BEMIS BioBidet PEARL HSB-100 User manual

User Manual HSB-100
HSW-100

3
TABLE OF
CONTENTS
PRODUCT INFORMATION
Features........................................................................4
Parts................................................................................5
PRODUCT INSTALLATION
Pre-Installation...........................................................6
Installation....................................................................7
PRODUCT OPERATION
Operation.....................................................................12
Cleaning........................................................................13
WARRANTY
Warranty.......................................................................14

4 5
FEATURES PARTS
•High quality sliver brass valve
•Magnetic Dock
•Adjustable water pressure
•6” Comfortable handle body
•Easy D.I.Y. installation
•Ambient temperature bidet wash
•58” Metal spiral hose
•No electricity or batteries required
•One year warranty
Handheld Bidet (Be sure Flat Washer is
inside end of T-Valve)
Stainless steel hook/
Magnet sprayer holder
Stainless Steel
Supply Hose
Expanding nut
X2
expanding screw
X2
short screw
X2
Double sides
adhesive tape

6 7
PRE-INSTALLATION INSTALLATION
CAUTION:
Do not over tighten any connections. Over tightening connections
can cause damage to the parts and cause leaking.
NOTICE:
Observe all local plumbing, electrical, and building codes.
When installing this unit, be sure that the water supply valve
is fully turned off. Failure to do so can result in flooding and
water damage.
1. Shut off the water
supply to the toilet.
•Flush the toilet to drain
all water inside the tank.
•Attach the 7/8” T-valve
shutoff to the threaded
fill valve on your toilet.
Be sure the 7/8” flat
washer is in the T-valve
before installing. Position
the T-valve so that the
shutoff handle is facing
the front of the toilet.
2. Disconnect the
supply line from
the toilet fill valve.
valve
Water tank
Toliet supply line

8 9
3. Reattach your existing
toilet supply line.
•Reattach your
existing toilet supply
line to the bottom of
the T-valve. Be sure all
connections are secure,
and no leaking or water
is present.
4. Remove protective
plastic covers
•Remove protective
plastic covers on
threaded caps from the
ends of the 48” stainless
steel supply hose. Attach
the hex-head end of the
hose to the T-valve.
NOTICE
This device is designed for connection to a cold water source with a
pressure of 20-80 psi.
Water tank
Stainless steel
supply hose
Water tank
INSTALLATION (CONT.)
5. Attach the Handheld Bidet to the
other end of the supply hose.
•As a precaution, slide the level
on the handheld bidet sprayer
to “off,” which is away from the
sprayer head.
Stainless steel supply hose
Turn OFF

10 11
7. Turn on the water supply valve.
•Turn on the water supply valve on the back wall and check
for any leaks. Use common plumbers tape if necessary
on any leaking threads, reattach and test again. Carefully
remove toilet lid and place holder in desired location.
INSTALLATION (CONT.)
6. Mounting Spray
Option 1: Toilet Mount
Option 2: Wall mount
Option 3: Wall mount
•Install the magnet
sprayer holder onto
the hook with the
short screws like in
the picture shown.
Carefully remove the
toilet lid and place
the holder in the
desired location.
•Use the included
screw to attach the
magnet sprayer
holder to the wall.
•Make sure to use an
expanding nut if you are
attaching to dry wall.
•If the wall is glossy,
wipe it clean and
dry. Place the double
sides adhesive tape
on the magnet sprayer
holder and firmly press
to the wall.
Wall
Expanding Nut
Screw
double sides
adhesive tape
Wall
Magnet sprayer
holder

12 13
OPERATION CLEANING
How To Use
•Open the T-valve to allow water to flow to the
Handheld Bidet Sprayer.
•Direct the Handheld Bidet to the appropriate area and slide
the lever to the “on” position.
•When finished, slide the lever to the “off” position and close
the T-valve.
NOTE: THE T-VALVE MUST BE SHUT OFF AFTER EACH USE.
Failure to turn off after each use may cause flooding and water
damage. BBC Innovation LLC is not responsible for damage that is
caused by failure to follow this instruction.
Cleaning the Bidet Sprayer
Your bidet sprayer is made with a higher grade fire-retardant ABS
resin. Using harsh cleaning chemicals can weaken the material
causing it to damage and develop cracks.
•Clean the bidet sprayer by wiping the surface area with a
damp cloth regularly.
•Do not use harsh detergents or any cleaning tools
with bristles on your bidet.
•Steam cleaning is the preferred cleaning method for your
bidet. For a deep chemical free clean, consider the Bio Mist
Bidet Cleaner.
NOTE:
If any leaks occur, check all rubber washers and make sure all
connections are tight and secure. If leaking persists, discontinue
use of the unit, turn off the water source and contact support@
biobidet.com.

14 15
WARRANTY
Your Bio Bidet is warranted against defects in materials
or workmanship for one (1) year from the date of original
purchase. Defective parts or a defective product returned to
Bio Bidet will be repaired with new or comparable rebuilt parts
or exchanged for a Refurbished Bio Bidet as determined by
Bio Bidet in their sole discretion.
This limited warranty given by Bio Bidet covers all defects
encountered in normal use of Bio Bidet, and do not apply in the
following cases:
1. Loss of or damage to Bio Bidet due to abuse, misuse,
tampering, mishandling, improper packaging by you,
alteration and failure follow operating instructions.
2. Use of parts or supplies (other than those by Bio Bidet’s
dealers) that cause damage to Bio Bidet.
3. Replacement of discolored or stained parts caused by
chlorine, bleach, ammonia, and other chemicals, cleaning
supplies, oxidation, normal wear and tear.
4. Damage to or malfunction of the unit as a result of improper
and negligent installation.
5. Any and all damages to plumbing, walls, floors, ceiling and
personal properties resulting from water leaks or breakage.
The product must be used at the user’s own risk. Therefore,
the owner hereby releases the manufacturer and distributor
from any and all claims for damages where the above
condition exists.
No implied warranty, including any implied warranty of
merchantability or fitness or a particular purpose, applies
to BBC Innovation LLC bidet after the applicable period of the
express limited warranty stated above, and no other express
warranty or guaranty, except as mentioned above, given by
any person or entity with respect to Bio Bidet shall bind
Bio Bidet, (some states and provinces do not allow limitations
on how long an implied warranty, so the above limitation may
not apply to you). BBC Innovation LLC shall not be liable for
revenues or profits, inconvenience, expense for substitute
equipment or service, or any other special, incidental or
consequential damages caused by the use or misuse of, or
inability to use, Bio Bidet regardless of the possibility and
foresee-ability of such damages. In no event shall recovery of any
kind against BBC Innovation LLC be greater in amount than the
purchase price of the product and causing the alleged damage.
Without limiting the foregoing, you assume all risk and liability
for loss, damage, or injury to you and your property and to others
and their property arising out of use or misuse of, or inability to
use, the Bio Bidet not caused directly by the negligence or BBC
Innovation LLC. This limited warranty shall not extend to anyone
other than the original purchaser of the Bio Bidet.

Thank You
Technical Support/Customer Service
7900 S Route 31 Crystal Lake, IL 60014
T: 847.458.2334
U.S. TOLL FREE: 877.339.5214
[email protected]om
www.biobidet.com