Bauhn ASBBS-0922 User manual

User Manual
MODEL: ASBBS-0922
2.1 Channel Soundbar
with Built-In Subwoofer
AFTER SALES SUPPORT
1300 002 534
tempo.org/support
MODEL: ASBBS-0922 PRODUCT CODE: 709821 09/2022
AUS

2
Welcome
Congratulations on your purchase!
This manual tells you all you need to know about using your new BAUHN®product.
Please take special note of any important safety and usage information presented with the symbol.
All products brought to you by BAUHN®are manufactured to the highest standards of performance and safety and,
as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty.
Domestic use only: This product is intended for indoor domestic use only. It is not suitable for commercial, industrial
or outdoor use. Do not use this product for anything other that its intended purpose, and only use it as described in
this manual.
We hope you will enjoy using your purchase for many years to come.

3
Operation 18
General Operation 18
Input Modes 18
Bluetooth®19
Pairing Bluetooth®Devices 19
Bluetooth®Playback 20
Troubleshooting 21
Specications 23
Compliance and Responsible Disposal 24
Contents
Welcome 2
Unpack and Prepare 4
What's in the Box 4
Wall Mount Installation Kit 5
Installation 6
Wall Mounting Instructions 8
Connect to Power 10
Controls and Connections 11
Get to know your Soundbar 11
Buttons on the Soundbar 11
Rear Ports on the Soundbar 12
Remote Control 15
Setup 15
Using the Remote Control 16
Remote Overview 17
Warranty Information 25
Repair and Refurbished
Goods or Parts Notice 26

4 | UNPACK AND PREPARE
Before setting up your new Soundbar, check you have everything:
A. 2.1 Channel Soundbar
B. Remote Control
C. AAA Activ Energy Batteries (2)
D. 3.5mm Audio Cable
E. Optical Cable
F. Wall Mount Installation Kit
G. Power Adaptor
H. User Manual
I. Warranty Certificate
J. Quick Start Guide
K. General Safety Warnings
Unpack and Prepare
What's in the Box
You will need (not included):
• Phillips-head screwdriver and a drill (for wall mount installation)
• HDMI Cable, if you want to set up and use HDMI CEC. (Otherwise you can use the included optical cable if you
don't use HDMI.)
C
D E
K
F

UNPACK AND PREPARE | 5
The illustration below shows the contents of the wall
mount installation kit. These are the parts you will need
if wall mounting your soundbar.
A. Plastic Anchors (2)
B. Long Screws (2)
Wall Mount Installation Kit
• Place the Soundbar on a level surface.
• Place the Soundbar away from any source that
may generate heat or vibrations.
• Make sure there is enough space around the
Soundbar for airflow.
• The remote control works up to 6 metres away
from the Soundbar.
• Unplug the Soundbar before cleaning it.
• Clean using a dry cloth only - do not use water
or chemicals.
• Use only the power supply provided.
• Keep liquid, children and pets away from the
Soundbar at all times.

6 | UNPACK AND PREPARE
Installation
This soundbar can sit free-standing on a surface, or it can be mounted to a wall.
Free-standing
Place on a secure, flat surface. Make sure the soundbar
is standing on its rubber pads (on the left and right sides
on the bottom of the soundbar) and no other area of the
bottom of soundbar is touching the surface.

UNPACK AND PREPARE | 7
Wall mounted
Wall mounting instructions are on the following pages.
• Wall-mounted installation must be carried out
by qualified personnel only. Incorrect assembly
can result in severe personal injury and property
damage! If you intend to install this product yourself,
you must check for installations such as electrical
wiring and plumbing, which may be hidden inside or
behind the wall.
• It is the installer’s responsibility to verify and confirm
that the wall will safely support the total load of the
soundbar and wall brackets.
• Additional tools (not included) are required for the
installation.
• Do not overtighten screws.
• Use an electronic stud finder to check the wall type
before drilling and mounting.

8 | UNPACK AND PREPARE
760mm
Wall Mounting Instructions
Use a pencil to make drill hole marks on the
wall for the anchors. Make sure the marks are
level before drilling. Use a 6mm bit and power
drill (not supplied) to drill holes on the marks.
1

UNPACK AND PREPARE | 9
Slide the soundbar onto the screws
which are fixed to the wall. Make sure
the soundbar is secure and attached
firmly to the wall.
Insert plastic anchors into the holes and push in
until they are flush with the wall. Drive the screws
into the plastic anchors and tighten until the
screw head is approximately 3mm from the wall.
2
3

10 | UNPACK AND PREPARE
Connect to Power
Make sure the soundbar is switched off at the power
outlet until you have finished connecting your cables.
Don't forget to plug in the
soundbar to the power outlet.
Leave the power switched off until
installation is finished.