BDI STREAM 1643 Installation guide

Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a BINK
table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Stream table collection is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Stream is engineered for easy assembly. Carefully follow this procedure
to prevent any damage. Do not use power tools for assembly of this
product.
Step 1
Unpack and identify the parts listed. Open boxes, but DO NOT
REMOVE SHELVES. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact
BDI Customer Service at: [email protected].
For all other concerns, please contact your BDI retailer.
bdiusa.com
customerservic[email protected]om
Designed by Cristian Wicha.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Stream & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 08.25.2016 V2
STREAM™
1642/1643/1646
TABLE COLLECTION
T1 Allen Wrench x 1
A Glass Top x 1
All Glass x 2
B Metal Leg x 2
C Lower Wood Shelf x 1
H1 Socket Screw x 4
All Glass x 8
H2 Long Socket Screw
x 4

bdiusa.com
customerservic[email protected]om
STREAM
TABLE COLLECTION
2
Step 3 - Attach Wood Top
Carefully rotate 90 degrees so that the table is resting on its side on a non-marring surface. For easiest
installation find a paperback book about 1” thick and place on floor between Metal Legs B as shown below,or
find non-abrasive materials to temporarily cover inside edge of legs.
Carefully slide Lower Wood Shelf C into place being careful not to bump the Metal Legs B. Rest the Lower
Wood Shelf C on the book and attach using the Long Socket Screw H2 and Allen Wrench T1.
Paperback book
1” thick
Step 2 - Attach Legs to Glass Top
Using the illustration as a guide, attach the Metal Legs B to the Glass Top A as shown using the Socket
Screw H1 and Allen Wrench T1. This should be done BEFORE removing top from the box so that Glass Top
Ais not scratched prior to assembly.