Besantek BST-LAN10 User manual

LAN CABLE TESTER
INSTRUCTION MANUAL
Test Equipment Depot - 800.517.8431
99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com

-1-
INTRODUCTION
● The Lan cable tester is a newly designed tool that can
easily test the correct pin conguration of the RJ45/RJ11
modular cables, 10/100 base-T cable and Token Ring
cable etc.
● By comparing one transmitting end and the corresponding
receiving end, the Lan cable tester also can test installed
cable far away by using the remote receiving unit.
● The LCT provides the variety for wiring check, such as
cable continuity, open status, short status and miss-wired.
FEATURES
● Designed for RJ45/RJ11 modular cables, 10/100 base-T
cable and Token Ring cable etc.
● The Lan cable tester can verify cable continuity, open,
short circuit and miss-wired.
● The remote receiving unit is available for installed cables
far away either on the wall plates or on the patch panels.
● Auto and manual scan function.
● Ground wire test.
● Lock status function.
● Buzzer sound warning for wire status.
● Display: LED indication for wire status.
● EN61326-1

-2-
INSTRUMENT LAYOUT
(1) RJ45 jack of sourcing end.
(2) RJ45 jack of receiving end.
(3) LED indicator of sourcing end.
(4) LED indicator of receiving end.
(5) Auto scan control button.
(6) Test button for manual wire test.
(7) Power ON/OFF control button.
(8) Battery check button.
(9) Lock control button.
(10) Manual scan control button.
(11) Battery check LED.
(12) LED indicator of receiving end for ground wire test.
(13) LED indicator of sourcing end for ground wire test.
(14) RJ45 jack of the remote receiving unit.
(15) LED indicator of the remote receiving unit.
(16) LED indicator for ground wire test on remote receiving
unit.
(2)
(3)
(4)
(5)
(6)
(7)
(1)
(9)
(8)
(11)
(10)
(15)
(16)
(12)
(13)
(14)

-3-
SPECIFICATIONS
Display LED
Operating
Temperature 0℃~40℃
Power Source 9V (6F22,006P) battery x1
Dimensions Master unit
132(L)x 55(W)x 39(D)mm
Remote receiving unit
74(L)x 30(W)x 25(D)mm
Weight Master unit: 148 g
Remote receiving unit: 33 g
Accessories Instruction manual
Pouch
Battery
Test Equipment Depot - 800.517.8431
99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com

-6-
TEST RESULT

-7-
MAINTENANCE
● Battery replacement:
When press the "BATT" button, if the "BATT LED" doesn't
glow, replace with a new 9V battery.
● Cleaning and storage:
Periodically wipe the case deterged with a damp cloth; do
not use abrasives or solvents.
If the meter is not to be used for periods of longer than
60 days, remove the battery and store them separately.
N85
Test Equipment Depot - 800.517.8431
99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com