Bartscher IW 35-EB User manual

105997 / IW 35-EB
Original-Gebrauchsanleitung
V1/0119

- 23 -
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 24
1.1 Key to symbols..................................................................................................... 24
1.2 Safety instructions................................................................................................ 25
1.3 Use as intended ................................................................................................... 30
1.4 Use against the intended purpose........................................................................ 30
2. General information................................................................................................ 31
2.1 Liability and Warrantees....................................................................................... 31
2.2 Copyright protection ............................................................................................. 31
2.3 Declaration of conformity...................................................................................... 31
3. Transport, packaging and storage......................................................................... 32
3.1 Delivery check...................................................................................................... 32
3.2 Packaging............................................................................................................. 32
3.3 Storage................................................................................................................. 32
4. Technical data ......................................................................................................... 33
4.1 Overview of parts ................................................................................................. 33
4.2 Technical data...................................................................................................... 34
5. Installation ............................................................................................................... 35
5.1 Place of installation............................................................................................... 35
5.2 Installation............................................................................................................ 36
5.3 Electric connection ............................................................................................... 37
6. Operation................................................................................................................. 38
6.1 Functionality of induction cookers ........................................................................ 38
6.2 Suitable cookware................................................................................................ 39
6.3 Operation.............................................................................................................. 40
7. Cleaning................................................................................................................... 42
8. Possible malfunctions ............................................................................................ 43
9. Waste disposal........................................................................................................ 44
Bartscher GmbH phone: [phone]
Franz-Kleine-Str. 28 fax: [phone]
33154 Salzkotten Service-Hotline: [phone]
Germany www.bartscher.com
GB/UK

- 24 -
Read these instructions before using and keep
them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety cControls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions in this
manual.
1.1 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
DANGER!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.

- 25 -
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
CAUTION! Magnetic field!
This symbol informs that the magnetic fields occurring during the device
operation may cause interference.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.2 Safety instructions
The device is not intended for use by individuals (including
children) with physical or mental disabilities, insufficient
experience, and/or insufficient knowledge unless such persons
are under the care of a person responsible for their safety or
have received instructions regarding appropriate use of the
device.
Children should be observed to ensure that they are not playing
with or starting the device.
Never leave the device unattended when in use.
Only use the device indoors.
The device is not designed for use with an external timer or
remote control.

- 26 -
The device must be operated in correct and safe technical
condition only. In case of operational problems disconnect the
device from the power supply and contact the service company.
Prevent access of children to the package materials like plastic
bags and foamed polystyrene elements. Suffocation hazard!
Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the
device. Do not attempt to repair the device yourself.
Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous
for the user or lead to damages of the device or personal injury,
and further, the warranty expires.
To prevent hazards and to ensure optimum efficiency, no
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions
below.
Never allow the power cable to come into contact with heat
sources or sharp edges. The power cable should not hang over
the side of the working surface. Ensure that no one can step on
or trip over the cable.
The power cable must not be folded, bent or tangled, and must
always remain fully unrolled. Never place the device or other
objects on the power cable.
Do not cover the cable. Keep away the cable from operating
range.

- 27 -
Check the power cord regularly for damage. Do not use the
appliance if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified electrician
in order to avoid dangers.
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
Never immerse the device, the power cord and the power plug
in water or other liquids.
Do not use any acid agents and make sure no water ingresses
the device.
Never operate the device with moist hands or standing on wet
floor.
Remove the plug from its socket:
-when the device is not used,
-in case of anomalies during operation,
-before cleaning.
HOT SURFACE! Burn hazard!
To avoid the hazard results please follow the instructions below.
During the operation the cooking surface becomes very hot.
Keep in mind, that the induction cooker itself does not produce
any heat during cooking. However, the heat from the pan will
leave the cooking surface hot! After use the surface is hot.
Do not touch!

- 28 -
Do not place any metal kitchen utensils, pot covers, frying pans,
knives, or other metal objects on the cooking field. After the
device activation they may become very hot.
Keep in mind that the objects like rings, watches, etc. may
become hot in the vicinity of the cooking surface.
Do avoid overheating do not place the aliminium foil or metal
plates on the surface of the device.
WARNING! Fire hazard!
To avoid the hazard results please follow the instructions below.
Avoid prolonged heating of oils and fats! The overheated oil or
fat may quickly ignite. In case of ignition on the cooking field
deactivate the device and cover the flame with large pot cover,
plate, or moistened cloth.
Never use water for extinguishing!
After covering the flame wait for the cooking pots to cool down
and assure appropriate amount of fresh air.
WARNING! Explosion hazard!
To avoid the hazard results please follow the instructions below.
Do not place any flammable plastic containers or acidic and
basic materials near the device as it may limit its life and cause
deflagration during the activation.

- 29 -
Do not heat closed containers, e.g. canned food, on the
induction cooking field. The containers or cans may explode
(crack) due to overpressure. Open the can and place it in the
pot with some water heated on the cooking field.
CAUTION! Electromagnetic field hazard!
To avoid the hazard results please follow the instructions below.
The magnetic objects, like credic cards, data storage devices,
or calculators, must not be placed in the direct vicinity of the
operating device. Their operation may be disturbed by the
magnetic field.
Do not open the lower cover!
Make sure that the cooking pots are placed in the centre of the
work field to cover the electromagnetic field in the best possible
range.
The scientific research confirm that the induction cookers are not
dangerous. But persons with the artificial pacemakers should
keep the distance of min. 60 cm from the operating device.
CAUTION!
In order to avoid any damages of the device follow the
instructions below.
Do not use any sharp objects or abrasive agents for cleaning
the surfaces.
The device should not be used as a shelf or for storage of
empty kitchenware.

- 30 -
The cooking surface is made from glass resistant to high
temperature. In case of damages or small cracks disconnect
the device from the power supply immediately and contact the
service.
1.3 Use as intended
Every use of the device for a different purpose and/or in a way that diverges from the
intended use is not allowed and is assumed as the use against the intended purpose.
Any claims against the manufacturer or their authorized representatives as a consequence
of experiencing damage resulting from the use against the intended purpose are
inadmissible.
The liability for damage occurred during the use of the device against its intended
purpose is borne solely and exclusively by the user.
Safety operation of the device is guaranted only when it is used for its intended purpose
and according to the instructions included in this manual.
The device is intended for home use or in similar places such as:
in stores, offices or similar places of work;
in agricultural holdings;
for customers in hotels, motels and similar dwellings;
in Bed & Breakfast facilities.
The integrated induction wok is intended only for heating and cooking food using
appropriate cookware.
1.4 Use against the intended purpose
Any use other than those mentioned in point “1.3 Use as intended“ is assumed as the
use against the intended purpose and is not allowed.
The use against the intended purpose may lead to severe injury or damage caused by
hazardous voltage, fire or high temperature. It is allowed to use the device to perform
only the work described in the instruction manual. Improper use may cause the device
damage.
Any manipulation with the device, assembly or maintenance work may be performed
exclusively by the authorized service staff.

- 31 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
-violation of advice concerning operation and cleaning;
-use other than designed;
-alterations made by user;
-use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.

- 32 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
If you liked to dispose the packing, consider the regulations applicable
in your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-do not store outdoors,
-keep it dry and dust-free,
-do not expose it to aggressive media,
-do not expose it to direct sunlight,
-avoid mechanical shocks and vibration,
-in case of longer storage (> 3 months) make sure you check the state
of the packaging and the parts regularly, if required refresh or renew.

- 33 -
4. Technical data
4.1 Overview of parts
1
Concave hob
2
Feet (4)
3
Control panel
4
Multi-position screw connector
5
Ventilation holes
6
Body
1
4
5
2
6
3

- 34 -
4.2 Technical data
Description
Integrated induction wok IW35-EB
Code-No.:
105997
Material:
Body: stainless steel, hob: ceramic glass
Colour:
Silver / black
Model:
Number of hobs: 1
Hob type: induction
Control: electronic, knob, touch
Device connection: ready to plug in
Pot detection
Overheating protection
Digital display
Regulation of: power, temperature
Indicator lights: power, temperature
Features:
-Can be built-in
-separate control unit, cable length: 500 mm
-2 fans
Power level:
10, 500 W - 3500 W
Temperature adjustment:
10 degrees, setting range: every 20 °C
Temperature range: 60 °C - 240 °C
Power:
3.5 kW / 230 V~ 50/-60 Hz
Dimensions:
Device: W 370 x D 390 x H 135 mm
Concave hob: ø 260 mm
Control unit: W 170 x D 82 x H 60 mm
Weight:
7.5 kg.
We reserve the right to make technical changes!

- 35 -
5. Installation
5.1 Place of installation
Unpack the device and remove all package materials according to the valid
environment protection regulations.
CAUTION!
Never remove the rating plate and any warning signs from the device.
Place the device on top of an even, dry, stable, and water and heat-resistant surface.
Do not use the device in the vicinity of open fire, electric ovens, heating furnaces,
or other heat sources.
Make sure that the ventilation holes are not blocked or covered as it may cause the
device to overheat.
Leave a minimum distance from flammable walls or other objects 5 –10 cm.
Never place the device in humid or wet environment.
Do not install the device near the devices or objects which are sensitive to magnetic
fields (e.g.: radio, TV set etc.).
Place the device in such a way that the access to the plug is not obstructed and
the device may be quickly disconnected from the power supply when required.

- 36 -
5.2 Installation
The device and the control unit are adjusted to the installation in the work table board.
During installation, follow these \instructions:
1. For installation, select a board of the work table that is heat resistant to avoid
deformation due to the device heat radiation.
2. Make sure that the thickness of the work table board complies with the load
requirements (at least 30 mm).
3. Cut the opening in the work table board according to the diagram below.
4. Provide sufficient ventilation around the device and make sure that the ventilation
holes are not blocked.
5. Hint: A secure distance between the hob and a cupboard above the device should be
at least 760 mm if no extractor hood is provided for.

- 37 -
5.3 Electric connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label). Connect the device only in case of
compliance!
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
The cables is laid underneath the device.
Turn the control knob to “OFF” position .
Connect the control panel and the induction cooker using a multipolar screw
connector.
Insert the power plug into a grounded single socket.
The acoustic signal sounds. The device is now in STANDBY.

- 38 -
6. Operation
6.1 Functionality of induction cookers
With induction cooker, an electric voltage is applied on a conductor spool beneath the
glass. This creates magnetic fields, which directly heat up the bottom of the cookware
through a physical effect.
This means saving time and energy, because contrary to common hotplates, the
cookware is heated up, not the heating element and the glass.
Due to the technical characteristics described above, another advantage is the very
short start-up cooking time.
In addition, the heat supply promptly adapts to changed settings and can be controlled in
small steps. The induction cooker reacts to changed settings just as fast as a gas stove,
as the energy reaches the pot immediately without having to heat up other materials first.
The induction technology combines this fast reaction with the basic advantage of
electricity, meaning being able to exactly adjust the heat supply.
Additional advantages of an induction cooker:
As the cooking zone is only heated up indirectly via the bottom of the cookware,
over spilling food cannot stick. The glass cooking zone is only heated up by the
hot cookware.
If the device is turned on and no dish for cooking is present or is removed, a repeating
audio signal will sound and the device will turn itself off after approx. 30 seconds.
The device will detect if the appropriate cookware is placed on the heating plate.
If the cookware is not appropriate for induction hotplates, energy will not flow.
The device will turn off after approx. 30 seconds.

- 39 -
6.2 Suitable cookware
Use only round woks made of steel, stainless steel or another material intended for
induction heating (follow the cookware manufacturer's instructions).
NOTE!
For proper functioning, the wok should have a magnetic bottom
(the magnet must be fixed permanently).
e.g. Bartscher W360R wok pan
Material: stainless steel
Cold handles: two handles opposite
each other
Capacity: 6 litres
Diameter: 360 mm
Dimensions: W 640 x D 360 x H 220 mm
Weight: 2.85 kg
Stainless steel lid included
Code- No.: 105981
If a non-magnetized wok is applied, it may result in a loss of power and reduce
protection from overheating. This is why aluminum, bronze or non-metallic
cookware must not be used.

- 40 -
6.3 Operation
Control panel
1
Digital display
4
OFF position of the control knob
2
Power ( ) and temperature ( )
LED indicator light
5
Power/temperature function key
3
Control knob
Clean the device and control unit before the first use according to the instructions
included in the section 7 “Cleaning “.
Place an appropriate wok pan with the dish to be cooked in the concave hob.
1
4
3
2
5

- 41 -
CAUTION!
Never place empty pans on the hob.
Warming up an empty pot or frying pan activates the overheating protection
system; an error acoustic signal sounds and the device turns off. The digital
display shows “E2”.
Remove the cookware from the hob and leave the device for a few minutes to
cool down. Then, you may start using the device again as usual.
Settings
Power
To start the device, turn the control knob to the right until you hear a “click”.
The device turns to the power mode and the display shows default power level “1“.
The power LED indicator light ( ) will come on.
Using the control knob at any time you can change settings within the range 1-10.
The digital display shows the selected power level.
Temperature
To leave the power mode, by pressing the function key you can move to the
temperature mode. The device switches to the factory-set temperature of 60 °C,
which appears on the digital display. The temperature mode indicator light ( ) will
come on.
You can modify the settings between 60 °C and 240 °C using the control knob.
The following settings are available:
60, 80, 100, 120, 140, 160, 180, 200, 220 and 240 °C.
NOTE!
During the operation it is possible to switch between the power and
temperature modes at any time, by pressing the function key and
selecting the desired power or temperature level using the control knob.