Beko 01M-8833953200-2417-01 User manual

www.beko.it
HBS7750X
01M-8833953200-2417-01
Hand Blender
User Manual
EN

Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best re-
sults from your product which has been manufactured with high quality and
state-of-the-art technology. Therefore, please read this entire user manual
and all other accompanying documents carefully before using the product
and keep it as a reference for future use. If you handover the product to
someone else, give the user manual as well. Follow all warnings and informa-
tion in the user manual.
Meanings of the symbols
Following symbols are used in the various section of this manual:
C
Important nformaton and useful
hnts about usage.
A
WARNING: Warnngs for dangerous
stuatons concernng the safety of
lfe and property.
Do not mmerse the applance n
water.
Protecton class for electrc shock.
Ths product has been produced n envronmentally-frendly, state-of-the-art facltes.
It does not contan PCB.
Made n P.R.C
Ths applance conforms to the WEEE
regulaton.

3 / EN
Hand Blender/User Manual
CONTENTS
1 Important safety and
environmental instructions 4
1.1 General safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.2 Complance wth the WEEE Drectve and
Dsposng of the Waste Product: . . . . . . . . . . . . . . 7
1.3 Complance wth RoHS Drectve . . . . . . . . . . . 7
1.4 Package nformaton . . . . . . . . . . . . . . . . . . . . . . . 7
1.5 Thngs to do for energy savng . . . . . . . . . . . . .8
1.6 Plug Wrng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2 Your Hand Blender 10
2.1 Overvew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2.2 Techncal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3 Operation 11
3.1 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2 Intal use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.3 Blendng and choppng wth the blendng
shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4 Cleaning and care 13
4.1 Cleanng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
4.2 Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
4.3 Handlng and transportaton. . . . . . . . . . . . . .13

4 / EN Hand Blender/User Manual
Ths secton contans safety nstructons that wll
help protect from rsk of personal njury or property
damage.
Falure to follow these nstructons nvaldates the
granted warranty.
1.1 General safety
•Ths applance comples wth the nternatonal
safety standards.
•Ths applance may be used by chldren and the
people whose physcal, perceptve or mental sklls
are mpared or who are nexperenced or not
knowledgeable about the applance as long as they
are supervsed or nformed and made understood
the safe use of the applance and the encountered
dangers. Chldren should not play wth the applance.
•Ths applance shall not be used by chldren.
•Keep the applance and ts cord out of the reach of
chldren.
•Do not use t f the power cable, blades or the
applance tself s damaged. Contact an authorsed
servce.
1 Important safety and
environmental instructions

5 / EN
Hand Blender/User Manual
•Only use the orgnal parts or parts recommended
by the manufacturer.
•Do not attempt to dsmantle the applance.
•Your mans power supply should comply wth the
nformaton suppled on the ratng plate of the
applance.
•Do not use the applance wth an extenson cord.
•Do not pull the power cable when unpluggng the
applance.
•Wat for movng accessores to stop and unplug
the applance when left attended, whle nstallng/
removng accessores or before cleanng.
•Do not touch the plug of the applance wth damp
or wet hands.
•Do not use the devce for hot food.
•To prevent overheatng, do not use the applance
contnuously for more than10 seconds. Leave to
cool for 1 mnute n between each 10 seconds of
operaton.
•Use the applance only wth the suppled rubber
base and glass contaner.
1 Important safety and
environmental instructions

6 / EN Hand Blender/User Manual
•Do not operate the applance wthout the
ngredents n the bowl.
•Remove bones and stones from food to prevent the
blades and the applance from gettng damaged.
•Ths applance s not sutable for dry or hard foods
as ths wll quckly cause the blades to become dull.
•Follow all warnngs to prevent njures due to
ncorrect use.
•When emptyng the contaner, durng cleanng and
grabbng choppng blades wth bare hands serous
njures could result due to ncorrect use. Use the
plastc secton tryng to hold the choppng blade.
•After cleanng, dry the applance and all parts
before connectng t to mans supply and before
attachng the parts.
•Do not mmerse the applance, power cable, or
power plug n water or any other lquds.
•Do not operate or place any part of ths applance
or ts parts on or near hot surfaces.
•If you keep the packagng materals, store them out
of the reach of chldren.
1 Important safety and
environmental instructions

7 / EN
Hand Blender/User Manual
1.2 Compliance with the WEEE Directive and
Disposing of the Waste Product:
This product complies with EU WEEE Directive (2012/19/EU). This product
bears a classification symbol for waste electrical and electronic equipment
(WEEE).
This product has been manufactured with high quality parts
and materials which can be reused and are suitable for
recycling. Do not dispose of the waste product with normal
domestic and other wastes at the end of its service life. Take it
to the collection center for the recycling of electrical and
electronic equipment. Please consult your local authorities to learn about
these collection centers.
1.3 Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive
(2011/65/EU). It does not contain harmful and prohibited materials
specified in the Directive.
1.4 Package information
Packaging materials of the product are manufactured from
recyclable materials in accordance with our National
Environment Regulations. Do not dispose of the packaging
materials together with the domestic or other wastes. Take
them to the packaging material collection points designated by the local
authorities.
1 Important safety and
environmental instructions

8 / EN Hand Blender/User Manual
1 Important safety and
environmental instructions
1.5 Things to do for energy saving
Follow the tmes recommended n the manual durng use. Unplug the
applance after use.
1.6 Plug Wiring
The moulded plug on ths applance ncorporates a 13 A fuse. Should the
fuse need to be replaced an ASTA approved BS1362 fuse of the same
ratng must be used. Do not forget to reft the fuse cover. In the event of
losng the fuse cover, the plug must not to be used untl a replacement
fuse cover has been ftted. Colour of the replacement fuse cover must be
the same colour as that vsble on the pn face of the plug Fuse covers are
avalabe from any good electrcal store.
•
Fiting a different plug
•As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals on
your plug, proceed as follows:
•Brown cable = L (Live)
•Blue cable = N (Neutral)
•Green/yellow cable must be connected to ground (E) line

9 / EN
Hand Blender/User Manual
1 Important safety and
environmental instructions
•With the alternative plugs a 13 A fuse must be fitted either in the plug
or adaptore or in the main fuse box. If in doubt contact a qualified elec-
trician.

10 / EN Hand Blender/User Manual
2.1 Overview
The values whch are declared n the markngs affxed on your product or the other prnted documents suppled wth t
represent the values whch were obtaned n the laboratores pursuant to the pertnent standards. These values may vary
accordng to the usage of the applance and ambent condtons.
2Your Hand Blender
1. Blendng shaft
2. Speed adjustment button
3. Operatng swtch
4. Motor unt
5. Measurng beaker
6. Non-slp rubber base (cover)
2.2 Technical data
Voltage:
220-240 V~,
50/60 Hz
Power:
750 W
Techncal and desgn modfcatons
reserved.
1
2
3
4
5
6

11 / EN
Hand Blender/User Manual
3Operation
3.1 Intended use
Ths applance s ntended only for
household use; t s not sutable for
professonal use.
It s desgned for choppng and
whskng small amounts of sold
food only.
3.2 Initial use
1. Clean the applance parts before
ntal use (see 4.1).
2. Use the applance uprght on
a balanced, flat, clean, dry and
non-skd surface.
3. Do not use the applance
contnuously for more than 10
seconds. Turn off the devce
when used for more than 10
seconds and wat for 1 mn.
before operatng agan.
C
When you do not
exceed 10 seconds
n ntermttent uses,
you can operate the
applance untl the
end of the process by
watng for a couple
of seconds.
3.3 Blending and
chopping with the
blending shaft
1. Insert blendng shaft (1), by alg-
nng ( ) symbol on motor unt
(4) wth ( ) symbol and turnng
clockwse.
–Make sure ( ) symbol s
algned wth ( ) symbol. Ft t
nto ts place, do not apply too
much force.
2. Put processed ngredents (n
small peces) n measurng con-
taner or a contaner that you
wll use.
3. Immerse blendng shaft (1) nto
the contaner.
4. Plug n the applance.
5. Run the applance by pressng
operaton button (3).

12 / EN Hand Blender/User Manual
C
Turn speed adjust-
ment button (2) to
gradually ncrease
speed.
C
Start mxng n
low speed whle
mxng ngredents.
Ingredents may
be spattered when
you start wth hgh
speed.
C
You can get better
results f you make
crcular movements
wth the applance
durng processng.
6. Release the operaton swtch
when the operaton s fnshed.
Unplug the applance and wat
for t to stop completely.
7. Turn blendng shaft (1) coun-
terclockwse and remove from
motor unt (4) when t s algned
wth ( ) symbol.
AWARNING:
Do
not touch the blades
wth your bare hands.
3Operation

13 / EN
Hand Blender/User Manual
4Cleaning and care
4.1 Cleaning
A
WARNING:
Never
use gasolne, sol-
vent, abrasve clea-
nng agents, metal
objects or hard brus-
hes to clean the app-
lance.
1. Unplug the applance before
cleanng.
2. Make sure the applance s at
complete stop and remove
blendng shaft.
3. Wpe applance motor unt (4)
wth a damp cloth.
4. Chopper blade can be was-
hed usng a sponge and dsh-
washng detergent.
5. Dry all parts of the applance af-
ter cleanng.
AWARNING:
Do not
wash the blendng
shaft n dshwasher.
A
WARNING:
Never
mmerse nner part
of blendng shaft,
the motor unt or
power cable n water
or n any other lqud.
4.2 Storage
•If you do not intend to use the
appliance for a long time, store it
carefully.
•Unplug the appliance before lift-
ing it.
•Store the appliance in a cool and
dry place.
•Keep the appliance and cable out
of the reach of children.
4.3 Handling and
transportation
•During handling and transpor-
tation, carry the appliance in its
original packaging. The packag-
ing of the appliance protects it
against physical damages.
•Do not place heavy loads on the
appliance or the packaging. The
appliance may be damaged.
•Dropping the appliance may ren-
der it non-operational or cause
permanent damage.

11 / AR
4
4.1
A
1
4
4
A
A
4.2
•
•
•
•
4.3
•
•
•

10 / AR
3
6
71
4
A

9 / AR
3.1
3.2
1
10
10
C
10
3.3
11
4
1
4
C
C
C
3

8 / AR
2.1
2
1
4
6
2.2
1
4
6

7 / AR
1
1.5
•
•
•L
•N
•E
•

6 / AR
1
•
•
•
•
WEEE1.2
WEEE
1.3
1.4

5 / AR
•
•
•
•10
10
•
•
•
•
•
•
•
•
1
This manual suits for next models
1
Table of contents
Languages:
Other Beko Blender manuals

Beko
Beko HBS7750X User manual

Beko
Beko HBA7752X User manual

Beko
Beko TBN 7802 DX User manual

Beko
Beko 01M-8832833200-5015-01 User manual

Beko
Beko HBS7600W User manual

Beko
Beko 01M-8813893200-2518-01 User manual

Beko
Beko 01M-8833963200-1847-05 User manual

Beko
Beko HBS5550W User manual

Beko
Beko TBN 30848 X User manual

Beko
Beko SMM888BX User manual

Beko
Beko TBP5300 User manual

Beko
Beko TBN7400W User manual

Beko
Beko HBS6700W User manual

Beko
Beko HBA7608W User manual

Beko
Beko HBS7600W User manual

Beko
Beko TBN 81808 BX User manual

Beko
Beko BKK 3020 HB User manual

Beko
Beko 01M-8834013200-3216-04 User manual

Beko
Beko HBA 81762 BX User manual

Beko
Beko TBS8154R User manual