BENE FRIENDS COAT STAND User manual

USER MANUAL
COAT STAND

RECOMMENDATIONS
• Please read the following instructions carefully and
use the product accordingly.
• This summary may not include every detail of all
variations and considered steps. Please contact us
should you requirefurther information or help at any
time.
• Please assemble this product in accordance with the
instructions.
• Wipe clean with a dry cloth for daily care.
• Should you find that you are missing /or that you have
receiveddefective parts after unpacking, please contact
us immediately and do not attempt to assemble
the product.
WARNINGS
• Each part has a weight loading of up to 10 kg (22 lbs).
Pleaseensure the load is distributed evenly to prevent
instability.
• When removing items from the stand, avoid pulling or
draggingthem to prevent the stand from tilting.
• PLA becomes malleable above 50 °C. bFRIENDS
3D-printed elements are not suitable for dishwasher
cleaning and should be kept away from heat sources.

1. Pull the sleeve element on to and
up alongthe longer pole.Connect
the longer pole to the shorter one
by screwing them together and
position thesleeve over thejoining
point. Repeat this step a further
two times.
3. Once all the wooden poles are
assembled, slide each of them
into the knot. Ensure that the long
sections of the sticks are positioned
downward to guarantee stability.
2. Screw them together.
Repeat this step a further
two times.

Bene GmbH
Schwarzwiesenstrasse 3
3340 Waidhofen/Ybbs
Austria
BENE.COM