Bebob VS2-RL User manual

bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: [phone]
www.bebob.de
August 2020
VS2-RL Portable simultaneous li-ion battery
charger
User Manual
WE STRONGLY RECOMMEND THAT YOU
READ THIS INSTRUCTION BEFORE USING
YOUR BEBOB VS2-RL CHARGER! PLEASE
KEEP THIS MANUAL FOR FUTURE
REFERENCE
Features
•2 Channel V-Mount simultaneous Li-Ion Charger.
•Built-in AC Adapter. 16,5V – 5.0A DC XLR4 Output
•Powerbase Mode.
Charging
•Never leave batteries unattended while charging
•All Channel Status indicator show green when the charger is turned on with no battery
connected
•The Channel Status indicator turns red when a battery is placed on the corresponding channel
and the charging process has begun
•The Channel Status indicator turns back green when the battery is fully charged
•The Channel Status indicator turns Yellow when a battery is placed on the corresponding
channel and the charging process fails for damage or safety reason.
•Cooling fan will be activated during the charging process
•Simultaneous Fast Charging for Vmount batteries Hardware 7.9x or lower and Vcine batteries
HW7.9x or lower
•Super Fast simultaneous/sequential Charging for Vmicro batteries, Vmount batteries Hardware
8.x or higher, VCine batteries Hardware 8.x or higher - Left Channel Super Fast Charging up to
85% then Simultaneous Fast Charging Left and Right Channel

bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: [phone]
www.bebob.de
August 2020
AC Adapter
•You can use your VS2-RL either as an AC Adapter or as a charger. Both functions aren´t
possible simultaneously
•The charging functions always has priority
•The AC adapter delivers up to 5,0A under 16,5V
Powerbase
•Plug off the AC Cord from the charger
•Place one or two full batteries on the charger
•Battery Power will be available over the XLR 4 DC Output.
•Maximum Load depends on the batteries
Safety instructions
•Only for professional use! Keep Charger out of reach of children and personnel that has
not been instructed in the use!
•Use only with recommended batteries.
•Keep the charger dry and do not immerse in water.
•Do not cover the charger under use
•A standard three-pin AC plug must be used and earth pole must be connected to the earth line.
•Do not keep in contact with any part of the body while the charger is in working status.
•Do not use or store the charger in unstable, dusty or damp environments.
•Remove the battery from the charger after the charging process is complete.
•Do not attempt to open or repair the charger. Contact your dealer for help if it becomes
defective.
•Handle with care! Do not throw! Do not drop!
Warranty
•The VS2RL is covered by a 2 years unconditional warranty on all parts.
•For warranty issues or if you have any additional questions, please contact the appropriate
bebob distributor listed at www.bebob.de.

bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: [phone]
www.bebob.de
August 2020
Specifications
Model
VS2-RL
Mount
V-Mount
Channel
2 simultaneous
Charging current
16,8V 2.5A
DC Output
16.5V 5.0A
DC Port
XLR4 1 minus 4 plus
AC In
90-264V/47-63Hz 100W
Weight
1,0 Kg
Dimensions (WXHXD)
110 x 231x 141mm
Batteries
bebob, idx, sony
Charging time (bebob VS2/VS4)
depends on the battery capacity
Operating Temp. Range
- 10°C ~ + 35°C