Beat-Sonic Altezza & Gita SLA-91 User manual

H/U
H/U
Panel
Panel
Bolts（4）
Clips (2)
Clips (4)
Screws (2 )
Acccase
ACVentPanel
OEMAudioUnit
Bolts（4）
Mount all components in locations that will not inhibit safe driving or obstruct motions of various
components of the vehicle functions. Be cautious not to damage wires, piping, tanks and other
areas as installed in the vehicle. Avoid wet, dusty or areas of extreme temperatures for installation.
Damagesresultingtothevehicleofaftermarketaudiosystemasresultofinproperinstallationsor
carelessinstallationarenotcoveredbyanywarranty,norareweresponsibleforanyinjuriesor
damagesresultingfromtheinstallationprocess.Pleaseobservecautionwhenperforminginstallation.
Make sure that the original audio head unit and sound systems are in working order.
This kit is not designed to resolve issues that existed before installation.
LexusIS300w/PremiumSound
CarModel ModelYear ModelChassisCode
2002-2005
SXE10、GXE10 、JCE15W、JCE10W 、GXE10W
１．Allowplugandplayinstallationofanaftermarketaudiosystem.
１．Fronttorearspeakerfaderwillbedisabled.
２．Someaftermarketsystemsmaysoundaslightpoppingnoiseuponfirstpowering
uptheaudiosystem.
*Always disconnect the negative terminal of the vehicle battery before installation.
*Protect all wires that must be located near sharp metal parts of the vehicle.
*Check after installation that all vital features such as wipers, lights, brake lamps, etc
are in working order in addition to the installed systems.
Installation 2DIN - 40mm Width x 25mm Height x 82mm Depth Weight: 250g Brackets, Dash Pieces and Adapter
OEM Toyota dash panel, SLA-91 adapter, installation manual
RemovetheACventpanel.
Accessorypanelisremoved
OEMAudiounitisremoved。
（4clipsand2screws)
Attachthefactorycarriermainbracketsasshown
using6screwsoneachsidesuppliedbytheaftermarket
headunit.
（2clips）
（4Bolts）
1.
1.
Installtheaftermarketheadunittothe
appropriatelocationasshown
reusingfactory4bolts.
2.
Mountthedashpieceincludedwiththekitasshown.
3.
Doublechecktomakesurethenewdashpieceisconnectedsecurely.
4.
2.
3.
TRC（SNOW）Button
NO:000003
AdditionalNotes
Thedashpanel(includedwiththekit)
ismountedasshownontheright.
Payspecialattentiontothe
mountingpointascircledtotheright. TopView
SLA-91InstallationManual
LexusIS300w/PremiumSound
ThankyouforyourpurchaseofBeat-SonicSoundAdapterSLA-91.
Pleasereadthefollowinginstructionscarefullyduringinstallationandoperation.
・
.1Removaloftheoriginalheadunit
.3Installationofaftermarketaudioheadunit .2
.4Testingthenewaudiosystem.
Checkthatallcomponentsfunctionaswellasallelectrialfunctionsofthevehicle.
Amplier Remote Wire
Dependingonthe
manufacturerormodelof
theaftermarketradio,the
referenceandnamesofthe
AmplifierRemoteTrigger
Wiremaydiffer.Pleaserefer
totheinstructionsas
providedbytherespective
audiounittobeinstalled.
Features
Precautions
PrecautionsforInstallationProcedures
Dimensions
Package Contents
MakeALLofthefollowing
connectionsforproperoperation.
*If the aftermarket radio does not come with an amplier
remote wire, connect to the acc power.
Bracketー(L)
Bracketー(R)
Includedwiththekit
ネジ（6）
＆
TRC
OFF
*If equipped, please installal the appropriate
button as shown.
20 Pin
Connector 20PinOEM
Connector
Black/NegativeGround(-)
FrontspeakerOutputs
Orange/IlluminationDimmer
Blue/AntennaRemote
Yellow/BatteryConstant(+)
Red/IgnitionPowerACC(+)
Blue/White/AmplifierRemoteTrigger(+)
SLA-91
Aftermarket Head Unit
STEREO DASH KITS
BEAT-SONIC STEREO INSTALLATION COMPONENTS
All manuals and user guides at all-guides.com