Bauhn ASBEB-0919 User manual

User Manual
MODEL: ASBEB-0919
2.0 Premium Bluetooth®Soundbar
with Enhanced Bass

2
Welcome
Congratulations on your purchase!
This manual tells you all you need to know about using your new Bauhn®product.
Please take special note of any important safety and usage information presented with the symbol.
All products brought to you by BAUHN®are manufactured to the highest standards of performance and safety and,
as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty.
We hope you will enjoy using your purchase for many years to come.

3
Operation 17
General Operation 17
Input Modes 17
Bluetooth®18
Pairing Bluetooth®Devices 18
Bluetooth®Playback 19
Troubleshooting 20
Specications 22
Compliance and Responsible Disposal 23
Warranty Information 24
Contents
Welcome 2
Unpack and Prepare 4
What's in the box 4
Important Tips 5
Installation 6
Wall mounting instructions 8
Connect to power 10
Controls and Connections 11
Get to know your Soundbar 11
Buttons on the Soundbar 11
Rear Ports on the Soundbar 12
Remote Control 14
Setup 14
Using the Remote Control 15
Remote overview 16
Repair and Refurbished
Goods or Parts Notice 25

4 | UNPACK AND PREPARE
Before setting up your new Soundbar, check you have everything:
A. Soundbar
B. Remote Control
C. 3.5mm AUX Cable
D. Optical Cable
E. Installation Kit
F. AAA Batteries
G. AC Power Cable
H. Quick Start Guide
I. Warranty Certificate
J. User Manual
You will need:
• Phillips-head screwdriver and a drill (for wall mount installation)
• HDMI Cable, if you want to set up and use HDMI CEC.
(Otherwise you can use the included optical cable if you don't
use HDMI.)
Unpack and Prepare
What's in the box

UNPACK AND PREPARE | 5
Important Tips
• Place the Soundbar on a level surface.
• Place the Soundbar away from any source that may generate heat or vibrations.
• Make sure there is enough space around the Soundbar for airflow.
• The remote control works up to 6 metres away from the Soundbar.
• Unplug the Soundbar before cleaning it.
• Clean using a dry cloth only - do not use water or chemicals.
• Use only the power supply provided.
• Keep liquid, children and pets away from the Soundbar at all times.

6 | UNPACK AND PREPARE
Installation
This soundbar can sit free-standing on a surface, or it can be mounted to a wall.
Free-standing
Place on a secure, flat surface. Make sure the soundbar
is standing on its rubber pads (on the left and right sides
of the soundbar) and no other area of the bottom of
soundbar is touching the surface.

UNPACK AND PREPARE | 7
Wall mounted
Wall mounting instructions are on the following pages.
• Wall-mounted installation must be carried out
by qualified personnel only. Incorrect assembly
can result in severe personal injury and property
damage! If you intend to install this product yourself,
you must check for installations such as electrical
wiring and plumbing, which may be hidden inside or
behind the wall.
• It is the installer’s responsibility to verify and confirm
that the wall will safely support the total load of the
unit and wall brackets.
• Additional tools (not included) are required for the
installation.
• Do not overtighten screws.
• Use an electronic stud finder to check the wall type
before drilling and mounting.

8 | UNPACK AND PREPARE
Wall mounting instructions
Fix the supplied wall-mounting
brackets (marked with "s") to the
bracket fixing holes on the back
of the soundbar with the supplied
short screws. Affix the brackets as
shown in the illustration (left).
Use a pencil to make drill hole marks on the
wall for the anchors. Make sure the marks are
level before drilling. Use a 6mm bit and power
drill (not supplied) to drill holes on the marks.
1
2
350mm
18mm

UNPACK AND PREPARE | 9
Place the soundbar with
wall-mounting brackets
(marked with "S") onto
the mounting brackets
(marked with "W"), which
are fixed to the wall. Use
the included short screws
to tighten them. Make sure
the soundbar is attached
firmly to the wall.
Insert the included plastic anchors into
the holes and push in until they are flush
with the wall. Secure the supplied metal
brackets (marked with "W") to the wall by
screwing the included tapping screws into
the anchors and tighten until the screw
head is fully inserted and flush with the
metal bracket.
4
3

10 | UNPACK AND PREPARE
Connect to power
Make sure the soundbar is switched off at the power
outlet until you have finished connecting your cables.
Don't forget to plug in the
soundbar to the power outlet.
Leave the power switched off until
installation is finished.