Bend-Pak HD-9SWX User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
HD-9SWX
PRODUCT SKU
5175024
DRAWING Nº
5260594
CATEGORY
Four Post Li
REV
Version K
DATE
09.23.2022

DIMENSIONS ARE IN MM
☺
2
1
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5245079 HD-9SWX LIFT SUPERSTRUCTURE 1 F
2 5250290 HD-9SWX PARTS BOX 1 E
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H UPDATED BOM REVISION 12/13/2021 TM 01367
J
J-001
UPDATED BOM REVISIONS
ADDED PACKGE INFORMATION, PAGE 4
05/24/2022
06/13/2022
TM
TM
01414
01420
K UPDATED BOM REVISION 09/19/2022 CA 01444
SHEET 1 OF 4
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5260594
HD-9SWX PRODUCTION
LIFT VER L (CE CERT)
11/13/2019
DO NOT SCALE DRAWING
1:40
SCALE:
THIRD ANGLE PROJECTION
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 3.

4.764in
121.0mm
4.090in
103.9mm
3.268in MAX
83.0mm MAX
82.111in
2085.6mm
84.291in
2141.0mm
101.850in
2587.0mm
89.055in
2262.0mm
A
4877mm
192.008in
5028mm
197.953in
4788mm
188.504in
[34.291 MIN - 40.906in MAX]
871.0 MIN - 1039.0mm MAX
[34.291 MIN - 40.906in MAX]
871 MIN - 1039mm MAX
9.016in
229.0mm
18.976in
482.0mm
[10.472in - 23.701in]
266.0- 602.0mm
202.008in
5131.0mm
242.486in
6159.1mm
8.839in
224.5mm
80.846in
2053.5mm
DRIVE THRU
178.425in
4532.0mm
FRONT VIEW
4.010in
101.9mm
DETAIL A
SCALE 1 : 8
SHEET 2 OF 4
REV
DWG. NO.
A
SIZE
TITLE:
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260594
HD-9SWX PRODUCTION
LIFT VER L (CE CERT)
1:55
SCALE:

89.055in
2262.0mm
RAISED
87.894in
2232.5mm
TOP LOCK
7.047in
179.0mm
LOWERED
24.272in
616.5mm
LOWEST LOCK
SHEET 3 OF 4
REV
DWG. NO.
A
SIZE
TITLE:
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260594
HD-9SWX PRODUCTION
LIFT VER L (CE CERT)
1:30
SCALE:
ALL DIMENSIONS SHOWN ARE WITH LOCK LADDER ADJUSTED ALL THE WAY UP 1.

DIMENSIONS ARE IN MM
☺
B
1
4
8
3
6
7
5
2
9
DETAIL A
SCALE 1 : 2
11
12
10
DETAIL B
SCALE 1 : 10
15
13
14
16
NEXT ASSEMBLY
5260594
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601127 HD-9SWX POWER POST WELDMENT 1 A
2 5601126 HD-9SWX POST WELDMENT 3 A
3 5216164 HD-9SW CROSSTUBE ASSEMBLY, SMALL WINDOW 1 A
4 5216163 HD-9SW CROSSTUBE ASSEMBLY, LARGE WINDOW 1 A
5 5600917 HD-9SWX SAFETY LADDER WELDMENT 4 B
6 5215192
HD-9/7500BLX POWER SIDE RAMP ASSEMBLY
1 AD
7 5600205
HD-9/7500BLX OFF SIDE RAMP WELDMENT
3 K
8 5600890 HD-7/7500/9, PL-12000 TIRE STOP PLATE WELDMENT 4 F
9 5174665
HD-9SW/SWX EXTENDED ALUMINUM APPROACH RAMP
ASSEMBLY
4 D
10 5535021 NUT M16 x 2.0 4 -
11 5535008 NUT M16 x 2 NL 4 -
12 5545025 WASHER, M16 x 30mm FLAT 4 -
13 5746381 HD-7/7500/ 9 SPACER, SAFETY LADDER, 17.5mm LG 4 B
14 5535013 NUT M10 x 1.5 NL 4 -
15 5545341 WASHER M10 x Ø20 FLAT 8 -
16 5530167 HHB M10 x 1.5 x 45mm 4 -
WHERE USED
HD-9SWX
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D UPDATED BOM REVISIONS 12/10/2021 TM 01367
E
REPLACED 5215883 WITH 5215163, 5215884
WITH 5215164
05/23/2022 TM 01414
F REPLACED 5215194 WITH 5174665 09/15/2022 CA 01444
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5245079
HD-9SWX LIFT
SUPERSTRUCTURE
11/13/2019
DO NOT SCALE DRAWING
1:52
SCALE:
THIRD ANGLE PROJECTION
OR
09/21/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
THREAD M16 HARDWARE ONTO LADDER BOLTS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
A
B
1
2
7
3
DETAIL A
SCALE 1 : 10
4
6
8
DETAIL B
SCALE 1 : 10
5
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
AB UPDATED BOM REVISION 07/07/2020 TM 01174
AC UPDATED BOM REVISION 07/13/2021 TM 01316
AD UPDATED BOM REVISION 12/10/2021 TM 01367
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600192 HD-9/7500BLX POWER SIDE WELDMENT 1 K
2 5502166 CYLINDER ASSEMBLY Ø3.0 x 82 1 N
3 5731309 CABLE RETAINER PLATE 1 A
4 5215122 HD-7/7500/9 SINGLE SHEAVE ROLLER ASSEMBLY 2 E
5 5215123 HD-7500BL/9 TWIN SHEAVE ASSEMBLY 2 E
6 5600900 HD-7/7500/9 RAMP SHEAVE SHAFT WELDMENT 4 E
7 5215820 HD-7500/9 CYLINDER FLANGE ARM ASSEMBLY 1 B
8 5530776 SHCS M8 x 1.25 x 20mm 4 -
WHERE USED
HD-9XW
HD-9STX
HD-9SWX
HD-9SWX-E
HD-7500BLX
PL-12000DP
NEXT ASSEMBLY
5245079
5245242
5245254
5245381
5245392
5245393
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
AD
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215192
HD-9/7500BLX POWER SIDE
RAMP ASSEMBLY
10/15/2008
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
OR 12/21/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

190.096in
4828.4mm
20.472in
520.0mm
5.000in
127.0mm
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
AD
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5215192
HD-9/7500BLX POWER
SIDE RAMP ASSEMBLY
1:10
SCALE:

DIMENSIONS ARE IN MM
☺
1
21
DETAIL A
SCALE 1 : 6
6
14
18
37
8
2
5
4
17
12
13
9
16
11
15
20
19
10
22
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601827 HD-9SW CROSSTUBE WELDMENT, LARGE WINDOW 1 A
2 5746008 D4-12, HD/HDS-7/7500/9/14, HDSO-14 SAFETY PIN 2 D
3 5575420 HD-7/7500/9 SAFETY ROLLER 2 C
4 5215122 HD-7/7500/9 SINGLE SHEAVE ROLLER ASSEMBLY 2 E
5 5600160 HD-7/7500/9 CROSSTUBE SHEAVE SHAFT WELDMENT 2 G
6 5600760 D4-12, HD/HDS LIGHT DUTY SAFETY WELDMENT 2 C
7 5600044 4 POST LIGHT DUTY SLACK SAFETY WELDMENT 2 F
8 5540275 E RING Ø25mm OD DIN 6799 0250 8 -
9 5530005 HHB M6 x 1 x 70 6 -
10 5545005 WASHER, M6 x 12mm FLAT 4 -
11 5535357 NUT M6 x 1.0 NL 8 -
12 5540065 SPRING Ø13mm x 90mm, SLACK SAFETY 2 A
13 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 2 -
14 5505625 FEMALE ROD END M6 x 33 2 -
15 5530756 HHB M6 x 1.0 x 25mm 2 -
16 5550087 FTG ELB -04 COMP x -02 NPT 2 -
17 5540010 E RING Ø32mm OD DIN 6799 2 -
18 5505030 PUSH-ON CLIP Ø10mm SS 2 -
19 5755136 AIR CYLINDER SPACER 12mm 2 A
20 5755137 AIR CYLINDER SPACER 25mm 2 A
21 5755157 D4-12, HD-7/7500/9 CROSSTUBE SPACER Ø16 x Ø10 x 50 2 A
22 5535230 NUT 1/4-28 JN 2 -
NEXT ASSEMBLY
5245078
5245079
WHERE USED
HD-9SW
HD-9SWX
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215883 05/02/2022 TM 01414
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216163
HD-9SW CROSSTUBE
ASSEMBLY, LARGE WINDOW
05/02/2022
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
21
DETAIL A
SCALE 1 : 6
6
17
37
8
2
13
4
5
14
18
9
15
10
12
20
19
11
16
22
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601828 HD-9SW CROSSTUBE WELDMENT, SMALL WINDOW 1 A
2 5746008 D4-12, HD/HDS-7/7500/9/14, HDSO-14 SAFETY PIN 2 D
3 5575420 HD-7/7500/9 SAFETY ROLLER 2 C
4 5215122 HD-7/7500/9 SINGLE SHEAVE ROLLER ASSEMBLY 2 E
5 5600160 HD-7/7500/9 CROSSTUBE SHEAVE SHAFT WELDMENT 2 G
6 5600760 D4-12, HD/HDS LIGHT DUTY SAFETY WELDMENT 2 C
7 5600044 4 POST LIGHT DUTY SLACK SAFETY WELDMENT 2 F
8 5540275 E RING Ø25mm OD DIN 6799 0250 8 -
9 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 2 -
10 5530005 HHB M6 x 1 x 70 6 -
11 5545005 WASHER, M6 x 12mm FLAT 4 -
12 5535357 NUT M6 x 1.0 NL 8 -
13 5540065 SPRING Ø13mm x 90mm, SLACK SAFETY 2 A
14 5505625 FEMALE ROD END M6 x 33 2 -
15 5550087 FTG ELB -04 COMP x -02 NPT 2 -
16 5540010 E RING Ø32mm OD DIN 6799 2 -
17 5505030 PUSH-ON CLIP Ø10mm SS 2 -
18 5530756 HHB M6 x 1.0 x 25mm 2 -
19 5755136 AIR CYLINDER SPACER 12mm 2 A
20 5755137 AIR CYLINDER SPACER 25mm 2 A
21 5755157 D4-12, HD-7/7500/9 CROSSTUBE SPACER Ø16 x Ø10 x 50 2 A
22 5535230 NUT 1/4-28 JN 2 -
NEXT ASSEMBLY
5245076
5245078
5245079
WHERE USED
HD-7PSXW
HD-9SW
HD-9SWX
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215884 05/02/2022 TM 01414
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216164
HD-9SW CROSSTUBE
ASSEMBLY, SMALL WINDOW
05/02/2022
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
A
16
8
11
2
12
65
4
3
13
14
15
10
17
9
18
7
23
24
1
25
DETAIL A
SCALE 1 : 8
21
20
19
22
NEXT ASSEMBLY
5260594
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5174044 HD-9SW PARTS BAG 1 B
2 5570795 1/4" POLY-FLO TUBING 21000*mm -
3 5595628 CABLE ASSEMBLY Ø10 x 11957mm ST 1 B
4 5595627 CABLE ASSEMBLY Ø10 x 8031mm ST 1 C
5 5595061 CABLE ASSEMBLY Ø10 x 7201mm ST 1 D
6 5595626 CABLE ASSEMBLY Ø10 x 3290mm ST 1 B
7 5215096 PUSH BUTTON AIR ASSEMBLY 1 G
8 5715003 POWER UNIT VIBRATION DAMPENER 1 B
9 5745014 HD-7/7500/9 DRIVE UP RAMP PIN 8 B
10 5216139 FLEX TUBE KIT, UP TO 2000mm 1 A
11 5700029 HD-SERIES FLEX TUBE BRACKET PLATE 1 F
12 5700033 HD-SERIES FLEX TUBE ANGLE 1 E
13 5700072 WHEEL CHOCK 4 B
14 5570238 HYDRAULIC HOSE ASSEMBLY Ø6.4 x 3870mm SB 1 A
15 5530456 AB 3/4" x 4 - 3/4" 16 -
16 5600405 HD-7/9/7500 TOP PLATE WELDMENT 4 C
17 5900033 HD-9SW/SWX INSTALLATION MANUAL 1 -
18 5716630 HD-7/7500/9 CROSSTUBE COVER, PLASTIC 4 A
19 5735663 HD-9 RAMP STRAP, BOLT ON 3 B
20 5545347 WASHER, M12 FLAT WASHER 6 -
21 5530375 HHB M12 x 1.75 x 25 CL12.9 6 -
22 5535012 NUT M12 x 1.75 NL 6 -
23 5716005 D4-12, HD-7/7500/9/14/HDSO-14 POLYETHYLENE SLIDE
BLOCK
16 M
24 5210241 4 POST LIGHT DUTY CE PARTS BAG 1 A
25 5930195 ANTI-SLIP TAPE, 6” x 24ft 2 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
ADDED 5210241, REMOVED 5535358 AND
5545342, UPDATED BOM REVISIONS
07/15/2020 TM 01174
D UPDATED BOM REVISION 07/19/2021 TM 01316
E
ADDED 5930195, REPLACED 5570050 WITH
5216139
05/04/2022 TM
01414
PRE A
WHERE USED
HD-9SWX
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5250290
HD-9SWX PARTS BOX
11/13/2019
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
OR 05/09/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
HOSES AND CABLES IN REPRESENTATIONAL FORM 3.
(*) LENGTH FOR REFERENCE ONLY 4.

DIMENSIONS ARE IN MM
☺
18
19
DETAIL A
SCALE 1 : 4
3
2
DETAIL B
SCALE 1 : 8
4
5
6
14
12
DETAIL C
SCALE 1 : 4
10
8
9
71
11
DETAIL D
SCALE 1 : 4
13
DETAIL E
SCALE 1 : 4
16
15
17
NEXT ASSEMBLY
5250289
5250290
5250291
5250349
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5505031 ROTOR CLIP Ø12mm SS 16 -
2 5530756 HHB M6 x 1.0 x 25mm 8 -
3 5535357 NUT M6 x 1.0 NL 8 -
4 5535001 NUT M8 x 1.25 NL 4 -
5 5545340 WASHER M8 x24 FLAT 4 -
6 5530010 HHB M8 x 1.25 x 25mm ZPL 4 -
7 5530009 HHB M12 x 1.75 x 90 CL8.8 16 -
8 5545201 WASHER, M12 SPRING LOCK 16 -
9 5545347 WASHER, M12 FLAT WASHER 16 -
10 5535354 NUT, M12 x1.75 16 -
11 5550395 FTG TEE -04 COMP x -04 COMP x -04 COMP 3 -
12 5550089 FTG ELB -04 COMP x -06 NPT 2 -
13 5550106 FTG ELB -04JIC x 3/8” NPT 1 -
14 5550008 FTG ELB -04 JIC -06L ORB 1 -
15 5545009 WASHER, M4 x 9mm FLAT 2 -
16 5530008 SHCS M4 x 0.7 x 12 BOC 2 -
17 5535010 NUT M4 X 0.7 NL 2 -
18 5545535 C WASHER SHIM FOR LIFTS 20 -
19 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 -
WHERE USED
HD-9SW
HD-9SW-E
HD-9SWX
HD-9SWX-E
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5174091 11/13/2019 CA 01120
B REMOVED 5550025 07/13/2021 TM 01316
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5174044
HD-9SW PARTS BAG
11/13/2019
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 07/26/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
2
1
3
4
5
6
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600703
HD-9SW/SWX EXTENDED ALUMINUM APPROACH
RAMP WELDMENT
1 C
2 5600722 HD-9 DRIVE UP TIE PLATE WELDMENT 1 A
3 5716054 APPROACH RAMP EDGE GUARD 1 A
4 5530093 HHB M6 x 1.0 x 20mm 3 -
5 5545005 WASHER, M6 x 12mm FLAT 3 -
6 5535357 NUT M6 x 1.0, NL CL8 3 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B REPLACED 5600246 WITH 5600722 12/21/2012 TM 00573
C UPDATED BOM REVISION 02/06/2015 TM 00685
D
ADDED 5716054, 5530093, 5545005, AND
5535357, UPDATED BOM REVISION, TITLE, AND
NEXT ASSEMBLIES
09/15/2022 CA 01444
WHERE USED
HD-9SW
HD-9SW-E
HD-9SWX
HD-9SWX-E
NEXT ASSEMBLY
ACCESSORY
5174670
5245078
5245079
5245080
5245254
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5174665
HD-9SW/SWX EXTENDED
ALUMINUM APPROACH
RAMP ASSEMBLY
09/04/2012
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
OR 09/21/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
3
1
6
2
5
4
7
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E REPLACED 5550481 WITH 5550087 10/29/2013 TM 00593
F
REPLACED 5590240 WITH 5590175, UPDATED
NEXT ASSEMBLIES
05/05/2015 MR 00683
G
SWITCHED POSITIONS OF 5550087 AND
5550486, UPDATED NEXT ASSEMBLY
06/16/2016 TS 00765
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5700031 ZERO ANGLE MOUNTING BRACKET 1 C
2 5590175 PUSH BUTTON AIR VALVE 1 -
3 5530043 SHCS M3 x 0.5 x 30 2 -
4 5545024 WASHER, M3 x 9mm FLAT 2 -
5 5535020 NUT M3 x 0.5, NL CL8 2 -
6 5550087 FTG ELB -04 COMP x -02 NPT 1 -
7 5550486 FTG NPL -02 NPT x -04 F NPT 1 -
NEXT ASSEMBLY
D4-12 SERIES
HD SERIES
HDS SERIES
HDSO SERIES
PL-12000DP
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215096
PUSH BUTTON AIR
ASSEMBLY
03/14/2008
DO NOT SCALE DRAWING
2:3
SCALE:
THIRD ANGLE PROJECTION
CA 09/02/2015
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
3
2
5 4
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
ITEM
NO
PART
NUMBER
DESCRIPTION
QTY
REV
1 5601303
HD-7500/9 CYLINDER FLANGE ARM WELDMENT
1
B
2 5715031
HD-7500/9/973 CYLINDER CABLE BLOCK ARM SLIDE
2
B
3 5530244
FHPS M6 x 1.0 x 20mm
4
-
4 5535357
NUT M6 x 1.0 NL
4
-
5 5545005
WASHER, M6 x 12mm FLAT
4
-
NEXT ASSEMBLY
5215190 5215192 5215512 5215525 5216058 5216185 5216188
WHERE USED
HD-9 SERIES
HD-75BXT
HD-7500BL SERIES
PL-12000DP SERIES
REVISION
REV
DESCRIPTION
DATE
EDITED BY
ECO#
A
PRODUCTION RELEASE, DERIVED FROM 5215129
01/29/2019
TM
01039
B
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED BOM REVISIONS AND NEXT ASSEMBLIES
12/20/2019
TM
01120
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
BENDPAK INC.
ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF
BENDPAK INC.
IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED
.
TM
5215820
HD-7500/9 CYLINDER
FLANGE ARM ASSEMBLY
01/28/2019
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR
04/20/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION
1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
2.
ASSEMBLE ITEMS AS SHOWN
3.

DIMENSIONS ARE IN MM
☺
1
3
2
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
PRODUCTION RELEASE, DERIVED FROM
5570050, 5570052, 5570239
05/05/2022 TM
01414
PRE A
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570053 PE FLEX TUBE Ø34.5xØ29 2100mm* -
2 5555555 WQG1-M36/AD34.5 CONNECTOR 2 -
3 5535050 PLASTIC NUT M36 x 2 2 -
WHERE USED
D4-12 SERIES
HD-14T
HD-7500 SERIES
HD-7W
HD-7P
HD-9 SERIES
HD-973 SERIES
HDS-14 SERIES
HDSO-14 SERIES
HDS-18/27/40 SERIES
NEXT ASSEMBLY
5250058 5250175 5250289
5250059 5250184 5250290
5250079 5250185 5250294
5250081 5250187 5250295
5250082 5250188 5250336
5250143 5250189 5250337
5250144 5250191 5250338
5250164 5250193 5250349
5250167 5250194 5250364
5250168 5250195
5250169 5250278
5250172 5250286
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216139
FLEX TUBE KIT,
UP TO 2000mm
05/05/2022
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
OR 05/10/2022
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
SHOWN IN REPRESENTATIONAL FORM ONLY 2.
(*)LENGTH FOR REFERENCE ONLY

PART SPECIFICATION FORM
ACP
BENDPAK Number:
5570129
MRP Description:
¼” HYDRAULIC HOSE 31 CL-0400X
Date:
05/24/2018
ECO :
00950
1. Engineering Specification
Application:
¼” HYDRAULIC HOSE
Detailed Description:
ONE or TWO BRAID STEEL WIRE HYDRAULIC HOSE
SIZE: 1/4” / 6mm I.D. MIN
0.53” / 13.4mm O.D. MAX
SPECS: 5700PSI OR 393 BAR WORKING PRESSURE MINIMUM
17100PSI OR 1179 BAR MINIMUM BURST PRESSURE MINIMUM
3” / 80mm MIN BEND RADIUS
COLOR: BLACK
ADDITIONAL CONTACT INFORMATION:
Xin Yurong
Shandong Ningjin High Energy Hose Co., Ltd.
Tel: [phone]
No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China
Approved Vendor
Vendor Part #
Contact #
AUTHORIZED
COMPONENT PROVIDER
1) Ningjin Hydraulic Hose
Co.
5570129
[phone]
X
2)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT
2. Vendor Information (Or for Reference)

3870
1
3
2
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 3816mm* -
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 1 -
3 5550345 FTG ELB Ø1/4 CRIMP x -04 JIC 1 -
WHERE USED
HD-9SWX
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5570875 11/19/2019 CA 01120
NEXT ASSEMBLY
5250290
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
CA
5570238
HYDRAULIC HOSE ASSEMBLY
Ø6.4 x 3870mm SB
11/19/2019
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
-- --
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

19.5
7201
44.0
18.0
7157
3
1 2 5
4
REVISION
REV. DESCRIPTION DATE EDITED BY ECO#
OBSO NO LONGER NEEDED 07/12/2012 TM 00534
B UNOBSOLETE FOR USE IN HD-9SWX 11/14/2019 CA 01120
C
WAS 7150 NOW 7201, WAS 7106 NOW 7157,
WAS 7056 NOW 7107
04/29/2020 TM 01163
D ADDED 5535358 AND 5545342 07/15/2020 TM 01174
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5595011 CABLE, LIFTING Ø10mm 7107mm* -
2 5746022 Ø10 THREADED CABLE CONNECTOR 1 D
3 5746021 Ø10 CABLE END CONNECTOR 1 E
4 5535358 NUT M18 x 2.5 NL 1 -
5 5545342 WASHER M18 FLAT 1 -
WHERE USED
HD-9SWX
NEXT ASSEMBLY
5250290
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
CA
5595061
CABLE ASSEMBLY
Ø10 x 7201mm ST
11/14/2019
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535358 WITH 5545342 ONTO CABLES FOR SHIPMENT 4.

18.0
3290
3246
19.5
44.0
3
1 2 5
4
ITEM NO. PART NUMBER DESCRIPTION QTY REV
1 5595011 CABLE, LIFTING Ø10mm 3196mm* -
2 5746022 Ø10 THREADED CABLE CONNECTOR 1 D
3 5746021 Ø10 CABLE END CONNECTOR 1 E
4 5535358 NUT M18 x 2.5 NL 1 -
5 5545342 WASHER M18 FLAT 1 -
NEXT ASSEMBLY
5250290
WHERE USED
HD-9SWX
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5595421 11/14/2019 CA 01120
B ADDED 5535358 AND 5545342 07/15/2020 TM 01174
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
CA
5595626
CABLE ASSEMBLY
Ø10 x 3290mm ST
11/14/2019
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535358 WITH 5545342 ONTO CABLES FOR SHIPMENT 4.

18.0
44.0
19.5
8031
7987
3
1 2 5
4
ITEM NO. PART NUMBER DESCRIPTION QTY REV
1 5595011 CABLE, LIFTING Ø10mm 7937mm* -
2 5746022 Ø10 THREADED CABLE CONNECTOR 1 D
3 5746021 Ø10 CABLE END CONNECTOR 1 E
4 5535358 NUT, M18 x 2.5 NL 1 -
5 5545342 WASHER M18 FLAT 1 -
NEXT ASSEMBLY
5250290
5250339
WHERE USED
HD-9SWX
PL-12000DP
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5595423 11/14/2019 CA 01120
B
WAS 8077 NOW 8031, WAS 8033 NOW 7987,
WAS 7983 NOW 7937
04/29/2020 TM 01163
C ADDED 5535358 AND 5545342 07/15/2020 TM 01174
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
CA
5595627
CABLE ASSEMBLY
Ø10 x 8031mm ST
11/14/2019
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
OR 08/28/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535358 WITH 5545342 ONTO CABLES FOR SHIPMENT 4.