Bartscher 195 Plus User manual

195 Plus - 220 Plus - 250 Plus -
275 Plus - 300 Plus
174196-174221-174251-174276-174301

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Technical Support Hotline: [phone]
www.bartscher.com
Version: 4.0
Date of preparation: 2023-10-25
EN
2

174196 1 / 28
Original instruction manual
1Safety............................................................................................................2
1.1 Explanation of Signal Words....................................................................2
1.2 Safety instructions....................................................................................3
1.3 Intended Use ...........................................................................................5
1.4 Unintended Use.......................................................................................5
2General information.......................................................................................6
2.1 Liability and Warranty ..............................................................................6
2.2 Copyright Protection ................................................................................6
2.3 Declaration of Conformity ........................................................................6
3Transport, Packaging and Storage................................................................7
3.1 Delivery Check.........................................................................................7
3.2 Packaging................................................................................................7
3.3 Storage....................................................................................................7
4Technical Data...............................................................................................8
4.1 Technical Specifications ..........................................................................8
4.2 List of Components of the Appliance .....................................................11
4.3 Functions of the Appliance.....................................................................13
4.4 Protective Elements of the Appliance .................................................... 14
5Installation and operation ............................................................................16
5.1 Installation..............................................................................................16
5.2 Operation...............................................................................................17
6Cleaning and Maintenance..........................................................................22
6.1 Safety Instructions for Cleaning.............................................................22
6.2 Cleaning.................................................................................................23
6.3 Maintenance ..........................................................................................26
7Possible Malfunctions..................................................................................27
8Disposal....................................................................................................... 28

Safety
2 / 28 174196
EN
Diese Bedienungsa nleitung beschreibt di eI nstallation, Bedienu ngu nd Wartung des Geräts u ndg ilt als wichtige Infor mationsquelle un dN achschlagewer k.Die Ke nntnis aller enthalten enSic herheitshinweis eu ndH andlungsan weisungen sch afft die Voraussetzu ngf ürd as sichere und sachg erechte Arbeiten mit d emG erät.D arüber hin aus müssen die für den Eins atzbereich des Gerät sg eltenden örtlichen Un fallverhütungsvorsc hriften und allgemein en Sicherheitsb estimmungen eingehalt en werden. Diese Be dienungsanleitung is t Bestandteil des Prod ukts und muss in unmitt elbarerN ähe des Geräts für d as In¬stallations-, Bedienungs- , Wartungs- und Reinigu ngspersonal jederzeit z ugänglich auf¬b ewahrt werden. Wenn das Ger ät an eine dritte Person
weitergegeben wird , muss die Bedienungsa nleitung mit ausgehä ndigt werden.
Read this instruction manual before using and keep it available
at all times!
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.

Safety
174196 3 / 28
EN
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
,di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2 Safety instructions
Electrical Current
•Too high a mains voltage or incorrect installation may cause electric shock.
•The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
•To avoid short-circuit, the appliance should be kept dry.
•If there are malfunctions during operation, disconnect the appliance from the
power supply.
•Do not touch the appliance’s plug with wet hands.
•Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
•Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
•Do not transport the appliance, holding it by the power cord.
•Do not allow the power cord to come into contact with heat sources or sharp
edges.
•Do not bend, pinch nor knot the power cord.
•Always completely unwind the power cord.
•Never place the appliance or other objects on the power cord.
•Always take hold of the plug to disconnect the appliance from the power supply.

Safety
4 / 28 174196
EN
•Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Safety During Operation of the Slicer
•Never put hands between the pusher handle and the blade or the movable slice
thickness partition until they are completely secured (slice thickness adjustment
knob set to “0” position).
•During slicing operation keep hands away from the blade in order to avoid cuts
and accidents. In order to avoid accidents, always use the pusher handle to
push the product to be sliced to the movable slice thickness partition.
•The blade is very sharp; caution is advised when checking the blade sharpness.
During operation wear cut protection gloves class 5 of DIN EN 388 standard!
•During operation, the operator should wear safety clothing that meets local
sanitary standards.
Supervised Usage only
•Only supervised appliance may be used.
•Always remain in an immediate vicinity of the appliance.
Operating Personnel
•The appliance may only be operated by qualified personnel and trained
specialist personnel.
•This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
•Children should be supervised to ensure that they are not playing with or
switching on the appliance.

Safety
174196 5 / 28
EN
Improper Use
•Unintended or prohibited use may cause damage to the appliance.
•The appliance may only be used when its technical condition is flawless and
allows for safe operation.
•The appliance may only be used when all connections are executed according
to rules of law in force.
•The appliance may only be used when it is clean.
•Use only original spare parts. Never attempt to repair the appliance on your own.
•Do not introduce any changes in the appliance nor modify it.
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–Slicing sausages
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
The following is an unintended use:
–Cutting of products that are not food products.
–Cutting products with bones.
–Cutting frozen products.

General information
6 / 28 174196
EN
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
–failure to observe instructions,
–unintended use,
–technical alterations introduced by the user,
–usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.

Transport, Packaging and Storage
174196 7 / 28
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
–in closed rooms;
–in dry and dust-free surrounding;
–away from aggressive agents;
–in a location protected against sunlight;
–in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.

Technical Data
8 / 28 174196
EN
4 Technical Data
Version / Characteristics
•Oblique cutter / gravity slice
•Carriage: removable (except art. No. 174196), 2 handles
•Designed for: sausages
•Pusher
•Slice guide
•Sharpener
•Blade guard: double
•Magnetic switch
•Control: button
•ON/OFF switch
•Indicator light: ready for operation
4.1 Technical Specifications
Name:
Slicing machine 195 Plus
Art. No.:
174196
Material:
aluminium, plexiglas, plastic
Blade diameter, in mm:
195
Maximum rotational speed, in RPMs:
277
Slicing thickness range, in mm:
1 - 12
Slicing length, in mm:
185
Slicing height, in mm:
130
Degree of protection:
IPX3
Connected load:
0,11 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
335 x 440 x 340
Power cord length, in mm:
1,4
Weight, in kg:
11,2

Technical Data
174196 9 / 28
EN
Name:
Slicing machine 220 Plus
Art. No.:
174221
Material:
aluminium, plexiglas, plastic
Blade diameter, in mm:
220
Maximum rotational speed, in RPMs:
191
Slicing thickness range, in mm:
1 - 12
Slicing length, in mm:
205
Slicing height, in mm:
135
Degree of protection:
IPX3
Connected load:
0,13 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
410 x 475 x 360
Power cord length, in mm:
1,4
Weight, in kg:
14,0
Name:
Slicing machine 250 Plus
Art. No.:
174251
Material:
aluminium, plexiglas, plastic
Blade diameter, in mm:
250
Maximum rotational speed, in RPMs:
190
Slicing thickness range, in mm:
1 - 12
Slicing length, in mm:
195
Slicing height, in mm:
140
Degree of protection:
IPX3
Connected load:
0,13 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
435 x 510 x 385
Power cord length, in mm:
1,4
Weight, in kg:
14,8

Technical Data
10 / 28 174196
EN
Name:
Slicing machine 275 Plus
Art. No.:
174276
Material:
aluminium, plexiglas, plastic
Blade diameter, in mm:
275
Maximum rotational speed, in RPMs:
190
Slicing thickness range, in mm:
1 - 12
Slicing length, in mm:
180
Slicing height, in mm:
150
Degree of protection:
IPX3
Connected load:
0,13 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
435 x 520 x 385
Power cord length, in mm:
1,4
Weight, in kg:
16,9
Name:
Slicing machine 300 Plus
Art. No.:
174301
Material:
aluminium, plexiglas, plastic
Blade diameter, in mm:
300
Maximum rotational speed, in RPMs:
186
Slicing thickness range, in mm:
1 - 15
Slicing length, in mm:
230
Slicing height, in mm:
175
Degree of protection:
IPX3
Connected load:
0,2 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
480 x 630 x 461
Power cord length, in mm:
1,4
Weight, in kg:
20,8

Technical Data
174196 11 / 28
EN
4.2 List of Components of the Appliance
Fig. 1

Technical Data
12 / 28 174196
EN
Description for Fig. 1
1. Blade
2. Blade protective ring
3. Blade guard
4. Pusher handle with pusher
5. Food tray
6. Carriage
7. Carriage lock knob (except for
model No. 195 Plus, art. No.
174196)
8. Slice thickness adjustment knob
9. ON/OFF switch with indicator light
10.Feet (4 pcs)
11.Handle with hand protection
12. Slice tray
13.Movable slice thickness partition
14. Pusher handle guard
15.Sharpener
16.Slice guide
17.Sharpener retaining screw
18.Blade guard retaining screw
19.Power cord
20.Blade protection device
Accessories (included in the scope of delivery!)
Basic blade
Material: high-alloy steel
Application: sausages
Compatible model:
195 Plus
220 Plus
250 Plus
275 Plus
300 Plus
Diameter (mm):
195
220
250
275
300
Dimensions (mm):
W 195
D 195
H 15
W 220
D 220
H 16
W 250
D 250
H 18.2
W 275
D 275
H 22
W 300
D 300
H 21
Weight (kg):
0,69
0,79
0,98
1,5
1,6
Art. No.:
174060
174061
174062
174063
174064

Technical Data
174196 13 / 28
EN
Zu
Accessories (not included in the delivery!)
Blade with corrugated cutting edge
Material: steel, hard chrome-plated
Compatible model:
195 Plus
220 Plus
250 Plus
275 Plus
300 Plus
Diameter (mm):
195
220
250
275
300
Dimensions (mm):
W 195
D 195
H 13
W 220
D 220
H 15
W 250
D 250
H 18
W 275
D 275
H 22
W 300
D 300
H 23
Weight (kg):
0,64
0,67
1,17
1,47
2,13
Art. No.:
174050
174052
174054
174056
174058
Blade, non-stick coating
Material: stainless steel, Teflon-coated
Compatible model:
195 Plus
220 Plus
250 Plus
275 Plus
300 Plus
Diameter (mm):
195
220
250
275
300
Dimensions (mm):
W 195
D 195
H 13
W 220
D 220
H 15
W 250
D 250
H 18
W 275
D 275
H 22
W 300
D 300
H 23
Weight (kg):
0,64
0,67
1,17
1,47
2,13
Art. No.:
174051
174053
174055
174057
174059
4.3 Functions of the Appliance
With this slicing machine you can quickly cut sausages into slices of various
thicknesses.

Technical Data
14 / 28 174196
EN
4.4 Protective Elements of the Appliance
3
Blade guard
4
Pusher handle with pusher
9
ON/OFF switch
(after a power failure, the appliance can
only be switched on again by pressing the
white START button in the appliance
ON/OFF switch)
14
Pusher handle with grip and hand
protection (11)
Carriage locking device (Fig. 3).
(Models 174221, 175251, 174276,
174301; model 174196 —non-removable
carriage)
The carriage can only be removed for
cleaning when the slice thickness
adjustment knob is undone beyond the
zero setting and the carriage is pulled
towards the slice thickness adjustment
knob:
–In doing so, the carriage lock knob
must be loosened. If it cannot be
completely loosened, pull the carriage
again in the direction of the carriage
lock knob until the safety device
audibly engages.
–Fully loosen the carriage lock knob and
remove the carriage from the appliance
by pulling it upwards.
Fig. 2
Fig. 3

Technical Data
174196 15 / 28
EN
15
Sharpener serving as the upper
blade guard
There is a magnetic connector (a) on the
sharpening tool: the appliance operates
only when the sharpener is properly
positioned.
When the sharpener is removed during
operation the appliance stops. Once the
sharpener is properly repositioned the
appliance does not start automatically but
it needs to be switched on again with the
white START button in the ON/OFF switch
(B, Fig. 7).
Fig. 4
Residual Risks
Despite all mechanical and electrical protective means the appliance is equipped
with according to the regulations (both in the operational phase and during cleaning
and maintenance), residual risks exist that cannot be completely precluded. In this
instruction manual they are indicated by the warning word WARNING. Observe also
warning indications on warning stickers placed on the appliance.
Residual risks (e.g., danger of injury) may be present also when slicing smaller
pieces or pushing residues. To this end, the appliance is equipped with the pusher
handle with pusher.
After disassembly of the appliance for cleaning, pay particular attention to the blade,
as with the sharpener removed, part of the blade is exposed.

Installation and operation
16 / 28 174196
EN
5 Installation and operation
5.1 Installation
Unpacking / Positioning
•Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•Never place the appliance in humid or wet environment.
•Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•The appliance should be placed on surfaces that are:
–even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
–sufficiently large, and thus enabling usage of the appliance with no
problems;
–easily accessible;
–well ventilated.
•Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•When selecting the place to set the appliance in, consider the dimensions of the
appliance (section 'Technical Specification'). Provide enough space to securely
operate the appliance.
•Operation location must be well lit.
•Put the slicing machine in such a way that the person operating it could stand
straight and stable in front of the appliance. The operator has to be able to
constantly see the ON/OFF switch and the slice thickness adjustment knob.

Installation and operation
174196 17 / 28
EN
To securely use the slicing machine, keep at least 20 cm clearance from the slicing
machine and walls, objects, cupboards, etc.
•The clearance from the floor should be approx. 80 cm.
•Place the appliance in a room, in which temperature ranges from +5°C do +32
°C, and the maximum moisture level should be 70%.
Power supply connection
•Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
5.2 Operation
Before First Use
1. Thoroughly clean the appliance and equipment before first use observing
instructions in section 6 'Cleaning and Maintenance'.
2. Fit the enclosed slice guide (16).
3. To this end, loosen the lower screw (f) of the
previously installed blade protection device (20)
on the rear of the appliance with a suitable
screwdriver.
4. Attach the slice guide (16) to the blade
protection device (20) using the loosened screw
(f).
Fig. 5

Installation and operation
18 / 28 174196
EN
Check before starting the appliance:
–whether the appliance is connected to a
grounded single socket.
–whether the carriage (6) is firmly
connected to the carriage lock knob (7).
–the movement of the carriage (6) and
that no obstacle is blocking and no
object is on the carriage tray (5).
–lifting and lowering of the pusher
handle (4) without any obstacles during
its movement.
–hole of the cut thickness movable
partition (13) with the slice thickness
adjustment knob (8), rotating it
clockwise and counter-clockwise.
–whether the sharpener (15) is correctly
mounted and that there is the possibility
of removing it without any problems.
Fig. 6
ON/OFF Switch
Fig. 7