Beurer HK42 User manual

DE Heizkissen
Gebrauchsanweisung ............. 2
EN Heat pad
Instruction for Use................. 10
FR Coussin chauffant
Mode d´emploi ...................... 18
ES Almohadilla eléctrica
Instrucciones para el uso...... 26
IT Termoforo
Instruzioni per l´uso............... 34
TR Isı yastığı
Kullanma Talimatı .................. 42
RU Электрическая грелка
Инструкция по применению .. 50
PL Poduszka elektryczna
Instrukcja obsługi.................. 58
DA Varmepude
Betjeningsvejledning............. 66
SV Värmekudde
Bruksanvisning...................... 74
NO Varmepute
Bruksveiledning..................... 82
FI Lämpötyyny
Käyttöohje............................. 90
Order Online From:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au/heating-cooling

10
ENGLISH
Contents
Explanation of symbols
The following symbols are used on the device, in these instructions for use, on the packaging and on the
type plate for the device:
Read the instructions! Wash at a maximum tem-
perature of 30°C, Very
gentle wash
Do not insert pins! Do not bleach
Do not dry in a tumble
dryer
Do not use folded or
rucked! Do not iron
Not to be used by
very young children
(0 - 3years).
Do not dry-clean
20
PAP
Dispose of packaging
in an environmentally
friendly manner
Manufacturer
1. Items included in the package .........................11
1.1 Description .................................................11
2. Important instructions
Retain for future use ........................................12
3. Intended use.....................................................13
4. Operation..........................................................14
4.1 Safety .........................................................14
4.2 Initial use ....................................................14
4.3 Switching on...............................................14
4.4 Setting the temperature............................14
4.5 Automatic switch-o ................................14
4.6 Switching o.............................................15
5. Cleaning and maintenance.............................15
6. Storage ...........................................................16
7. Disposal..........................................................16
8. What if there are problems?...........................16
9. Technical data ................................................16
10. Warranty / service...........................................16
Dear customer,
Thank you for choosing a product from our range. Our name stands for high-quality, thoroughly tested pro-
ducts for applications in the areas of heat, weight, blood pressure, body temperature, pulse, gentle therapy,
massage, beauty, air and baby.
With kind regards
Your Beurer team

11
This product satisfies
the requirements of the
applicable European
and national directives.
The products demonstra-
bly meet the requirements
of the technical Regula-
tions of the EAEU.
The device has dou-
ble protective insula-
tion and therefore
complies with protec-
tion class 2.
Please dispose of the
device in accordance
with EC Directive – WEEE
(Waste Electrical and Elec-
tronic Equipment).
The KEMA-KEUR symbol documents the safety and com-
pliance with standards of an electrical product.
The textiles used for this device meet the stringent human
ecological requirements of Oeko Tex Standard 100, as ve-
rified by Hohenstein Research Institute.
WARNING: Warning of risks of injury or health hazards
CAUTION: Safety information about possible damage to
appliance/accessories.
NOTE: Important information.
1. Items included in the package
Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are
present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging
material has been removed. If you have any doubts, do not use the device and contact your retailer or the
specified Customer Service address.
1 Heat pad
1 Control
1 Instructions for use
1.1 Description
1. Power plug
2. Power cord
3. Control
4. Illuminated temperature settings
5. Slider for ON/OFF and temperature settings
6. Plug-in coupling
0
1
2
3
1
2
3
4
5
6

12
2. Important instructions
Retain for future use
WARNING
•Non-observance of the following notes may result in personal injury
or material damage (electric shock, skin burns, fire). The following
safety and hazard information is not only intended to protect your
health and the health of others, it should also protect the product.
For this reason, pay attention to these safety notes and include these
instructions when handing over the product to others.
•This heat pad must not be used by persons who are not sensitive to
heat or by other vulnerable persons who may not be able to react to
overheating (e.g. diabetics, people with skin alterations due to illness
or scarred tissue in the application area, after taking pain relief medi-
cation or alcohol).
•This heat pad must not be used by very young children (0-3 years
old) as they are unable to respond to overheating.
•The heat pad can be used by children older than 3 and younger than
8 years of age provided they are supervised. For this, the controller
must always be set to the minimum temperature.
•This heat pad may be used by children over the age of 8 and by
people with reduced physical, sensory or mental skills or a lack of
experience or knowledge, provided that they are supervised and
have been instructed on how to use the heat pad safely, and are fully
aware of the consequent risks of use.
•Children must not play with the heat pad.
•Cleaning and user maintenance must not be performed by children
unless supervised.
•This heat pad is not designed for use in hospitals.
•This heat pad is only intended for domestic/private use, not for com-
mercial use.
•Do not insert pins.
•Do not use when folded or bunched up.
•Do not use if wet.
•This heat pad may only be used in conjunction with the controller
specified on the label.
•This heat pad must only be connected to the mains voltage that is
specified on the label.

13
•The electrical and magnetic fields emitted by this heat pad may inter-
fere with the function of a pacemaker. However, they are still well
below the limits: electrical field strength: max. 5000V/m, magnetic
field strength: max. 80A/m, magnetic flux density: max. 0.1 millite-
sla. Please therefore consult your doctor and the manufacturer of
your pacemaker before using this heat pad.
•Do not pull, twist or make sharp bends in the cables.
•If the cable and control of the heat pad are not positioned properly,
there may be a risk of becoming entangled in, being strangled by,
tripping over, or stepping on the cable and controller. The user must
ensure that excess lengths of cable, and cables in general, are safely
routed.
•Please check this heat pad frequently for signs of wear and tear
or damage. If any such signs are evident, if the heat pad has been
used incorrectly or if it no longer heats up, it must be checked by the
manufacturer before being switched on again.
•Under no circumstances should you open or repair the heat pad
(including the accessories) yourself because faultless functionality
can no longer be guaranteed thereafter. Failure to observe this will
invalidate the warranty.
•If the mains connection cable of this heat pad is damaged, it must be
disposed of. If it cannot be removed, the heat pad must be disposed
of.
•When this heat pad is switched on:
– Do not place any sharp objects on it
– Do not place any heat sources, such as hot water bottles, heat
pads or similar, on it
•The electronic components in the controller warm up when the heat
pad is in use. For this reason, the controller must never be covered
or placed on the heat pad when it is in use.
•It is essential to observe the information relating to the following
chapters: Operation, Cleaning and maintenance, Storage.
•If you should have any questions about using our devices, please
contact our Customer Services department.
3. Intended use
CAUTION
This heat pad is only designed to warm up the human body.

14
4. Operation
4.1 Safety
CAUTION
• The heat pad is fitted with a SAFETY SYSTEM. This sensor technology provides protection against
overheating across the entire surface of the heat pad with an automatic switch-off in the event of a
fault. If the SAFETY SYSTEM has switched off the heat pad, the temperature settings are no longer
illuminated when switched on.
• Please note that for safety reasons, the heat pad can no longer be operated after a fault has oc-
curred and must be sent to the specified service address.
• Do not connect the defective heat pad with another control of the same type. This would trigger a
permanent switch-off via the control’s safety system.
4.2 Initial use
CAUTION
Ensure that the heat pad will not bunch up or become folded during use.
• To operate the heat pad connect the control to the heat pad by
plugging in the connector.
• Then plug in the power plug into the mains outlet.
4.3 Switching on
To switch the heat pad on, set the slider for ON/OFF and temperature settings to setting 1, 2 or 3.
The temperature settings are illuminated when switched on.
4.4 Setting the temperature
Level 0: OFF
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat
NOTE:
The fastest way to warm up the heat pad is to initially set the highest temperature setting.
NOTE:
These heat pads have a fast heating function, which allows the pad to warm up faster in
the first 10 minutes.
WARNING
If the heat pad is being used over several hours, we recommend that you
set the lowest temperature setting on the control to avoid overheating
the heated body part, which may lead to burns to the skin.
4.5 Automatic switch-off
This heat pad is equipped with an automatic switch-off function. This turns off the heat sup-
ply approx. 90 minutes after the initial use of the heat pad. The temperature setting display
then starts to flash. So that the heat pad can be switched back on, the slider for ON/OFF and
temperature settings (5) must first be set to setting “0” (OFF). After about 5 seconds it is pos-
sible to switch it on again.
90 min
STOP

15
4.6 Switching off
To switch the heat pad off, set the slider for ON/OFF and temperature settings to setting “0” (OFF). The
temperature settings are then no longer illuminated.
NOTE:
If the heat pad is not in use, switch the side slider for ON/OFF to setting “0” (OFF) and unplug the power
plug from the socket. Then disconnect the control from the heat pad by unplugging the plug-in coupling.
5. Cleaning and maintenance
WARNING
Before cleaning, always remove the power plug from the socket first. Then disconnect the control from
the heat pad by unplugging the plug-in coupling. Otherwise there is a risk of electric shock.
CAUTION
The control must never come into contact with water or other liquids, as this may cause damage.
• To clean the control, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
• Small marks on the heat pad can be removed with a damp cloth and if necessary, with a little liquid de-
tergent for delicate laundry.
CAUTION
Please note that the heat pad may not be chemically cleaned, wrung out, tumble dried, put through
a mangle or ironed. Otherwise the heat pad may be damaged.
• This heat pad is machine-washable.
• Set the washing machine to a particularly gentle wash cycle at 30 °C (wool cycle). Use a delicate laundry
detergent and measure it out according to the manufacturer’s instructions.
CAUTION
Please note that frequent washing of the heat pad has a negative effect on the product. The heat pad
should therefore be washed in a washing machine a maximum of 10 times during its life.
•
Immediately after washing, reshape the heat pad to its original dimensions while it is still damp and spread
it out flat on a clothes horse to dry.
CAUTION
• Do not use pegs or similar items to attach the heat pad to the clothes horse. Otherwise the heat
pad may be damaged.
•
Do not reconnect the control to the heat pad until the plug-in connection and the heat pad are
completely dry. Otherwise the heat pad may be damaged.
WARNING
Never switch the heat pad on to dry it! Otherwise there is a risk of electric shock.

16
6. Storage
If you do not plan to use the heat pad for a long period of time, we recommend that you store it in the original
packaging. For this purpose, disconnect the control from the heat pad by unplugging the
plug-in coupling.
CAUTION
• Please allow the heat pad to cool down before storing. Otherwise the
heat pad may be damaged.
• To avoid sharp folds in the heat pad, do not place any objects on top
of it while it is being stored.
7. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsible for waste disposal.
8. What if there are problems?
Problem Cause Solution
The temperature settings are not illuminated while
- the control is properly connected to the heat pad
- the power plug is connected to a working socket
- the slider is set to 1, 2 or 3
The safety system has
switched the heat pad
off permanently.
Send the heat pad
and the control for
servicing.
9. Technical data
See the rating label on the heat pad.
10. Warranty / service
Beurer GmbH,Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a
warranty for this product, subject to the requirements below and to the extent described as follows.
The warranty conditions below shall not aect the seller’s statutory warranty obligations which
ensue from the sales agreement with the buyer.
The warranty shall apply without prejudice to any mandatory statutory provisions on liability.
Beurer guarantees the perfect functionality and completeness of this product.
The worldwide warranty period is 3 years, commencing from the purchase of the new, unused product from
the seller.
The warranty only applies to products purchased by the buyer as a consumer and used exclusively for per-
sonal purposes in the context of domestic use.
German law shall apply.
During the warranty period, should this product prove to be incomplete or defective in functionality in accord-
ance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge,
in accordance with these warranty conditions.
If the buyer wishes to make a warranty claim, they should approach their local retailer in the first
instance: see the attached “International Service” list of service addresses.

17
Subject to errors and changes
The buyer will then receive further information about the processing of the warranty claim, e.g. where they
can send the product and what documentation is required.
A warranty claim shall only be considered if the buyer can provide Beurer, or an authorised Beurer partner, with
–a copy of the invoice/purchase receipt, and
–the original product.
The following are explicitly excluded from this warranty:
–deterioration due to normal use or consumption of the product;
–accessories supplied with this product which are worn out or used up through proper use (e.g. batteries,
rechargeable batteries, cuffs, seals, electrodes, light sources, attachments and nebuliser accessories);
–products that are used, cleaned, stored or maintained improperly and/or contrary to the provisions of the
instructions for use, as well as products that have been opened, repaired or modified by the buyer or by
a service centre not authorised by Beurer;
–
damage that arises during transport between manufacturer and customer, or between service centre
and customer;
–products purchased as seconds or as used goods;
–consequential damage arising from a fault in this product (however, in this case, claims may exist arising
from product liability or other compulsory statutory liability provisions).
Repairs or an exchange in full do not extend the warranty period under any circumstances.
Order Online From:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au/heating-cooling