Bauhn HE414066 User manual

Cordless Headphones
Model Number: HE414066
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
INSTRUCTION MANUAL

Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 monthsfrom the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benefits conferred by this warranty are in addition to all rights and remedies in respect
of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian ConsumerLaw.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
MODEL: HE414066 PRODUCT CODE: 47936 12/2014
Cordless Headphones
1300 663 907 [e-mail]
AUSYEAR WARRANTY
1

3
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Contents
Warranty 2
Contents 3
Welcome 4
General Safety Instructions 5
Product Features 6
Parts List / Technical Specications 7
Instructions 8
FAQ’S 12
Repair and Refurbished Goods or Parts Notice 15

4
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Congratulations on choosing to buy a BAUHN® product. By doing so you
now have the assurance and peace of mind that comes with purchasing a
product made by one of the leading manufacturers. All products brought to
you by BAUHN® are manufactured to the highest standards of performance
and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 1 Year Warranty. We hope
you will enjoy using your purchase for many years to come.
Welcome

5
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Read this manual thoroughly before rst use and keep it in a safe place for
future reference, along with the warranty card, purchase receipt and carton.
The safety precautions enclosed herein reduce the risk of re, electric shock
and injury when correctly adhered to. Follow all instructions and take notice of
all warnings to reduce the risk of re or electric shock.
• Do not expose this product to water, rain, moisture or dust. Electronic
products of this kind should never be subjected to moisture or extreme
temperatures.
• Do not attempt to open the product housing. There are no user-
serviceable parts inside this product.
• Do not repair the unit yourself. If your device is not functioning correctly,
disconnect the product from power, and contact after sales support.
• Supervise young children to ensure they do not play with the product.
• Do not expose to chemicals, oils, or other liquids.
• Do not expose to naked ames or other heat sources.
• Do not drop or subject the device to undue shock.
• Keep device away from magnets at all times.
• Keep away from direct sunlight. Indoor use only.
• Unplug this device during lightning storms or when unused for long
periods of time.
General Safety Instructions

6
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Product Features
• Premium quality audio driver
• Built in Rechargeable Li-ion batteries
• Recharging base station with power / charging indicator
• 915.5MHz, 916.0MHz and 916.5MHz transmission
• Ideal for use with TV, stereo etc.
• Use as wired or wireless headphones
• Modern and lightweight ergonomic design
• Premium foam padding for extra comfort
• 50m range (open line of sight)
Audio Cable
RCA Adaptor
Power Adaptor
Audio Input
Channel SelectPower Input
Audio Input
Indicator
Charge
Indicator
Power
Indicator

7
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Technical Specications
Driver Unit: 50mm
Sensitivity: 110+/-3dB(SPL/mW.1 kHz)
Impedance: 32Ω ± 15%
Frequency Range: 20Hz-20KHz
3 channel base station
Transmission range up to 50 meters (open line of sight)
Parts List
• 1 x Base Station
• 1 x Cordless Headphones
• 1 x 3.5mm Audio Cable
• 1 x RCA Adaptor
• 1 x Power Adaptor
• 1 x Instruction Manual
• 1 x Getting Started Guide
• 1 x Warranty Card

8
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Instructions
Power On/Off
To use your Bauhn Cordless Headphones wirelessly, the base unit will require
power. You can power the base unit using the included power adaptor or by
inserting batteries. Refer to p 10 for details on using batteries with the unit.
1. Insert the jack of the power adaptor to the rear of the base unit.
2. Plug in the power adaptor to a mains outlet and switch the outlet on.
3. Move the switch on the back of the base unit to channel 1, 2 or 3.
4. The power indicator on the front of the base unit will turn red when
connected to power.
Charging
The Bauhn Cordless Headphones have a built-in rechargeable battery.
The base unit will recharge the headphones when they are docked.
1. Insert the plug of the power adaptor to the rear of the base unit.
2. Plug in the power adaptor to a mains outlet. Turn the power on at the mains
outlet.
3. The power LED on the front of the base unit will turn red when connected to
power.
4. Place the headphones on the cradle. Ensure the contacts on the base unit
and the headphones line up.
5. The charging LED on the front of the base unit will change to yellow while the
headphones are on the base station.
Note: Charge for 12 hours before rst use. You can only recharge your
headphones while connected to mains power. You cannot over charge the
headphones, it is recommended leaving the headphones on the base unit when
not in use.

9
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Connecting to your Audio Device
You can connect any audio device to the Bauhn Cordless Headphones and
listen in comfort from anywhere in the home. You could also connect the
Cordless Headphones to your TV to listen without disturbing others. You can
connect your base unit using the included 3.5mm cable or the included RCA
adaptor.
Wireless
Connect your TV, phone, Stereo or other audio device to your base unit using
the included 3.5mm cable. The base unit will transmit the
audio wirelessly to your headphones.
1. On your TV, phone, Stereo or other audio device,
locate the appropriate output plug. Generally this
will have a picture of headphones or say “Aux
Out”.
2. Connect the included audio cable to the rear of
the base unit. Plug the cable into the jack marked
audio in.
3. The audio LED on the front of the base unit will
turn green when it detects audio input.
Tip: If the green light on the base does not switch on, try increasing the
volume on your TV, Stereo or Phone. The base requires a strong input signal
to function.
Note: If your TV or Stereo does not have an appropriate 3.5mm jack, please
see the RCA connection section on page 10.
Wired Connection
The included 3.5mm audio cable is perfect for connecting to your phone or
other MP3 player using a 3.5mm plug/jack directly to your headphones.
1. Connect the included audio cable to the 3.5mm jack marked AUX-IN on
the left ear pad and the other end to your audio device.
2. Control audio play back on your device.
Note: Connecting the audio cable to the AUX-IN jack will override any
wireless or radio transmission.
HEADPHONES
Example of appropriate port

10
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
RCA connection
This adaptor is perfect for connecting to devices
with a stereo output such as a home audio system
or your TV.
1. Connect the 3.5mm end of the RCA adaptor to
the rear of the base station marked audio in.
2. Connect the red/white RCA plugs into the
device you wish to connect to. On your TV the
audio output plugs can be generally found on
the back or side and will be marked using red
and white plugs.
3. Select the correct output on your device. The LED on the front of the base
unit will turn green when it detects audio input.
Tip: If you are using the RCA adaptor, ensure that you are using an Audio Out
port on your television, not an Audio In.
Tips for Connecting to your TV:
If the green LED is not lighting up wihen connecting to your TV, try the below:
Refer to your TV manual for audio output settings. Some TVs will require
you switch on ‘surround sound’ settings or similar to activate the RCA
output jacks. Call your TV manufacturer if you are unsure of these steps.
Try turning up the volume on the TV to ensure a strong audio signal is being
received by the base unit.
RAUDIO
AUDIO OUT
L
Example of RCA port

11
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Inserting batteries
You can insert 3 x AAA batteries (not included) into the base unit to use the
Bauhn Cordless Headphones on the go.
1. Open the battery cover on the bottom of the base unit.
2. Insert 3 x AAA batteries (not included) into the battery compartment. Take
note of the polarity markings of the batteries.
3. Replace the battery cover on the base unit
Tip: When you replace the batteries as required, replace all the batteries at the
same time. Do not mix old and new batteries.
Pairing the Headphones to the Base
The Bauhn Cordless Headphones feature 3 different channels, this way you
can operate 3 different Cordless Headphone units at the same time without
interference.
1. When the base unit is powered by either batteries or directly connected to
mains power, switch on the headphones by pressing the power symbol on
the ear pad.
2. Connect the base unit to your audio device using the included cables.
The LED on the front of the base unit will turn green when it detects audio
input.
3. Select the channel you wish to use for your Cordless Headphones. The
switch used to toggle between channels 1, 2 or 3 is found on the rear of the
base unit.
4. Press the ‘S’ button on the side of the right ear pad to scan for the channel
you selected. You may need to press scan a few times to correctly tune to
the correct channel.
Selecting a different wireless channel
If you nd the audio has interference on your Bauhn Cordless Headphones, you
can switch to the other wireless channel for clearer sound.
1. Slide the Channel selector on the back of the base unit to either of the spare
channels.
2. Press the scan button on the right ear pad, you may need to press this
multiple times until the audio is clear.

12
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Question Answer
No audio is coming through the
wireless connection
- Ensure that the 3.5mm jack is plugged in
correctly and the volume is turned up.
- Double check that the audio cable is
plugged in to an output on your device,
not an input
- Try using a different audio device, to
narrow down what could be causing
the issue.
No power on charging dock - Ensure the power adaptor is plugged into
the base unit and switched on at the wall
outlet.
- If you have inserted batteries, try replacing
the batteries in case they are at.
- If you have inserted batteries, check the
correct polarity has been used.
No power on headphones - Try charging the headphones for 1hr to
ensure sufcient charge for the built in
battery
Excessive interference or noise - Try switching wireless channels by selecting
1 or 2 on the base station.
- Press ‘S’ to select the new channel.
- Move the base unit away from any cordless
phones or wireless devices
- Remove any obstacles between the
headphones and base unit.
Frequently Asked Questions

13
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Frequently Asked Questions
Question Answer
Volume buttons do not work when the
headphones are connected directly to
my audio device.
- When the headphones are connected
directly to your audio device they act as
passive wired headphones only. Change the
volume levels on your audio device to adjust
the volume.
How long do I need to recharge the
headphones?
- On the rst charge, it is recommended you
charge for a full 12 hours. On subsequent
charges, charge at least a few hours to
achieve full charge. Over-charging
your headphones is not possible when
using them with the supplied charging
cradle.
How far away from the base unit will
the headphones work?
- With no obstructions and no devices nearby
the headphones will work up to 50m away
- Walls, doors and other electrical devices
will limit the operating distance. Try
positioning the charging dock in different
locations for best results
The green LED does not light up
when I have my MP3 player or phone
connected.
- Ensure the volume on your device is set
to maximum.
I have connected my Cordless
Headphones to the headphone
output, but now the TV speakers are
not functioning.
-Connecting to the headphone jack of
most TVs will automatically disable the
TV’s speakers. To continue to enjoy the
TV speakers we recommend you use the
included RCA cable. Refer to page 10 for
further details.

14
After Sales Support - Help Desk
Telephone: [phone]
Internet: www.winplus.com.au
Notes:

Repair and Refurbished Goods
or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the Supplier for repair.
Please be aware that if your product iscapable of retaining user-generated data (such as files
stored on a computer hard drive, telephone numbers stored onamobile telephone, songs
stored on a portable media player, games saved onagames console or files stored ona USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending theproduct for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 663 907 or write to us at:
AFTER SALES SUPPORT
MODEL: HE414066 PRODUCT CODE: 47936 12/2014
1300 663 907 [email protected]
AUSYEAR WARRANTY
1
Winplus Australasia
PO BOX 537
Bayswater Business Centre
Bayswater, VIC 3153
Winplus Help Desk 1300 663 907
(Operating Hours: Mon-Fri 08:30AM to 6:00PM)
[email protected]
www.winplus.com.au
Cordless Headphones