Bebob AS2MICRO User manual

bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: [phone]
www.bebob.de
Juni 2019
Features
•2 Channel AMount simultaneous Li-Ion Charger.
•AC Adapter. 16,8V – 5.0A DC Dtap (male) Output
•Powerbase Mode.
Charging
•Plug the blue Dtap Plug of the S1micro in the blue Twist Dtap Socket of the Powerbase-Amicro.
•The S1micro led indicator show green when the charger is plugged in with no battery connected
•The Channel Status indicator turns red when a battery is placed on the corresponding channel
and the charging process has begun
•The Channel Status indicator turns back green when the battery is fully charged
AC Adapter S1MICRO
•You can use your S1micro AC Adapter (Part of the Kit) as a 1 Channel Travel Quick
Charger
•Plug the Blue Dtap in theTwist Dtap Socket on any bebob battery (but Bmount)
•The AC adapter delivers up to 5,0A under 16,5V
AS2MICRO Portable simultaneous li-ion
battery charger
User Manual
WE STRONGLY RECOMMEND THAT YOU
READ THIS INSTRUCTION BEFORE USING
YOUR BEBOB AS2MICRO CHARGER!
PLEASE KEEP THIS MANUAL FOR FUTURE
REFERENCE

bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: [phone]
www.bebob.de
Juni 2019
Powerbase
•Plug off the S1micro from the Powerbase-Amicro
•Place one or two full batteries on the Powerbase
•Battery Power will be available over the black twist Dtap Socket
•Maximum Load depends on the batteries and limited to 10A
Safety instructions
•Only for professional use! Keep Charger out of reach of children and personnel that has
not been instructed in the use!
•Use only with recommended batteries.
•Keep the charger dry and do not immerse in water.
•Do not cover the charger under use
•Do not keep in contact with any part of the body while the charger is in working status.
•Do not use or store the charger in unstable, dusty or damp environments.
•Remove the battery from the charger after the charging process is complete.
•Do not attempt to open or repair the charger. Contact your dealer for help if it becomes
defective.
•Handle with care! Do not throw! Do not drop!
Warranty
•The AS2micro is covered by a 2 years unconditional warranty on all parts.
•For warranty issues or if you have any additional questions, please contact the appropriate
bebob distributor listed at www.bebob.de.
Specifications
Model
AS2micro
Mount
Amicro
Channel
2 simultaneous
Charging current
16,8V 2.5A per Channel 5,0A global
AC In
90-264V/47-63Hz 100W
Weight AC Adaptor
0,365 Kg
Dimensions (WXHXD)
40 x 138x 60mm
Weight Powerbase
0,160 Kg
Dimensions (WXHXD)
96 x 66x 45mm
Batteries
bebob
Charging time
depends on the battery capacity
Operating Temp. Range
- 10°C ~ + 35°C