BEMIS bioBidet SLIM ZERO User manual

OWNER’S MANUAL
SLIM ZERO

2 3
PRODUCT INFORMATION
Main Unit & Parts.......................................................4
Product Diagram........................................................5
PRODUCT INSTALLATION
Pre-Installaton..............................................................6
Installation.....................................................................8
Water Connection....................................................12
Operation......................................................................16
Night Light Instructions.........................................17
PRODUCT MAINTENENCE
Cleaning & Maintenence......................................20
Troubleshooting.......................................................22
Specifications............................................................24
WARRANTY
Warranty......................................................................26
TABLE OF CONTENTS

4 5
MAIN UNIT & PARTS PRODUCT DIAGRAM
Method 1
Method 2
NOTE: There are two methods for
installation. The recommended way is
using the rubber expansive nuts. The
second option is using the buttery
nuts. Please select the option best
suited for your suited for your
specic installation needs.
T-valve and
rubber gasket
Bidet Supply Hose

6 7
PRE-INSTALLATION
Please make sure you read the instructions carefully and install it properly.
Caution
1. The water pressure limit is from 10 to 110 PSI. Please use as instructed.
2. The water shutoff valve should be near where the product is installed.
Pre-Installation
1. Insert the mounting bolts
into the rectangular steel
mounting brackets.
2. Insert the mounting bolts
with the brackets into the
catch plate.
3. Example of how the bolts fit through the mounting brackets
and how they are placed onto the catch plate and secured to
the toilet.

8 9
1. Completely remove the
old toilet seat and lid.
2. Install expansion nuts.
3. Attach the catch plate. 4. Install the bidet seat.
•Attach the catch plate in the
toilet seat holes. Adjust the
position of mounting bolts
and adjusting pieces to line
up the mounting bolts to the
expansion nuts. Then tighten to
secure the catch plate.
•Line up the bidet with the
catch plate then push the bidet
seat onto the catch plate. You
will hear the bidet seat click
into place.
•Be sure to firmly press down
so the top of the expansion
nut is flush with the ceramic
toilet surface.
First Installation Method (Recommended)
INSTALLATION

10 11
Second Installation Method
1. Remove the old
toilet seat.
2. Attach the catch plate. 3. Install the bidet seat, line
up the bidet with the
catch plate, you will hear
the seat click into place.
•Put the catch plate over
the toilet seat mounting
holes in the ceramic of the
connecting bolts with
adjusting pieces. Screw on
the nuts from underneath the
toilet. Then tighten to secure
the catch plate.
INSTALLATION (CONT.)

12 13
WATER CONNECTION
1. Close the water supply
valve. Flush the toilet.
2. Unscrew the water
supply hose from the
water tank. Place a towel
below the tank to catch
any dripping water.
3. Attach the T-valve to the
water tank where you
removed the water supply
hose. Ensure the rubber
gasket is properly seated
within the T-valve.
4. Re-attach the water
supply hose to the
bottom of the T-valve.

14 15
WATER CONNECTION (CONT.)
5. Connect the bidet
supply hose.
•Connect the bidet supply hose
to the metal inlet on the side
of the bidet seat. Connect the
other end of the hose to the
T-valve and tighten snugly. Be
careful not to over-tighten.
6. Slowly open the water
valve to check if there is
any leakage. •Tighten any connectors gently until leakage stops. If any leaks continue,
turn off the water supply and check older hoses for damaged rubber
o-rings. Teflon tape may be used on connections to help seal.
7. Wipe the hoses and connectors thoroughly with a towel and
carefully observe for any leaks for at least 10 minutes.

16 17
OPERATION NIGHT LIGHT INSTRUCTIONS
Stop
•Return the lever to the upright
position to turn it off.
Bidet (Front Feminine Wash)
•Gradually push control lever forward until
preferred pressure is reached.
Rear Wash
•Gradually push the control lever back until
preferred pressure is reached.
1. Installing the battery
•Remove the batter pack. •Insert 4AA batteries, and put
the battery pack in the control
box. Replace the cover firmly.
•To ensure the proper polarity AA batteries must be used.
•During initial installation and replacement of the batteries you must install
based on the figure provided above.
•During long periods of non-use, it is recommended to remove the batteries
from the battery pack.
Note: Please check and clean the battery contacts prior to installation
Single use AA batteries are recommended.

18 19
NIGHT LIGHT INSTRUCTIONS (CONT.)
2. Instructions 3. Replacing the battery.
•Install the bidet onto the toilet. •When the light turns red please
replace the battery.
•When replacing the battery,
press the release button on
the bidet, then remove.
Repeat the steps above to
replace the batteries.
•Press the button once, the high light is on.
•Press again, the low light is on.
•Press a third time, the light will turn off.
•To prolong the battery life, the night light turns off after 7 hours.
•Pressing the power button will reset the 7 hour timer.
Operation
Important

20 21
1. Cleaning the exterior of
the bidet seat.
•Using a sponge/cloth with
water and/or mild soap to
clean the product. Do not
use the following types of
cleaning products: hydrogen
chloride detergent, paint
thinner, benzene abrasive
paper, polishing agent, bleach
or chlorine.
•Pull out the nozzle softly
and use a smooth cloth/
sponge or soft toothbrush
to clean the nozzle.
•Turn off the water supply,
remove the white water hose
and clean the filter screen.
•Clean the regulator o-ring.
•Close the cover. Push and hold
the release button and pull the
bidet seat forward
as shown.
2. Cleaning the
spray nozzles.
3. Clean the filter
and regulator.
4. Remove the main body.
CLEANING & MAINTENANCE

22 23
TROUBLESHOOTING
Status Cause Solution
Water is too
low during
WASH/BIDET
Low water pressure of
the unit.
During use, turn the lever
forward or backward to
highest setting
Low water pressure of
water supply.
If the water supply pressure
is too low, contact your
local water utility.
No water comes
out during
WASH/BIDET
Water shut-off valve is
turned off
Turn on the water
shut-off valve
Filter of T-shaped
connector is clogged
Clean th lter of
T-shaped connector
Filter of water inlet
hose is clogged
Clean the lter of water
inlet hose
Nozzle head is stuck Take off an clean the
nozzle head
External water
pressure is low
Increase external
water pressure
Water is
dropping from
the bowl when
using the unit
External water
pressure is too high
The maximum water pressure
of the unit is 110 PSI. If the
water supply pressure is
above this, contact
your local water utility.
Night light
doesn’t work
Low batteries Water is too low during
WASH/BIDET
If any failure still occurs after above troubleshooting, please
contact [email protected]
Do not disassemble, repair, or remodel the unit, as this will
void the warranty.

24 25
Classifications Description
Model Number Slim Zero
WASH water ow 0.35-1.8 L/min
Feminine water ow 0.35-1.8 L/min
Backow Prevention Check valve
Water Supply Direct from water pipes
Water Pressure Range 10-110 PSI
Dimensions 19.68” (l) x 14.30” (w)
x 2.25” (h)
Weight 4.85 lbs
SPECIFICATIONS

26 27
WARRANTY
Your Bio Bidet Slim Zero is warranted against defects in materials or
workmanship for one (1) year from the date of original purchase. Defective
parts or a defective product returned to Bio Bidet will be repaired with new or
comparable rebuilt parts by Bio Bidet at their sole discretion.
This limited warranty given by BBC Innovation LLC covers all defects
encountered in normal use of Bio Bidet Slim Zero, and does not apply in the
following cases
1. Loss of or damage to Bio Bidet Slim Zero due to abuse, misuse, tampering,
mishandling, improper packaging by you, alteration, and failure to following
operating instructions.
2. Use of parts supplies (other than those by BBC Innovation LLC’s dealers)
that cause damage to Bio Bidet Slim Zero.
3. Replacement of discolored or stained parts caused by chlorine, bleach,
ammonia and other chemicals, cleaning supplies, oxidation, normal wear
and tear.
4. Damage to or malfunction of the unit as a result of improper and
negligent installation.
5. Any and all damages to plumbing, walls, floors, ceiling and personal
properties resulting from water leaks or breakage. The product must be
used at the user’s own risk. Therefore, the owner hereby releases the
manufacturer and distributor from any and all claims for damages where
the above condition exists.
No implied warranty, included any implied warranty of merchantability or
tness or a particular purpose, applies to Bio Bidet after the applicable period
of the express limited warranty stated above, and no other express warranty
or guarantee, except as mentioned above, given by any person or entity with
respect to Bio Bidet shall bind Bio Bidet, (some states and provinces do not
allow limitations of the length of an implied warranty) so the above limitation
may not apply to you. Bio Bidet shall not be liable for revenues or spacings,
inconvenience, expense for substitute equipment or service, or any other
special incidental or consequential damages caused by the use or misuse of
or in ability to use, Bio Bidet regardless of the possibility and foresee ability
of such damages. In no event shall recovery of any kind against Bio Bidet
be greater in amount than the purchase price of the product and causing
the alleged damage. Without limiting the foregoing, you assume all risk and
liability for loss, damage or injury to you and your property and to others ad
their property arising out of use or misuse of or inability to use the Bio Bidet
not caused directly by the negligence of Bio Bidet. This limited warranty shall
not extend to anyone other than the original purchaser of the Bio Bidet.

Thank You
Technical Support/Customer Service
7900 S Route 31 Crystal Lake, IL 60014
T: 847.458.2334
U.S. TOLL FREE: 877.339.5214
[email protected]
www.biobidet.com