Bend-Pak MDS-6LP User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
MDS-6LP
PRODUCT SKU
5175226
DRAWING Nº
5260674
CATEGORY
Mid-Rise Scissor Li
REV
Version A
DATE
04.28.2022

DIMENSIONS ARE IN MM
☺
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5216121 MDS-6LP RAMP ASSEMBLY 2 A
2 5250063 MDS-6LP PARTS BOX 1 L
3 5601099 MDS-6/SP-7XE INNER FLOOR TROUGH WELDMENT 1 D
4 5601098 SP-7XE/MDS-6EXT/LP OUTER FLOOR TROUGH WELDMENT 1 C
5 5215780 SHORT POWER UNIT CONSOLE ASSEMBLY 1 G
6 5216081 MDS-6 APRROACH RAMP ASSEMBLY 4 A
7 5900030 MDS-6 INSTALLATION MANUAL 1 -
8 REF POWER UNIT 1 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5260622 03/09/2022 TM 01403
SHEET 1 OF 4
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5260674
MDS-6LP PRODUCTION
LIFT VER C
03/09/2022
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 3.
POWER UNIT REFERENCE ON PURCHASE ORDER 4.

5
1
4
3
2
7
6
8
4
SHEET 2 OF 4
REV
DWG. NO.
A
SIZE
TITLE:
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260674
MDS-6LP PRODUCTION
LIFT VER C
1:20
SCALE:

44.460in
1129.3mm
FULL RISE
5.200in
132.1mm
FULLY LOWERED
34.961in
888.0mm
TOP LOCK
23.911in
607.3mm
LOWEST LOCK
SHEET 3 OF 4
REV
DWG. NO.
A
SIZE
TITLE:
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260674
MDS-6LP PRODUCTION
LIFT VER C
1:25
SCALE:

[40.078 MIN - 45.984in MAX]
1018.0 MIN - 1168.0mm MAX
[78.188 MIN - 84.094in MAX]
1986.0 MIN - 2136.0mm MAX
66.968in
1701.0mm
19.055in
484.0mm
54.114in
1374.5mm
13.858in
352.0mm
40.256in
1022.5mm
[132.244 MIN - 138.149in MAX]
3359.0 MIN - 3509.0mm MAX
[102.480 MIN - 150.276in MAX]
2603.0 MIN - 3817.0mm MAX
SHEET 4 OF 4
REV
DWG. NO.
A
SIZE
TITLE:
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260674
MDS-6LP PRODUCTION
LIFT VER C
1:25
SCALE:

DIMENSIONS ARE IN MM
☺
A
DETAIL A
SCALE 1 : 5
7
NEXT ASSEMBLY
5260673
5260674
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601796 MDS-6LP BASE WELDMENT 1 A
2 5601021 MDS-6 INNER SCISSOR WELDMENT 1 G
3 5600745 MDS-6 OUTER SCISSOR WELDMENT 1 J
4 5601531 MDS-6LP RAMP WELDMENT 1 A
5 5716202 MDS-6 SCISSOR BOTTOM SLIDE BLOCK 46mm 2 B
6 5716184 MDS-6 SCISSOR TOP SLIDE BLOCK 39mm 2 D
7 5746316 MDS-6 RAMP PIN 1 F
8 5601530 MDS-6 SCISSOR CLEVIS PIN WELDMENT 4 B
9 5535032 NUT M24 x 3.0 NL 2 --
10 5736890 MDS-6 SAFETY ROCKER ARM 1 B
11 5545005 WASHER, M6 x 12mm FLAT 2 --
12 5535357 NUT M6 x 1.0 NL 3 --
13 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 1 --
14 5530093 HHB M6 x 1.0 x 20mm 1 --
15 5530757 HHB M6 x 1.0 x 40 1 --
16 5505625 FEMALE ROD END M6 x 33 1 --
17 5600747 MDS-6 CYLINDER GUIDE WELDMENT 1 E
18 5215475
MDS-6 SERIES CYLINDER GUIDE ARM ROLLER ASSEMBLY
2 B
19 5505136 SPRING PIN M5 x 40 2 --
20 5746431 BEARING SPACER, Ø44 x Ø30 x 2 2 A
21 5502031 CYLINDER ASSEMBLY Ø3.0 x 9" 2 J
22 5746700 MDS-6 SERIES CYLINDER GUIDE PIN, LARGE 1 C
23 5530374 SSS M8 x 1.25 x 16 EXTENDED NL 2 --
24 5756033 MDS-6 CYLINDER SEPARATOR 1 C
25 5570060
MDS-6 SERIES HYDRAULIC HOSE ASSY Ø6.35 x 254mm SB
2 D
26 5550310 FTG TEE -04JIC -04JIC -04JIC 1 --
27 5550001 FTG NPL -04 COMP x -02 NPT 2 --
28 5550087 FTG ELB -04 COMP x -02 NPT 1 --
29 5545001 WASHER 25mm x 37mm 2 --
30 5530031 HHB M6 x 1.0 x 12mm 6 --
WHERE USED
MDS-6LP
MDS-6LPF
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DREIVED FROM 5215968 03/09/2022 TM 01403
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216121
MDS-6LP RAMP ASSEMBLY
03/09/2022
DO NOT SCALE DRAWING
1:15
SCALE:
THIRD ANGLE PROJECTION
OR 03/21/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
HOSES MUST BE ROUTED BEFORE PACKAGING 2.
HOSES SHOWN IN REPRESENTATIONAL FORM 3.
COIL EXCESS HOSE INSIDE RAMP FOR SHIPMENT 4.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 5.
ASSEMBLE ITEMS AS SHOWN 6.
5736890 MUST ROTATE FREELY 7.

A
B
3
9
4
7
2
17
18
19
21
20
24
23
22
25
26
27
29
1
5
6
DETAIL A
SCALE 1 : 5
28
15
13
12
11
10
16
14
DETAIL B
SCALE 1 : 2
8
30
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5216121
MDS-6LP RAMP ASSEMBLY
1:18
SCALE:

DIMENSIONS ARE IN MM
☺
3
1
7
4
8
5
6
2
9
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5174018 MDS-6EXT/LP PARTS BAG 1 K
2 5210232 LOW RISE SCISSOR LIFT RUBBER PAD KIT, SET OF 8 1 A
3 5570911
MDS-6 SERIES HYDRAULIC HOSE ASSY Ø6.35 x 458mm DS
1 B
4 5570081 HYDRAULIC HOSE ASSEMBLY Ø6.35 x 3352mm DB 2 B
5 5570795 1/4" POLY-FLO TUBING 9260mm* --
6 5590103 HYDRAULIC FLOW DIVIDER; MTE 1 --
7 5530307 AB 3/4" x 5" 6 --
8 5530326 AB Ø3/8" x 2-1/4" 2 --
9 5250063-1 MDS-6LP/LPF PARTS BOX 1 --
NEXT ASSEMBLY
5260674
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
J ADDED 5250063-1 10/01/2020 TM 01212
K REPLACED 5590104 WITH 5590103 07/20/2021 CA 01317
L REPLACED 5570079 WITH 5570081 04/27/2022 TM 01403
WHERE USED
MDS-6LP
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
L
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5250063
MDS-6LP PARTS BOX
01/30/2017
DO NOT SCALE DRAWING
1:15
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

DIMENSIONS ARE IN MM
☺
A
5
4
3
2
13
1
11
10
9
12
14
15
16
17
DETAIL A
SCALE 1 : 2
8
6
7
NEXT ASSEMBLY
5250054
5250063
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H ADDED (3) 5550395 AND 5550089 09/17/2019 TM 01128
J ADDED 5580012 03/12/2020 CA 01137
K REMOVED 5550087 AND 5550486 03/27/2020 TM 01152
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5545535 C WASHER SHIM FOR LIFTS 20 --
2 5550103 FTG ELB -04 JIC -06 ORB 1 --
3 5550100 FTG NPL -04 JIC x -06 NPT 3 --
4 5545340 WASHER M8 x24 FLAT 4 --
5 5530304 HHB M8 x 1.25 x 20 4 --
6 5545005 M6 FLAT WASHER 8 --
7 5530756 HHB M6 x 1 x 25 8 --
8 5535357 NUT M6 x 1.0 NL 8 --
9 5755155 MDS-6K DRIVE UP RAMP BOLT SPACER 8 B
10 5545027 WASHER M12 x Ø37 x 3mm 8 --
11 5530193 HHB M12 x 1.75 x 50 8 --
12 5535012 NUT M12x1.75 NL 8 --
13 5550395 FTG TEE -04 COMP x -04 COMP x -04 COMP 4 --
14 5550106 FTG ELB -04JIC x 3/8” NPT 3 --
15 5530788 EYE M10 x 1.5 x 28 ID 1 --
16 5550089 FTG ELB -04 COMP x -06 NPT 1 --
17 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 --
WHERE USED
MDS-6LP
MDS-6EXT
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5174018
MDS-6EXT/LP PARTS BAG
07/28/2016
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
OR 04/03/2020
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

DIMENSIONS ARE IN MM
☺
2
1
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5210944 09/18/2019 TM 01128
NEXT ASSEMBLY
ACCESSORY
5250020
5250021
5250034
5250054
5250062
5250063
5250064
5250110
5250174
5250317
5250318
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5300862 LOW RISE SCISSOR LIFT 75mm RUBBER PAD KIT, SET OF 4 1 A
2 5300861 LOW RISE SCISSOR LIFT 38mm RUBBER PAD KIT, SET OF 4 1 A
WHERE USED
LR-60 SERIES
DLR-6 SERIES
MDS-6 SERIES
P9000LT SERIES
SP-7XE SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5210232
LOW RISE SCISSOR LIFT
RUBBER PAD KIT, SET OF 8
09/18/2019
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 11/01/2019
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
5
4
8
7
6
2
1
3
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601259 SHORT POWER UNIT CONSOLE WELDMENT, R.H. 1 A
2 5601260 SHORT POWER UNIT CONSOLE WELDMENT, L.H. 1 A
3 5215857 3-BUTTON 110/220V CONSOLE TOP 1 C
4 5737071 SHORT POWER UNIT CONSOLE DOOR 1 A
5 5601261 SHORT POWER UNIT CONSOLE DOOR WELDMENT, REAR 1 A
6 5715196 D2/XPR POLYETHYLENE COVER BLOCK 105 x 80 1 D
7 5520329 GROMMET GRO-1.25-UL CAPLUGS 2 -
8 5530031 HHB M6 x 1.0 x 12mm 16 -
NEXT ASSEMBLY
5260196
5260197
5260673
5260674
5260675
5260676
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E ADDED 5905138 01/18/2021 CA 01212
F ADDED 5905775 08/18/2021 TM 01327
G
REPLACED LABELS WITH COLORS &
GRAPHICS NOTE, UPDATED BOM REVISION
09/21/2021 CA 01339
WHERE USED
P9000LT
P000LTF
MDS-6EXT
MDS-6EXTF
MDS-6LP
MDS-6LPF
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215780
SHORT POWER UNIT
CONSOLE ASSEMBLY
05/01/2018
DO NOT SCALE DRAWING
1:12
SCALE:
THIRD ANGLE PROJECTION
OR 09/24/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 3.

DIMENSIONS ARE IN MM
☺
1
2
4
6
3
5
7
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
PRODUCTION RELEASE, DERIVED FROM 5215780
AND 5215781
06/24/2019 TM 01096
B
ADDED 5545024, 5530304, 55535001, REPLACED
5701259 WITH 5601465, REMOVED 5525102,
5520052 AND 5525586
03/31/2020 TM 01152
C
REPLACED 5905039 WITH COLORS & GRAPHICS
NOTE
09/30/2021 CA 01350
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601465 POWER UNIT CONSOLE COVER WELDMENT (3 BUTTON) 1 A
2 5590175 PUSH BUTTON AIR VALVE 1 --
3 5545024 WASHER, M3 x 9mm FLAT 2 --
4 5530043 SHCS M3 x 0.5 x 30 2 --
5 5535020 NUT M3 x 0.5 NL 2 --
6 5550486 FTG NPL -02 NPT x -04 F NPT 1 --
7 5550087 FTG ELB -04 COMP x -02 NPT 1 --
WHERE USED
XR-12AE
SP-7XE SERIES
P9000LT SERIES
MDS-6 SERIES
NEXT ASSEMBLY
5215780
5215781
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215857
3-BUTTON 110/220V
CONSOLE TOP
06/24/2019
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
OR
10/01/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
ASSEMBLE ITEMS AS SHOWN 2.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 4.

DIMENSIONS ARE IN MM
☺
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
1
2
3
4
5
WHERE USED
MDS-6LP
MDS-6EXT
NEXT ASSEMBLY
5260674
5260675
5210279
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215916 09/20/2021 CA 01339
F PART NUMBER DESCRIPTION QTY REV
1 5601730 MDS-6 APPROACH RAMP EXTENSION WELDMENT 1 A
2 5601731 MDS-6 SHORT APPROACH RAMP WELDMENT 1 A
3 5530563 HHB M12 x 1.75 x 30mm CL10.9 2 -
4 5545347 WASHER, M12 FLAT WASHER 4 -
5 5535041 NUT M12 x 1.75 NL CL10.9 2 -
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5216081
MDS-6 APRROACH
RAMP ASSEMBLY
09/20/2021
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
OR 9/24/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

254
1
3
2
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 204mm* --
2 5550040 FTG NPL Ø1/4 CRIMP x -06 NPT M 1 --
3 5550345 FTG ELB Ø1/4 CRIMP x -04 JIC 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B REPLACED 5550325 WITH 5550040 04/28/2016 TM 00746
C WAS 2743 NOW 254 12/09/2016 TS 00794
D
UPDATED TITE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMBLY
01/30/2017 TM 00806
NEXT ASSEMBLY
5210238
5216121
5216122
WHERE USED
MDS-6 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5570060
MDS-6 SERIES HYDRAULIC
HOSE ASSY Ø6.35 x 254mm SB
12/15/2014
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DB 03/16/2017
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

3352
1
2
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 3318mm* --
2 5550345 FTG ELB Ø1/4 CRIMP x -04 JIC 2 --
NEXT ASSEMBLY
5250054
5250062
5250063
5250064
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5570176 07/28/2016 TM 00768
B
B-001
WAS 2920 NOW 3352
UPDATED NEXT ASSEMBLIES
12/09/2016
01/30/2017
TS
TM
00794
00806
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5570081
HYDRAULIC HOSE ASSEMBLY
Ø6.35 x 3352mm DB
07/28/2016
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DB 3/16/2017
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
ANGULAR: MACH 2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

PART SPECIFICATION FORM
ACP
BENDPAK Number:
5570129
MRP Description:
¼” HYDRAULIC HOSE 31 CL-0400X
Date:
05/24/2018
ECO :
00950
1. Engineering Specification
Application:
¼” HYDRAULIC HOSE
Detailed Description:
ONE or TWO BRAID STEEL WIRE HYDRAULIC HOSE
SIZE: 1/4” / 6mm I.D. MIN
0.53” / 13.4mm O.D. MAX
SPECS: 5700PSI OR 393 BAR WORKING PRESSURE MINIMUM
17100PSI OR 1179 BAR MINIMUM BURST PRESSURE MINIMUM
3” / 80mm MIN BEND RADIUS
COLOR: BLACK
ADDITIONAL CONTACT INFORMATION:
Xin Yurong
Shandong Ningjin High Energy Hose Co., Ltd.
Tel: [phone]
No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China
Approved Vendor
Vendor Part #
Contact #
AUTHORIZED
COMPONENT PROVIDER
1) Ningjin Hydraulic Hose
Co.
5570129
[phone]
X
2)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT
2. Vendor Information (Or for Reference)

458
1 2
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 392mm* --
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 2 --
NEXT ASSEMBLY
5250054
5250062
5250063
5250064
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
PRODUCTION RELEASE, DERIVED FROM
5570062
12/09/2016 TS 00794
B
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED NEXT ASSEMLBIES
01/30/2017 TM 00806
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TS
5570911
MDS-6 SERIES
HYDRAULIC HOSE ASSY
Ø6.35 x 458mm DS
12/09/2016
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DB 03/16/2017
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

5
31
2
4
6
7
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5216121
5216122
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5736610 MDS-6 OUTER SCISSOR ARM 2 D
2 5735474 MDS-6K OUTER SCISSOR SPACER 1 B
3 5735477 MDS-6 SERIES SCISSOR PIVOT SPACER 2 D
4 5746311 MDS-6K OUTER SCISSOR SLIDE BLOCK PIN 2 C
5 5565029 BUSHING Ø34 x Ø30 x 36 BR OI 2 --
6 5565028 BUSHING Ø28 x Ø25 x 20 BR OI 2 --
7 5756126 MDS-6 SERIES PIPE, AIR LINE ROUTING LONG 1 C
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
G UPDATED BOM REVISION 12/23/2016 TM 00797
H
H-001
REPLACED 5565029 WITH 5565358, UPDATED
TITE TO REFLECT WHERE USED, UPDATED BOM
REVISIONS AND NEXT ASSEMBLY, UPDATED
PAINT COLOR WAS RED NOW GRAY
ADDED 20% GLOSS PAINT NOTE
01/30/2017
03/13/2020
TM
CA
00806
01137
J REPLACED BUSHINGS WITH CORRECT MATERIAL 08/18/2021 TM 01327
WHERE USED
MDS-6 SERIES
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5600745
MDS-6 OUTER SCISSOR
WELDMENT
03/19/2013
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
OR 9/3/2021
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 2.
REMOVE ALL WELD SPLATTER 3.
LIGHT PRESS FIT BUSHINGS 4.
MASK ALL BUSHING BORES BEFORE PAINTING 5.
DIMENSIONS SHOWN ARE AFTER PAINTING 6.
PAINT GRAY (RAL-7024) 20% GLOSS 7.
NOTE: UNLESS OTHERWISE SPECIFIED.

3
2
4
1
5
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
WHERE USED
MDS-6 SERIES
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5736608 MDS-6EX CYLINDER GUIDE SPACER PLATE 1 C
2 5736611 MDS-6 SERIES CYLINDER GUIDE ARM 2 E
3 5736609 MDS-6 CYLINDER GUIDE STIFFENER 2 C
4 5565360 BUSHING Ø36 x Ø30 x 42 BR 2 A
5 5746430 MDS-6K CYLINDER GUIDE ROLLER PIN 2 A
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
REMOVED 5736985, UPDATED BOM REVISION
AND NEXT ASSEMBLY
10/24/2016 TS 00781
D
UPDATED TITLE TO REFLECT WHERE USED,
UPDATED BOM REVISION
12/16/2016 TM 00797
E
E-001
REPLACED 5565030 WITH 5565360, UPDATED
TITLE TO REFLECT WHERE USED, UPDATED BOM
REVISIONS AND NEXT ASSEMBLY
ADDED 20% GLOSS PAINT NOTE
01/30/2017
03/13/2020
TM
CA
00806
01137
NEXT ASSEMBLY
5215121
5216122
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5600747
MDS-6 CYLINDER GUIDE
WELDMENT
03/20/2013
DO NOT SCALE DRAWING
1:4
SCALE:
THIRD ANGLE PROJECTION
O 3/23/2020
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 2.
REMOVE ALL WELD SPLATTER 3.
LIGHT PRESS FIT BUSHINGS 4.
MASK ALL BEARING BORES BEFORE PAINTING 5.
DIMENSIONS SHOWN ARE AFTER PAINTING 6.
PAINT GRAY (RAL-7024) 20% GLOSS 7.
NOTE: UNLESS OTHERWISE SPECIFIED.

2
6
10
3
1
7
8
94
5
11
12
13
14
15
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
NEXT ASSEMBLY
5216121
5216122
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5736981 MDS-6K INNER SCISSOR ARM 2 C
2 5736980 MDS-6 SERIES INNER SCISSOR SPACER 1 B
3 5735477 MDS-6 SERIES SCISSOR PIVOT SPACER 2 D
4 5746314 MDS-6 SERIES INNER SCISSOR SLIDE BLOCK PIN 1 B
5 5755242 MDS-6 SERIES INNER SCISSOR PIN HOUSING 2 B
6 5565029 BUSHING Ø34 x Ø30 x 36 BR OI 2 -
7 5565028 BUSHING Ø28 x Ø25 x 20 BR OI 2 -
8 5601014 MDS-6 SAFETY LATCH WELDMENT 1 C
9 5756032 MDS-6 SERIES SPACER, LIFT POSITIONER 2 B
10 5746198 MDS-6 SERIES INNER SCISSOR PIN STIFFENER 2 B
11 5756126 MDS-6 SERIES PIPE, AIR LINE ROUTING LONG 1 C
12 5736983 MDS-6KF CYILNDER GUIDE ARM STOP 2 B
13 5735579 MDS-6 CYLINDER GUIDE ARM STOP SUPPORT 2 C
14 5735801 MDS-6K INNER SCISSOR SPACER 1 A
15 5735803 MDS-6 SERIES LIFT POSITIONER STOP 1 A
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E UPDATED BOM REVISION 03/08/2019 TM 01055
F
F-001
UPDATED BOM REVISION
ADDED 20% GLOSS PAINT NOTE
09/17/2019
03/12/2020
TM
CA
01128
01137
G REPLACED 5565358 WITH 5565029 08/18/2021 TM 01327
WHERE USED
MDS-6 SERIES
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5601021
MDS-6 INNER SCISSOR
WELDMENT
07/21/2016
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
OR 9/3/2021
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 2.
REMOVE ALL WELD SPLATTER 3.
LIGHT PRESS FIT BUSHINGS 4.
5601014 MUST ROTATE FREELY 5.
MASK ALL BEARING BORES BEFORE PAINTING 6.
DIMENSIONS SHOWN ARE AFTER PAINTING 7.
PAINT GRAY (RAL-7024) 20% GLOSS 8.
NOTE: UNLESS OTHERWISE SPECIFIED.