Bend-Pak Quatra XR-12000AL User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
XR-12000AL
PRODUCT SKU
5175184
DRAWING Nº
5260189
CATEGORY
Quatra™ Scissors Alignment Li
REV
Version C
DATE
09.17.2020

DIMENSIONS ARE IN MM
☺
A
1
2
DETAIL A
SCALE 1 : 30
8
5
4
39
10
6
7
ITEM
NO
PART NUMBER DESCRIPTION QTY REV
1 5245047 XR-12000AL LIFT SUPERSTRUCTURE VER C 1 F
2 5250098 XR-12000 SERIES PARTS BOX 1 J
3 5905445 QUATRA LABEL 2 --
4 5905455 RUNWAY STOPS LABEL, ENG-FRE 2 --
5 5905460 DANGER BALANCE LABEL, ENG-FRE 2 --
6 5905653 LABEL; ALI-ALCTV-2017 GOLD LABEL, US; MET LABS 1 --
7 5905178 WARNING/LUBE POINT LABEL 8 --
8 5905179 WARNING/CRUSH POINT LABEL 8 --
9 5930609 BLACK AND YELLOW HAZARD 2'' x 10ft 1 --
10 5905952 SERIAL TAG C 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
G UPDATED BOM REVISION 05/30/2019 TM 01088
H UPDATED BOM REVISIONS 10/14/2019 CA 01134
J
UPDATED LABELS WITH ENGLISH FRENCH,
UPDATED BOM REVISION, REMOVED 5905404
03/31/2020 TM 01152
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5260189
XR-12000AL
PRODUCTION LIFT VER C
04/27/2018
DO NOT SCALE DRAWING
1:42
SCALE:
THIRD ANGLE PROJECTION
OR 4/14/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

7627mm
300.3in
604mm
23.8in
1028mm
40.5in
89.5in
2274mm
SHEET 2 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260189
XR-12000AL
PRODUCTION LIFT VER C
1:40
SCALE:

71.3in
1810mm
TOP LOCK
FULL RISE
34.1in
866mm
LOW LOCK
75.3in
1912mm
11.7in
298mm
FULLY LOWERED
SHEET 3 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260189
XR-12000AL
PRODUCTION LIFT VER C
1:40
SCALE:

DIMENSIONS ARE IN MM
☺
A
B
C
D
13
14
20
21
DETAIL A
SCALE 1 : 3
6
7
9
4
8
16
3
DETAIL B
SCALE 1 : 3
5
12 11
10
DETAIL C
SCALE 1 : 3
2
1
DETAIL D
SCALE 1 : 4
15
18
19
22
17
WHERE USED
XR-12000L
XR-12000AL
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5535119 M5 x 30mmL FLOOR ANCHOR 4 --
2 5530312 RHPS M5 x 55mmL 4 --
3 5545005 M6 FLAT WASHER 8 -
4 5535112 NUT M6 x 1.0 8 --
5 5540116 TRUARC Ø12mm 5103-50 8 --
6 5545201 WASHER, M12 SPRING LOCK 4 --
7 5530152 HHB M12 x 1.75 x 30mm 4 --
8 5530047 HHB, M6 x 1 x 30mmL 4 --
9 5540006 SNAP RING TRUARC 5103-100 4 --
10 5530167 HHB M10 x 1.5 x 45mm 4 --
11 5545200 WASHER M10 x Ø18 SL 4 --
12 5535998 NUT M10 x 1.5 4 --
13 5545535 C WASHER SHIM FOR LIFTS 20 --
14 5550395 FTG TEE -04 COMP x -04 COMP x -04 COMP 1 --
15 5550183 FTG ELB -06 JIC -06L ORB 1 --
16 5530019 HHB M6 x 1 x 16 4 --
17 5550106 FTG ELB -04JIC x 3/8” NPT 1 --
18 5550147 FTG NPL -04 JIC x -04 NPT 2 --
19 5550086 FTG ELB -04 NPT x -04 JIC 2 --
20 5535106 HEX NUT M18 x 2.5 12 --
21 5530264 HHB M18 x 2.5 x 75 12 --
22 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B REMOVED 5550310 & (2) 5550489 07/27/2015 TM 00701
C ADDED 5530264 AND 5535106 10/06/2016 TM 00783
D
ADDED 5580012, REMOVED 5590175, 5550486
AND 5550410, REPLACED 5550489 WITH
5550395
03/18/2020 TM 01152
NEXT ASSEMBLY
5250098
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5174680
XR-12000 SERIES
PARTS BAG
01/15/2013
DO NOT SCALE DRAWING
1:20
SCALE:
THIRD ANGLE PROJECTION
OR
4/14/2020
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

DIMENSIONS ARE IN MM
☺
1
2
REVISION
REV. DESCRIPTION DATE EDITED BY ECO #
A PRODUCTION RELEASE 12/03/2008 GJ 00257
B
B-001
UDPATED BOM REVISION
UPDATED NEXT ASSEMBLIES
10/29/2010
01/23/2013
AC
TM
00399
00570
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5600303 WORK STEP WELDMENT 1 B
2 5746104 STEP ANCHOR 2 A
NEXT ASSEMBLY
5250098
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
SIZE:
MATERIAL:
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
GJ
5215179
WORK STEP
---
---
12/02/2008
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
MM 02/20/2013

DIMENSIONS ARE IN MM
☺
3
1
2
4
35.085
34.990
50.100
50.070 51.000
- 0.000
+ 0.500
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
F
REPLACED 5600429 WITH 5601245, ADDED
5565058, UPDATED NEXT ASSEMBLIES
04/16/2018 TS 00919
G
REMOVED 5565058, WAS Ø50.030+0.150 NOW
Ø
50.100
50.070
, WAS Ø35.030+0.150 NOW Ø
35.085
34.990
,
UPDATED BOM REVISIONS, UPDATED TITLE TO
REFLECT WHERE USED
02/19/2019 TM 01045
H UPDATED BOM REVISION 06/03/2019 CA 01088
NEXT ASSEMBLY
5215777
5215779
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5601245
XR-12000 SHORT WYE ARM WELDMENT REAR
LEFT, 4.0" CYLINDER
1 C
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5565024 BUSHING Ø55 x Ø50 x 46L BR OI 2 --
4 5550025 FTG GRS M6 x 1.0 1 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
AC
5215229
XR-12000 SHORT WYE
ARM ASSEMBLY REAR
LEFT, 4.0" CYLINDER
03/30/2010
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
ASSEMBLE ITEMS AS SHOWN 1.
LIGHT PRESS FIT BUSHINGS 2.
NOTE: UNLESS OTHERWISE SPECIFIED .

DIMENSIONS ARE IN MM
☺
3
1
2
4
35.085
34.990
50.100
50.070 51.000
- 0.000
+ 0.500
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H
ADDED 5565056, UPDATED BOM REVISION
AND NEXT ASSEMBLIES
04/25/2018 TS 00919
J
REMOVED 5565056, WAS Ø50.030+0.150 NOW
Ø
50.100
50.070
, WAS Ø35.030+0.150 NOW Ø
35.085
34.990
,
REMOVED 5565056, UPDATED BOM REVISION,
UPDATED TITLE TO REFLECT WHERE USED
02/21/2019 TM 01045
K UPDATED BOM REVISION 05/28/2019 TM 01088
NEXT ASSEMBLY
5215776
5215778
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600430
XR-12000 SHORT WYE ARM WELDMENT REAR RIGHT, 4.0" CYLINDER
1 J
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5565024 BUSHING Ø55 x Ø50 x 46L BR OI 2 --
4 5550025 FTG GRS M6 x 1.0 1 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215359
XR-12000 SHORT WYE
ARM ASSEMBLY REAR
RIGHT, 4.0" CYLINDER
03/30/2010
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
ASSEMBLE ITEMS AS SHOWN 1.
LIGHT PRESS FIT BUSHINGS 2.

DIMENSIONS ARE IN MM
☺
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
9
3
16
14
15
10
211
8
7
6
4
5
1
13 12
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C REPLACED 5701273 WITH 5600643 12/13/2011 TM 00491
D
D-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLIES
02/27/2012
01/23/2013
TM
TM
00502
00570
E UPDATED BOM REVISION 02/22/2016 TM 00749
NEXT ASSEMBLY
5250098
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5746119 XR-12000 SERIES TROUGH SHORT HINGE PIN 4 B
2 5746165 XR-12000 SERIES TROUGH LONG HINGE PIN 1 B
3 5701276 XR-12000 SERIES RAMP HOSE TROUGH MOUNT RH 1 B
4 5600643
XR-12000 SERIES BASE HOSE TROUGH MOUNT WELDMENT
RH
1 C
5 5701277 XR-12000 SERIES BOTTOM TROUGH BRACKET COVER 1 B
6 5701278 XR-12000 SERIES BOTTOM TROUGH 1 B
7 5701281 XR-12000 SERIES BOTTOM HOSE TROUGH COVER 1 B
8 5701282 XR-12000 SERIES TOP HOSE TROUGH COVER 1 B
9 5701283 XR-12000 SERIES TOP HINGE BRACKET COVER 1 B
10 5701280 XR-12000 SERIES TOP TROUGH 1 B
11 5540128 E RING Ø3/8" OD TRUARC 5133-37 10 --
12 5545008 WASHER M5 x Ø10 FLAT 10 --
13 5530045 BHPS M5 x 0.8 x 10 10 --
14 5545005 M6 FLAT WASHER 2 --
15 5535112 NUT M6 x 1.0 2 --
16 5530023 BHPS M6 x 1 x 13 2 --
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215364
XR-12000 SERIES
RIGHT SIDE HOSE
TROUGH ASSEMBLY
03/30/2010
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
CA 02/25/2016
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
3
8
6
5
42
1
12
9
10
11
7
15
14
16
13
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C REPLACED 5701272 WITH 5600642 12/13/2011 TM 00491
D
D-001
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLIES
02/28/2012
01/23/2013
TM
TM
00502
00570
E UPDATED BOM REVISION 02/22/2016 TM 00749
NEXT ASSEMBLY
5250098
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY. REV
1 5701277 XR-12000 SERIES BOTTOM TROUGH BRACKET COVER 1 B
2 5600642
XR-12000 SERIES BASE HOSE TROUGH MOUNT
WELDMENT LH
1 C
3 5701280 XR-12000 SERIES TOP TROUGH 1 B
4 5746119 XR-12000 SERIES TROUGH SHORT HINGE PIN 4 B
5 5746165 XR-12000 SERIES TROUGH LONG HINGE PIN 1 B
6 5540128 E RING Ø3/8" OD TRUARC 5133-37 10 --
7 5701274 XR-12000 SERIES RAMP HOSE TROUGH MOUNT LH 1 B
8 5701278 XR-12000 SERIES BOTTOM TROUGH 1 B
9 5701281 XR-12000 SERIES BOTTOM HOSE TROUGH COVER 1 B
10 5701282 XR-12000 SERIES TOP HOSE TROUGH COVER 1 B
11 5701283 XR-12000 SERIES TOP HINGE BRACKET COVER 1 B
12 5545008 WASHER M5 x Ø10 FLAT 10 --
13 5530045 BHPS M5 x 0.8 x 10 10 --
14 5545005 M6 FLAT WASHER 2 --
15 5530023 BHPS M6 x 1 x 13 2 --
16 5535112 NUT M6 x 1.0 2 --
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215365
XR-12000 SERIES
LEFT SIDE HOSE
TROUGH ASSEMBLY
03/31/2010
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
CA 02/25/2016
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
2
3
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D REPLACED 5550025 WITH 5550028 02/22/2016 TM 00749
E UPDATED BOM REVISION 04/11/2018 TS 00919
F
WAS Ø
35.180
35.030
NOW Ø
35.085
34.990
, UPDATED BOM
REVISION
02/19/2019 TM 01045
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600439
XR-12000 LONG WYE ARM WELDMENT, 5.0"
CYLINDER
1 E
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5550028 FTG ELB GRS M6 x 1 1 --
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
WHERE USED
XR-12000 SERIES
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215366
XR-12000 LONG WYE ARM
ASSEMBLY, 5.0" CYLINDER
03/30/2010
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
CA 3/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
4
3
2
7
6
5
1
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D REPLACED 5550025 WITH 5550028 02/22/2016 TM 00749
E UPDATED BOM REVISION 10/05/2016 TM 00783
F
F-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLIES
09/26/2017
07/19/2018
TM
CA
00888
00919
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600445 XR-12000 SERIES SLIDING BASE PLATE WELDMENT 1 D
2 5701302 XR-12000 SERIES BASE PLATE SLIDE BLOCK COVER 2 B
3 5716024 XR-12000 SERIES BASE PLATE SLIDE BLOCK 2 C
4 5761087 XR-12000 SERIES SLIDING BASE PLATE PIVOT HINGE 2 C
5 5550028 FTG ELB GRS M6 x 1 2 --
6 5530076 HHB M12 x 1.75 x 35mm 6 --
7 5545201 WASHER, M12 SPRING LOCK 6 --
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215371
XR-12000 SERIES SLIDING
BASE PLATE ASSEMBLY
03/31/2010
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 7/19/2018
ASSEMBLE ITEMS AS SHOWN 1.

DIMENSIONS ARE IN MM
☺
2
4
3
NEXT ASSEMBLY
5215774
5215775
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5711200 XR-12000AL SLIDE PLATE ROLLER HOUSING 1 D
2 5580215 9/16 WHITE PLASTIC BALL 20 --
3 5735281 XR-12000AL ALIGNMENT SPRING HUB 2 C
4 5540225 PULL SPRING Ø6.35 x 38mm 8 B
REVISION
REV DESCRIPTION DATE EDITED BY ECO #
B
UPDATED TITLE TO REFLECT WHERE USED
ADDED (4) 5586002
11/01/2010 AC 00399
C REMOVED 5586002, UPDATED BOM REVISION 10/03/2016 TM 00783
D
UPDATED TITLE TO REFLECT MARTKING,
UPDATED BOM REVISIONS AND NEXT
ASSEMBLIES
07/19/2018 CA 00919
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215374
XR-12000AL SLIP PLATE
ROLLER ASSEMBLY
04/01/2010
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
CA 7/19/2018
ASSEMBLE ITEMS AS SHOWN 1.

DIMENSIONS ARE IN MM
☺
3
1
51.00
- 0.00
+ 0.50
50.100
50.070
35.085
34.990
NEXT ASSEMBLY
5215776
5215778
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601247
XR-12000 SHORT WYE ARM WELDMENT FRONT RIGHT, 5.0"
CYLINDER
1 C
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5565024 BUSHING Ø55 x Ø50 x 46L BR OI 2 --
4 5550025 FTG GRS M6 x 1.0 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
REPLACED 5600731 WITH 5601247, UPDATED
NEXT ASSEMBLIES
02/12/2018 TS 00919
D
REPLACED (2) 5565056 WITH 5565024,
REMOVED (2) 5565056, WAS Ø50.030+.150
NOW Ø
50.100
50.070
, WAS Ø35.030+.150 NOW Ø
35.085
34.990
,
UPDATED BOM REVISION, UPDATED TITLE TO
REFLECT WHERE USED
02/22/2019 TM 01045
E UPDATED BOM REVISION 05/24/2019 TM 01088
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215584
XR-12000 SHORT WYE
ARM ASSEMBLY FRONT
RIGHT, 5.0" CYLINDER
01/15/2013
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
ASSEMBLE ITEMS AS SHOWN 1.
LIGHT PRESS FIT BUSHINGS 2.

DIMENSIONS ARE IN MM
☺
7
4
1
3
5
2
6
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
A-001
PRODUCTION RELEASE, DERIVED FOM 5215361
UPDATED NEXT ASSEMBLY
09/06/2013
04/17/2015
SH
TM
00619
00701
B
UPDATED TITLE TO REFLECT MARKETING,
UPDATED BOM REVISION
07/19/2018 CA 00919
C REPLACED 5550185 WITH 5550485 10/14/2019 CA 01134
WHERE USED
XR-1200L
XR-12000AL
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5711231 XR-12000L VALVE BLOCK 1 B
2 5550147 FTG NPL -04 JIC x -04 NPT 4 --
3 5550086 FTG ELB -04 NPT x -04 JIC 2 --
4 5550298 FTG NPL -04 NPT x -04 NPT 5 --
5 5550299 FTG ELB -04 NPT L x -06 JIC 1 --
6 5550485 FTG TEE -04 NPT L x -04 NPTF x -04 NPTF 2 --
7 5550181 FTG TEE -04 JIC x -04 JIC x 04 NPT 1 --
NEXT ASSEMBLY
5250098
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
SH
5215628
XR-12000 VALVE BLOCK
ASSEMBLY
09/06/2013
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
CA
10/16/2019
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
DO NOT ASSEMBLE 3.

DIMENSIONS ARE IN MM
☺
2
3
57
4
1
6
8
10
9
50.110
49.990
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
REPLACED 5530027 WITH 5530021, ADDED
5545023
09/28/2018 TS 01009
C
ADDED 5735678 AND 5565060, REPLACED
5755034 WITH 5601311, REPLACED 5530116
WITH 5530193, 5545141 WITH 5545347,
UPDATED BOM REVISIONS, UPDATED TITLE TO
REFLECT WHERE USED
02/20/2019 TM 01045
D
REPLACED 5565060 WITH 5565056, UPDATED
BOM REVISION
05/28/2019 TM 01088
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5575035 XR-12000 SERIES AIR CYLINDER BRACKET FRONT 1 B
2 5502028 XR-12000L SERIES AIR CYLINDER 1 A
3 5535148 NUT M12 x 1.75 NL CL 8.8 THIN 4 --
4 5545347 WASHER, M12 FLAT WASHER 4 --
5 5530021 HHB, M10 x 1.5 x 30 4 --
6 5545023 WASHER M10 SL 4 --
7 5530193 HHB M12 x 1.75 x 50 4 --
8 5601311 XR-12000 SAFETY LOCK LATCH WELDMENT 2 B
9 5565056 BUSHING Ø55 x Ø50 x 69 BR 2 --
10 5735678 XR-12000 SAFETY LOCK LATCH GUIDE PLATE 2 A
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215765
XR-12000 LOCK
LATCH ASSEMBLY
FRONT, 5.0" CYLINDER
04/19/2018
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
2
35
4
6
50.110
49.990
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 04/23/2018 TS 00919
B
ADDED 5565055, REPLACED 5575033 WITH
5601309, 5545141 WITH 5545347, UPDATED BOM
REVISION, UPDATED TITLE TO REFLECT WHERE
USED
01/03/2019 TM 01045
C
REPLACED 5601309 WITH 560310, 5565055 WITH
5565056
05/30/2019 TM 01088
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5601249 CYLINDER BRACKET WELDMENT 4.0" 1 B
2 5601310 XR-12000 SAFETY STOP BAR WELDMENT 2 B
3 5535148 NUT M12 x 1.75 NL CL 8.8 THIN 4 --
4 5530792 HHB M12 x 1.75 x 45 CL10.9 4 --
5 5545347 WASHER, M12 FLAT WASHER 4 --
6 5565056 BUSHING Ø55 x Ø50 x 69 BR 2 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215766
XR-12000 CYLINDER LOCK
ASSEMBLY REAR, 4.0" CYLINDER
04/20/2018
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
6
5
4
3
2
50.110
49.990
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 04/23/2018 TS 00919
B ADDED 5565060, REPLACED 5575033 WITH
5601310, 5530116 WITH 5530792, 5545141
WITH 5545347, UPDATED BOM REVISION,
UPDATED TITLE TO REFLECT WHERE USED
01/03/2019 TM 01045
C UPDATED BUSHING AND BOM REVISION 05/28/2019 TM 01088
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601248 CYLINDER BRACKET WELDMENT 5.0" 1 B
2 5601310 XR-12000 SAFETY STOP BAR WELDMENT 2 B
3 5530792 HHB M12 x 1.75 x 45 CL10.9 4 --
4 5545347 WASHER, M12 FLAT WASHER 4 --
5 5535148 NUT M12 x 1.75 NL CL 8.8 THIN 4 --
6 5565056 BUSHING Ø55 x Ø50 x 69 BR 2 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215767
XR-12000 CYLINDER LOCK
ASSEMBLY FRONT, 5.0" CYLINDER
04/20/2018
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
3
5
6
4
8
7
2
1
3
10
50.110
49.990
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
REPLACED 5530027 WITH 5530021, ADDED
5545023
09/28/2018 TS 01009
C
ADDED 5735678 AND 5565057, REPLACED
5755034 WITH 5601308, REPLACED 5530116
WITH 5530193, 5545141 WITH 5545347,
UPDATED BOM REVISION, UPDATED TITLE TO
REFLECT WHERE USED
01/03/2019 TM 01045
D
REPLACED 5601308 WITH 5601311, 5565057
WITH 5565056, UPDATED BOM REVISION
05/28/2019 TM 01088
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5575036 XR-12000 SERIES AIR CYLINDER BRACKET REAR 1 B
2 5502028 XR-12000L SERIES AIR CYLINDER 1 A
3 5601311 XR-12000 SAFETY LOCK LATCH WELDMENT 2 --
4 5530193 HHB M12 x 1.75 x 50 4 --
5 5535148 NUT M12 x 1.75 NL CL 8.8 THIN 4 --
6 5545347 WASHER, M12 FLAT WASHER 4 --
7 5530021 HHB, M10 x 1.5 x 30 4 --
8 5545023 WASHER M10 SL 4 --
3 5735678 XR-12000 SAFETY LOCK LATCH GUIDE PLATE 2 A
10 5565056 BUSHING Ø55 x Ø50 x 69 BR 2 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215768
XR-12000 LOCK LATCH
ASSEMBLY REAR, 4.0"
CYLINDER
04/19/2018
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
3
1
2
4
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
50.100
50.070
35.085
34.990
51.000
- 0.000
+ 0.500
NEXT ASSEMBLY
5215777
5215779
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5601254
XR-12000 SHORT WYE ARM WELDMENT FRONT LEFT, 5.0" CYLINDER
1 C
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5565024 BUSHING Ø55 x Ø50 x 46L BR OI 2 --
4 5550025 FTG GRS M6 x 1.0 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215584 02/12/2018 TS 00919
B
REMOVED 5565056, WAS Ø
50.180
50.030
NOW Ø
50.100
50.070
,
WAS Ø
35.180
35.030
NOW Ø
35.085
34.990
, UPDATED BOM
REVISION, UPDATED TITLE TO REFLECT WHERE
USED
02/15/019 TM 01045
C UPDATED BOM REVISION 06/03/2019 CA 01088
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215773
XR-12000 SHORT WYE
ARM ASSEMBLY FRONT
LEFT, 5.0" CYLINDER
04/25/2018
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
ASSEMBLE ITEMS AS SHOWN 1.
LIGHT PRESS FIT BUSHINGS 2.