's manual

Your fast and easy solution for jet and yarn machines
www.barco.com/sedo
Plug ‘n Play for Sedomat 2500
You are looking for an easy to install controller for a yarn
or jet dyeing machine? Your budget is limited? Then we
have the right solution for you!
The Sedomat 2500 Plug and Play is already pre-congured
and pre-programmed. You can just install it yourself, adapt
some settings and start your rst batch!
It is idealy suited for most yarn and jet dye machines with
up to four tanks.
To adapt the controller ideally to your machine functions
you can get the Sedomat 2500 Plug and Play with 8, 16,
32 and 48 inputs/outputs.
The Probus DP option enables you to add further I/O‘s
later on in case the machine automation should be changed
or extended.
Plug ‘n Play
easy installation and connection

www.barco.com/sedo
Plug and Play for Sedomat 2500
Integrated functionality:
• Yarn and jet machines with up to
four tanks.
• Analog or digital level for machine
and side tanks.
• Analog speed settings for main
pump in %.
• Up to three water- and drain types
implemented.
• Dosing from side tank with on/
off- or analog regulation.
• Dosing via level or pulses
• Temperature control in on/off- or
analog regulation.
• Fill and rinse machine with water
counter.
• Water consumption via water
counter.
• Re-start after power drop.
• Units can be set to different
standards (°C, °F, liters, gallons).
• Flexible coupling of up to four
machines.
• Dispenser connection via
SedoMaster.
Supports a lot of machine functions
Machine visualization for yarn machine
Barco Sedo GmbH, Germany
Neuwies 1, D-35794 Mengerskirchen
Phone: + 49 6476 31-0, Fax: [phone]
[e-mail]
BarcoVision, Belgium
Phone: + 32 56 26 26 11, Fax: [phone]
[e-mail]
Loepfe Brothers Ltd. - Treepoint, Switzerland
Phone: + 41 43 488 11 88, Fax: [phone]
[e-mail]
BarcoVision LTD, UK
Phone: [phone],
Fax: [phone]
[e-mail]
BarcoVision LLC, USA
Phone: [phone], Fax: [phone]
[e-mail]
Technical specications are subject to change without prior notice.
Benets:
• No extra installation cost for a
service technician.
• Technical installation can be done
by yourself, support via phone,
email and online.
• Most hardware (safety) lockings
are already integrated in the PLC
software.
• All languages possible.
• Available for all Sedomat 2500
versions with 8, 16, 32 and 48
digital inputs/outputs. All versions
can be ordered with Probus
DP option. The ordered versions
depends on the number of
required inputs/outputs.
• We recommend to reserve some
I/O’s for further extensions or to
order the Plug and Play version of
the Sedomat 2500 with Probus
DP option.
Integrated functionality:
• For jet machines:
- Nozzle pressure
control.
- Fabric rotation
control for up
to six channels
(tangle control).
- Analog speed settings for reel
(m/min).
- Seam detection.
- Measurement of cyle time.
- Rinsing, heating and dosing
with cycles.
• For yarn machines:
- Fully ooded or air
pad mode.
- Differential pressure
control.
- Flow direction control (in-out/
out-in).