10 / EN Toaster / User Manual
Packaging materials of the product are
manufactured from recyclable materi-
als in accordance with our National
Environment Regulations. Do not dis-
pose of the packaging materials together with the
domestic or other wastes. Take them to the pack-
aging material collection points designated by the
local authorities.
2
C
When using the appliance for the
first time, smoke can develop due
to production residues. However,
this does not mean the appliance is
defective. The first time you switch
it on use the appliance as you nor-
mally would but without bread. It is
recommended to use the medium
setting of the browning control (3).
Ensure for proper room ventilation.
C
Pushing 1 from the browning control
(3) will give the lightest degree of
browning and pushing 7 the darkest.
C
To cancel the toasting process
before it has finished, press the
stop button (6). The start lever (2)
springs back up and the toast slices
can be taken out of the toaster.
C
After the start lever (2) springs back
up, you can use the high-lift function
by pushing the start lever (2) upwards.
A
WARNING:
Be very careful when
taking the toast slices out of the
toaster as the metal parts of the
toaster and also the bread can be-
come very hot.
C
If toast slices get stuck in the toaster,
switch the toaster off immediately
by pressing the stop button (6). Pull
the power plug out of the wall socket.
Let the toaster cool down completely.
Carefully try to take the bread out of
the toaster without damaging the
sensitive heating elements and other
parts. Do not use any electroconduc-
tive objects to remove the bread from
the toaster.
A
WARNING:
Be very careful when
taking the toast slices out of the
toaster as the metal parts of the
toaster and also the bread can be-
come very hot.
C
Do not toast bread and warm up
buns at the same time.
C
Do not warm up toast slices on the
warming rack (9). The toast slices
hinder sufficient ventilation.
C
If you accidentally activate the wrong
mode (defrost instead of reheat or
reheat instead of defrost), then the
selected mode must be cancelled
first by pressing the stop button (6)
before you can select the right mode.
