BCP SKY3325 User manual

SKY3325Ver. 3
Wooden Potting Bench
with Metal Tabletop
INSTRUCTION
MANUAL

•Please do not exceed the weight limitations of this item.
•Do not stand on or use any part of this item as a step ladder.
•Firmly secure all bolts, screws and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•Be aware that some parts are heavy and have sharp edges.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future reference.
2|
HARDWARE
TOOLS REQUIRED
UP TO 60 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
PHILLIPS
SCREWDRIVER
250 LBS
CAPACITY
LBS
NOTICE
DRILL
(OPTIONAL)
M4 x 25mm
SCREW
2
18 PCS
1
46 PCS
M4 x 35mm
SCREW
LATCH
6
1 SET
5
2 PCS
HANDLE
M3 x 16mm
SCREW
3
24 PCS
HINGE
4
2 PCS
HOOKS
7
1 PC

| 3
D
1 PC
SLOTTED FLOOR
PARTS
1 PC
LEFT SIDE
A
1 PC
RIGHT SIDE
B
1 PC
DOOR
F
E
1 PC
CABINET FLOOR
1 PC
MIDDLE DIVIDER
C
J
2 PCS
LONG FRAME
1 PC
CABINET BACK
G
1 PC
DRAWER
H
1 PC
DRAWER SUPPORT
L
K
2 PCS
UPPER SIDE FRAME
1 PC
BENCH TOP
I

P
1 PC
SHELF BACK I
PARTS
1 PC
BACK SUPPORT
M
1 PC
CABINET SUPPORT
N
Q
1 PC
SHELF BACK II
2 PCS
SHELF
O
4|
PRODUCT ASSEMBLY
1Attach part A left side and part C middle divider to part D slotted floor with four part 1 screws.
D
A
C
1x4

| 5
PRODUCT ASSEMBLY
2
3Attach part E cabinet floor and part B right side with eight part 1 screws.
Attach two part J long frames with eight part 1 screws.
1x8
1x8
Jx2
B
E
SIDE VIEW

PRODUCT ASSEMBLY
4Attach part L drawer support and part M back support with six part 1 screws.
6|
1x6
M
L

| 7
PRODUCT ASSEMBLY
5Attach part G cabinet back and part N cabinet support with eight part 1 screws.
Attach a part 5 handle to the part H drawer with four part 3 screws.
Slide in the drawer.
3x4
1x8
5
G
H
N

PRODUCT ASSEMBLY
6Attach two part 4 hinges to the part F door and frame with eight part 3 screws.
Attach a part 5 handle with four part 3 screws.
Attach the part 6 latch set with six part 3 screws.
8|
3x6
3x4
5
6
4x2 3x8
F

| 9
PRODUCT ASSEMBLY
7Attach part I bench top with four part 1 screws.
Attach two part K upper side frames with six part 2 screws.
1x4
I
2x6
Kx2

PRODUCT ASSEMBLY
8Attach two part O shelves with eight part 1 screws.
10 |
1x8
Ox2