Berkel X13AE User manual

Features
anumber of special features. A sanitary one piece
engineered polymer base and product table reduces
seams and joints while providing an FDA approved
surface for easy, effective cleaning. A removable and
Accessories
!Vegetable chute with pusher
!
!
Standard features
!1-speed, 1/2 HP, permanently lubricated ball bearing
knife motor with thermal protection
!Automatic operation in three speeds; 20, 40 or 60
!Three stroke lengths; 1/3, 2/3 and full stroke
!Furnished in 115/60/1, 7 am ps, AC, with 3 wire cord
and plug (see below for optional voltages)
!LED indicates power to the slicer
!One-piece FDA polymer base and product table for
reduced seams, accessibility and easy cleaning
!
!
!
!Large product table with extra capacity:
"Rectangles up to 10-Ωîx 6-æî(265 mm x 170 mm)
"Squares up to 7 -Ωî(190 mm)
!Articulating and full length rear mounted meat pusher
to secure and advance products evenly, fence to hold
product during automatic operation
!
!
!
!No-volt release requires restarting the slicer after a
power interruption
!Permanent ring guard protects entire non-slicing
portion of the knife
!Sealed start/stop switches conveniently located on the
index knob housing out of the food zone
!Simple kick stand for easy cleaning under the slicer
Item #___________________________________________
Automatic Gravity Feed Slicer
Approved By:
Date
Power Options
!1/2 HP, 220/50/1, 3.5 amps, AC, ETL Listed
!1/2 HP, 220/60/1, 3.5 amps, AC, ETL Listed
minute
slices/
Model X13AE
Model X13AE
Ergonomic, multi-grip handle to advance product table
Submersible, removable product table mounted
sharpener for consistent sharpening and easy cleaning
Borazon sharpening stones for fast, accurate
sharpening and extended life
Form # SPC35-1106N
submersible table mounted sharpener with borazon
stones for accurate sharpening. Precise thickness
control is achieved using a variable pitch barrel cam for
fine adjustment and wafer thin slices. The index knob
and operating controls are mounted outside of the drip
zone for quick and easy. The slicer can be automatically
operated in 3 speeds, and with 3 different stroke
lengths. A permanent ring guard protects the entire
non-slicing portion of the knife during slicing and
cleaning. A fence is included with the product table. A
simple kick stand supports the slicer for easy access to
clean under the slicer.
Berkel model X13AE automatic gravity feed slicer offers
Skewers with coring tool
Slaw tray
Index knob conveniently located outside the drip zone
in the upper left to provide quick and easy access
Variable pitch barrel cam for ultra fine, precise slice
adjustment to a thickness of 1-5/16" (34mm)
13" (330mm) diameter, hollow ground, hardened
and polished forged stainless steel knife
"Rounds up to 8-Ωî(220 mm) diameter
Manual Gravity Feed Slicer Model X13AE
Berkel Company ï 4406 Technology Drive ï South Bend, IN 46628-9700
574-232-8222 ï 800-348-025 ï 1 FAX [phone] ï www.berkel.com

Litho in USA
SPECIFICATIONS
Motors: Knife motor is 1-speed, 1/2hp totally enclosed and
permanently lubricated ball bearings, thermally protected.
Table motor is brushless DC providing three fixed speeds, 20,
40 or 60 slices per minute. Three stroke lengths in the
automatic mode, provide more slices/minute at the same
speed.
Electrical: Furnished in 115/60/1, 7 am p, AC, ETL Listed,
with 3-wire cord and plug. Power options noted on page 1.
Finish/Construction: Base, product table, pusher, support
arm and upper housing are constructed of FDA approved,
engineered polymers reducing the number of seams. Gauge
plate and center plate are anodized aluminum. All controls are
sealed and located out of the drip zone.
Cutting Capacity:Shown in chart above.
Kick Stand: A simple kick stand supports the slicer
for easy access to clean under the slicer.
No-volt Release: Requires restarting the slicer in the
event of a power interruption.
Knife Ring Guard: Permanent tapered guard covers
the non-slicing portion of the knife edge.
Controls: Sealed push-button switches located on
the index knob housing out of the drip zone.
As we continually strive to improve our products, specifications are
necessarily subject to change without notice.
Model Cutting Slice Knife Product Dimensions
No. Capacity Thickness Dia. Width A Depth B Height C
X13 Rect. 10-1/2î x 6-3/4î (265 x 170 mm) 1-5/16î 13î
Square 7-1/2î (190 mm) (34 mm) (330 mm)
Round 8-1/2î (220 mm)
Motor Electrical Weight Box Dimensions
Width Depth Height
1-speed 115/60/1
1/2 HP 7 amps
Automatic Gravity Feed Slicer
AB
C
AE
Model X13AE
Knife Sharpener: Removable and submersible table
mounted, two stone, dual action design to ensure correct
pressure and contact angle are always applied, thus reducing
knife wear and delivering a perfect edge. Borazon stones
last longer, sharpen faster and clean easier.
Form # SPC35-1106N
Warranty: Parts, labor and travel coverage for one
year, exclusive of wear items. 3 year replacement
guarantee for polymer parts.
Net 96 lb (43 kg)
Ship 126 lb (57 kg)
©2006 Berkel Company
Knife: 13" (330mm) diameter, hollow ground, hardened and
polished stainless steel.
Thickness Control: Index knob controls a precision, variable
pitch barrel cam with ultra-fine adjustment in the first revolu-
tion and opens to a thickness of 1-5/16" (34 mm) for accurate
and consistent slicing. This control is located out of the drip
zone on the upper left to provide quick and easy access for
operation and cleaning.
Product Table: Full gravity feed 45° angle with
articulating rear mounted pusher that runs the entire
length of the table to secure product for increased
yield and consistency in every slice. A fence provides
stability for the product in automatic mode.
28î 29î 25î
(710 mm) (735 mm) (635 mm)
26-1/2î 31î 25-1/2î
(675 mm) (780 mm) (650 mm)
Manual Gravity Feed Slicer Model X13AE
Berkel Company ï 4406 Technology Drive ï South Bend, IN 46628-9700
574-232-8222 ï 800-348-025 ï 1 FAX [phone] ï www.berkel.com