Better Homes and Gardens RHODES BH18-021-199-47 User manual

PB 1
model# BH18-021-199-47
Lot#_________Date________
Customer Service:
1.877.436.7290
[email protected]
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
dark brown oak/black
Manufactured By:
BDDMI
1321 Tyler St NE, Minneapolis, MN 55413
Assembly Instructions
RHODES MEDIA STAND

2
TOP PANEL
SHELF
BOTTOM PANEL
BACK PANEL
LEFT SIDE PANEL
PARTITION
RIGHT SIDE PANEL
LEFT SIDE FRAME
RIGHT SIDE FRAME
A
B
C
D
E
F
G
H
I
RAIL
LEFT SIDE DRAWER FRONT
RIGHT SIDE DRAWER FRONT
DRAWER FRONT BACK [X2]
DRAWER LEFT SIDE [X2]
DRAWER RIGHT SIDE [X2]
DRAWER BACK [X2]
DRAWER BOTTOM [X2]
DRAWER SUPPORT [X2]
J
K
L
M
N
O
P
Q
R
Before you begin:
1. Check for damaged or missing parts.
2. Use the carton as a working surface to prevent product damage during assembly.
TOOLS NEEDED
Flat Head Screwdriver Phillips Head Screwdriver
PARTS LIST

2 3
HARDWARE LIST
CAUTION:
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten bolts.
3. Wood Dowel
x14
4. Flat Head Screw
x33
1. Cam
x11
2. Cam Bolt
x11
5. Large Bolt
x8
6. Medium Bolt
x4

4
HARDWARE LIST
CAUTION:
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten bolts.
10. Pull
x2
8. Allen Wrench
x1
9. Pan Head
Screw
x6
7. Small Bolt
x4
11. Pull Bolt
x4

4 5
1 2
3 4 5
180º
HOW TO USE THE CAM LOCK SYSTEM

6
x2 x2
STEP 1
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 5 for instructions on how to use the cam lock system.
3. Wood
D o w e l
2. Cam Bolt
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

6 7
x7 x9 x2
STEP 2
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 5 for instructions on how to use the cam lock system.
3. Wood
D o w e l
2. Cam Bolt 1. Cam
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

8
x9
STEP 3
1. Refer to page 5 for instructions on how to use the cam lock system.
1. Cam
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

8 9
x5 x9
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Make sure the screws go through the pre-drilled holes properly.
3. Do not over tighten screws.
STEP 4
3. Wood
Dowel
4. Flat Head
Screw
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

10
x8 x1
1. Make sure the bolts go through the pre-drilled holes properly.
2. Do not over tighten bolts.
STEP 5
5. Large
Bolt
8. Allen
Wrench
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

10 11
x4 x1
1. Make sure the bolts go through the pre-drilled holes properly.
2. Do not over tighten bolts.
STEP 6
8. Allen
Wrench
6. Medium
Bolt
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

12
x1x4
(H7)
(H7)
1. Make sure the bolts go through the pre-drilled holes properly.
2. Do not over tighten bolts.
STEP 7
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
8. Allen
Wrench
7. Small
Bolt

12 13
x4
(H4)
(H11)
(H9) (H9)
(H11)
(H4)
x6 x4 x2
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten screws.
STEP 8
4. Flat Head
Screw
9. Pan Head
Screw
11. Pull Bolt 10. Pull
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

14
x12
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten screws.
STEP 9
4. Flat Head
Screw
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

14 15
x8
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten screws.
STEP 10
4. Flat Head
Screw
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.

16
STEP 11

16 17
70 lbs. / 31.8 kg.
20 lbs. / 9.1 kg. 20 lbs. / 9.1 kg.
WARNING: Do not exceed the maximum load capacity. Exceeding the maximum load capacity may result in
collapse and possible injury.
Your complete satisfaction is our number 1 priority. Our product is designed and manufactured to meet the
highest quality of standards. In the event that you have assembly questions, or parts are missing or damaged,
our customer service department would appreciate the opportunity to assist you.
This product carries a one (1) year warranty against defects in workmanship and materials. Defective product
will be replaced free of charge within the stated warranty period, when returned by the original purchaser with
proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse. Please
contact our Customer Service at 1-877-436-7290 to obtain information on warranty performance. This warranty
gives you specic legal rights and you may also have other rights which vary from State to State.
Furniture Care Instructions:
Dust with clean, lint-free cloth.
Use furniture spray polish as needed.
Customer Service:
877.436.7290
[email protected]
For use with televisions weighing
65 pounds (29.5 kg) or less. Use with
heavier televisions may result in
instability causing tip over resulting
in death or serious injury.
Use of anti-tip restraints may only
reduce, but not eliminate, the risk
of tip-over.
! WARNING
70 lbs general use /
65 lbs. television use

PB 1
model# BH18-021-199-47
Lot#_________Fecha_______
Servicio al Cliente:
1.877.436.7290
[email protected]
ESTE MANUAL DE INSTRUCCIONES CONTIENE INFORMACIÓN IMPORTANTE DE SEGURIDAD.
POR FAVOR LEA Y GUARDE PARA REFERENCIA FUTURA.
roble marrón oscuro/negro
Fabricado Por :
BDDMI
1321 Tyler St NE, Minneapolis, MN 55413
CONSOLA RHODES PARA
MEDIOS DE COMUNICACIÓN
Instrucciones de Ensamble

2
PANEL SUPERIOR
REPISA
PANEL INFERIOR
PANEL POSTERIOR
PANEL IZQUIERDO
DIVISOR
PANEL DERECHO
MARCO DEL LADO IZQUIERDO
MARCO DEL LADO DERECHO
A
B
C
D
E
F
G
H
I
RIEL
CAJÓN FRONTAL IZQUIERDO
CAJÓN FRONTAL DERECHO
CAJÓN FRONTAL POSTERIOR [X2]
CAJÓN LATERAL IZQUIERDO [X2]
CAJÓN LATERAL DERECHO [X2]
CAJÓN POSTERIOR [X2]
CAJÓN INFERIOR [X2]
SOPORTE DE CAJÓN [X2]
J
K
L
M
N
O
P
Q
R
Antes de comenzar:
1. Compruebe si hay piezas dañadas o faltantes.
2. Utilice la caja de cartón como supercie de trabajo para evitar daños al producto durante el montaje.
Destornillador de Cabeza Plana Destornillador Phillips
HERRAMIENTAS NECESARIAS
LISTA DE PARTES

2 3
LISTA DE ARTÍCULOS DE FERRETERÍA
PRECAUCIÓN:
1. Cerciórese que los tornillos pasen por los agujeros pretaladrados de manera apropiada.
2. No sobreapriete los tornillos.
3. Clavija de Madera
x14
4. Tornillo de
Cabeza Plana
x33
5. Perno Largo
x8
2. Tornillo de Leva
x11
1.Leva
x11
6. Perno Medio
x4