BEMIS bioBidet A1 User manual

User Manual
A1 Bidet Sprayer

3
TABLE OF
CONTENTS
PRODUCT INFORMATION
Product Installation..................................................4
Parts.................................................................................5
PRODUCT INSTALLATION
Pre-Installation...........................................................6
Installation....................................................................7
PRODUCT OPERATION
Operation......................................................................12
WARRANTY
Warranty.......................................................................14

4 5
FEATURES PARTS
•High quality ceramic valve
•Dual Sprayer
•6” Comfortable handle body
•Easy D.I.Y. installation
•Ambient temperature bidet wash
•Adjustable water pressure
•58” Metal spiral hose
•No electricity or batteries required
•One year warranty

6 7
PRE-INSTALLATION INSTALLATION
CAUTION:
Do not over tighten any connections. Over tightening connections
can cause damage to the parts and cause leaking.
NOTICE:
Observe all local plumbing, electrical, and building codes.
When installing this unit, be sure that the water supply valve
is fully turned off. Failure to do so can result in flooding and
water damage.
1. Shut off the water
supply to the toilet.
•Flush the toilet to drain
all water inside the tank.
•Attach the 7/8” T-valve
shutoff to the threaded
fill valve on your toilet.
Be sure the 7/8” flat
washer is in the T-valve
before installing. Position
the T-valve so that the
shuttoff handle is facing
the front of the toilet.
2. Disconnect the supply
line from the toilet
fill valve.

8 9
INSTALLATION (CONT.)
3. Reattach your existing
toilet supply line.
•Reattach your
existing toilet supply
line to the bottom of
the T-valve. Be sure
all connections are
secure, and no leaking
or water is present.
4. Remove protective
plastic covers.
•Remove protective
plastic covers on
threaded caps from the
ends of the 48” stainless
steel supply hose. Attach
the hex-head end of the
hose to the T-valve.
NOTICE
This device is designed for connection to a cold water source
with a pressure of 20-80 psi.
5. Attach the Handheld Bidet to the
other end of the supply hose.
6. Mounting Spray
Option 1: Toilet Mount
Option 2: Wall mount
•As a precaution, slide the level
on the handheld bidet sprayer
to “off,” which is away from the
sprayer head.
•Carefully remove toilet lid and
place holder in desired location.
•Using a Philips screwdriver,
remove the plastic toilet clip.
Find desired location on the
wall near your toilet. Use the
included screw to attach the
holster to the wall.
•Make sure to use an
expanding nut if you are
attaching to dry wall.

10 11
7. Turn on the water supply valve.
•Turn on the water supply valve on the back wall and check
for any leaks. Use common plumbers tape if necessary on any
leaking threads, reattach and test again. Carefully remove
toilet lid and place holder in desired location.
INSTALLATION (CONT.)

12 13
Short Term Non-Use
It is highly recommended that the water supply
valve is turned off when not in use.
NOTE:
If any leaks occur, check all rubber washers and make sure
all connections are tight and secure. If leaking persists,
discontinue use of the unit, turn off the water source and
contact [email protected]om.
OPERATION
How To Use
•Open the T-valve to allow water to flow to the
Handheld Bidet Sprayer.
•Direct the Handheld Bidet to the appropriate area and
slide the lever to the “on” position.
•When finished, slide the lever to the “off” position and
close the T-valve.
NOTE: THE T-VALVE MUST BE SHUT OFF
AFTER EACH USE.
Failure to turn off after each use may cause flooding and water
damage. BBC Innovation LLC is not responsible for damage that is
caused by failure to follow this instruction.
Cleaning the A1
Your A1 is made with a higher grade fire-retardant ABS resin. Using
harsh cleaning chemicals can weaken the material causing it to
damage and develop cracks.
•Clean the A1 by wiping the surface area with a damp
cloth regularly.
•Do not use harsh detergents or any cleaning tools with bristles
on your bidet.
•Steam cleaning is the preferred cleaning method for your
bidet. For a deep chemical free clean, consider the Bio Mist
Bidet Cleaner.

14 15
No implied warranty, including any implied warranty of
merchantability or fitness or a particular purpose, applies
to BBC Innovation LLC bidet after the applicable period of the
express limited warranty stated above, and no other express
warranty or guaranty, except as mentioned above, given by
any person or entity with respect to Bio Bidet shall bind Bio
Bidet, (some states and provinces do not allow limitations on
how long an implied warranty, so the above limitation may
not apply to you). BBC Innovation LLC shall not be liable for
revenues or profits, inconvenience, expense for substitute
equipment or service, or any other special, incidental or
consequential damages caused by the use or misuse of, or
inability to use, Bio Bidet regardless of the possibility and
foresee-ability of such damages. In no event shall recovery of any
kind against BBC Innovation LLC be greater in amount than the
purchase price of the product and causing the alleged damage.
Without limiting the foregoing, you assume all risk and liability
for loss, damage, or injury to you and your property and to others
and their property arising out of use or misuse of, or inability
to use, the Bio Bidet not caused directly by the negligence or
BBC Innovation LLC. This limited warranty shall not extend to
anyone other than the original purchaser of the Bio Bidet.
WARRANTY
Your Bio Bidet is warranted against defects in materials
or workmanship for one (1) year from the date of original
purchase. Defective parts or a defective product returned to
Bio Bidet will be repaired with new or comparable rebuilt
parts or exchanged for a Refurbished Bio Bidet as determined
by Bio Bidet in their sole discretion.
This Iimited warranty given by Bio Bidet covers all defects
encountered in normal use of Bio Bidet, and do not apply
in the following cases:
1. Loss of or damage to Bio Bidet due to abuse, misuse,
tampering, mishandling, improper packaging by you,
alteration and failure follow operating instructions.
2. Use of parts or supplies (other than those by Bio Bidet’s
dealers) that cause damage to Bio Bidet.
3. Replacement of discolored or stained parts caused by
chlorine, bleach, ammonia, and other chemicals, cleaning
supplies, oxidation, normal wear and tear.
4. Damage to or malfunction of the unit as a
result of improper and negligent installation.
5. Any and all damages to plumbing, walls, floors, ceiling and
personal properties resulting from water leaks or breakage.
The product must be used at the user’s own risk. Therefore,
the owner hereby releases the manufacturer and distributor
from any and all claims for damages where the above
condition exists.

Thank You
Technical Support/Customer Service
7900 S Route 31 Crystal Lake, IL 60014
T: 847.458.2334
U.S TOLL FREE: 877.339.5214
[email protected]om
www.biobidet.com