Belkin F1DG102D User manual

System Requirements
Monitor
Flip DVI-D supports DVI monitors, including Apple Cinema Display®
monitors, and supports both single-link and dual-link video modes.
Flip DVI-D does not support analog monitors or video cards (VGA).
Keyboard/Mouse
Flip fully supports a Mac® or PC keyboard and mouse with a USB
connection, including all special-function keys.
Computers
Flip DVI-D can be used with any Mac or PC desktop or notebook
computer that supports DVI monitors and USB keyboard and mouse
connections, and that runs on one of these operating systems:
• Mac OS® X v10.3 and above
• Windows® 2000, XP, 2003, VistaTM
• Linux® *
*Switching can only be performed using the Flip button.
Package Contents
• Remote
• KVM Switch with Cables
• Audio Extension Cable
• 5V, 2.6A Power Adapter
Introduction
Congratulations and thank you for purchasing Flip. Flip is easy to
set up and use, and comes with everything you need to share one
monitor, keyboard, mouse, and one set of speakers between your two
computers. No additional cables or software are required.
The diagram below shows a typical Flip setup. The remote sits on your
desk and connects—along with your monitor, keyboard, mouse, and
speakers—to the KVM Switch. The Switch is connected to your two
computers using the included cables.
Installing your Flip
Before you begin, make sure that your USB keyboard and mouse work
properly with both computers, and that both computers are powered
on. However, the monitor must be powered off.
1. Connect your monitor, keyboard, mouse, and speakers to the
Switch. Then, connect the remote to the base. Place the remote
anywhere on your desk.
2. Connect the power adapter to the KVM Switch and plug it into a
power outlet.
Package Contents/Introduction 1 System Requirements 2 Installing your Flip 3 Installing your Flip 4
3. Connect one set of cables to the monitor, USB, and speaker ports
on your fi rst computer. Wait for your computer to recognize the
new USB device (Flip). Then connect the other set of cables to the
monitor, USB, and speaker ports on your second computer. If the
cable is not long enough to connect to your speaker port, use the
included audio extension cable.
4. Power on the monitor.
You are now ready to use your Flip.
Installing your Flip 5
DVI-D connection
USB connection
Flip Tip:
Keep the KVM Switch behind your computers
to keep your desk free of cable clutter.

User Guide F1DG102D
Using your Flip
When you power up your computers, your first computer’s desktop will
appear on your monitor. You are now ready to use that computer as if
it were directly connected to your monitor, keyboard, mouse,
and speakers.
To flip access to your other computer, simply press the remote. Your
other computer’s desktop will appear on your monitor. You are now
ready to use your other computer as if it were directly connected to
your monitor, keyboard, mouse, and speakers. Press the remote each
time you want to flip access from one computer to the other
Optional Software
You can install software onto your computers that will allow you to
flip between computers using a desktop icon or keyboard hot-key
sequence. The software will also allow you to listen to music files
on one computer while you work on the other. To download the free
software, please visit our website at www.belkin.com/flip.
The software can be used with computers that run on one of these
operating systems:
• Mac OS X v10.3 and above
• Windows 2000, XP, 2003, Vista
Note: For a list of frequently asked questions and troubleshooting tips,
please visit our website at www.belkin.com/flip.
Belkin Tech Support
US: 310-898-1100, ext. 2263
800-223-5546, ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 800 616 1790
Europe: www.belkin.com/support
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
[phone]
[phone] fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
[phone]
[phone] fax
Belkin Ltd.
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
[phone]
[phone] fax
© 2007 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed. Mac, Mac OS, and Apple Cinema Display
are trademarks of Apple Inc., registered in the U.S. and other countries. Windows and Vista
are either registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
FCC Statement/Warranty 7
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 501 West Walnut Street, Compton CA 90220, declare
under our sole responsibility that the product F1DG102D, to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the F1DG102D, to
which this declaration relates, is in conformity with Emissions Standard EN55022 and with
Immunity Standard EN55024, LVP EN61000-3-2, and EN61000-3-3.
ICES
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique
de la classe B est conforme á la norme NMB-003 du Canada.
Belkin International, Inc., Limited 3-Year Product Warranty
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product
that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for three years.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge (except for
shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to Belkin for
inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines
that the Belkin product has been improperly installed, altered in any way, or tampered with.
The Belkin Product Warranty does not protect against acts of God (other than lightning) such
as flood, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion,
obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags),
non-authorized program, or system equipment modification or alteration.
Using your Flip/Optional Software 6 P75374
Flip DVI-D
How to get service.
To get service for your Belkin product you must take the following steps:
1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA 90220, Attn:
Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be
prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2. Your Belkin Customer Service Representative will then instruct you on how to forward
your receipt and Belkin product and how to proceed with your claim.
Belkin reserves the right to review the damaged Belkin product. All costs of shipping the
Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin
determines, in its sole discretion, that it is impractical to ship the damaged equipment to
Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect
and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment
to and from such repair facility and of such estimate shall be borne solely by the purchaser.
Damaged equipment must remain available for inspection until the claim is finalized.
Whenever claims are settled, Belkin reserves the right to be subrogated under any existing
insurance policies the purchaser may have.
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO
OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED,
INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,
ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT,
CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST
BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have other rights, which
may vary from state to state. Some states do not allow the exclusion or limitation of
incidental, consequential, or other damages, so the above limitations may not apply to you.
Warranty 8
Flip DVI-D