Biamp Vidi 100 Operating instructions

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA
W: www.biamp.com
Connecting people through extraordinary audiovisual experiences™
Vidi 100 / 150
Installation and Operation Guide
Contents
Remote
USB Cable
Vidi 100 or Vidi 150
Features
• 4K High Denition
• Full function USB3.0 interface
• 120° wide angle eld of view
• Built in microphone array with noise
suppression
• Reduced 2D / 3D image noise
• Easy installation
• Vidi 150 has smart autoframing
technology

page 2
Vidi 100/150 Install Guide
Installation
1. Mount the camera by placing on a stable at surface or by opening the
stand and clamping the camera on the display/monitor.
Note: The camera can also be mounted to a third party mount utilizing a 1/4"-20
UNC thread. Just unscrew the camera from the attached mount and reinstall on
the new mount.
2. Plug the USB cable into the camera and computer.
Note: A USB 3.0 port must be used. USB 2.0 ports do not meet the bandwidth
and power requirements for the camera. The camera may be plugged into an
extender as long as it uses USB 3.0 standard and supports isochronous data
transfer.
Safety
Electric Safety - Installation and operation must
comply with applicable local electrical safety
standard.
Caution - Avoid stress, vibration or liquid exposure
in transport, storage and installation.
Installation - Mount the camera on a stable smooth
surface (shelf, wall display). The product enclosure
is made from organic material and any contact with
corrosive material should be avoided.
USB Cable
(supplied)

page 3
Vidi 100/150 Install Guide
USB 3.0
USB 3.0 port
Type B
Stand
IR Sensor
Vidi 100/ 150 Features
Lens
Omni-directional
Microphones

page 4
Vidi 100/150 Install Guide
Power / Standby
Camera selection
Preset Reset
F Keys
Arrow keys
Menu
Focus
Backlight
P/T Reset
Return
Home
Zoom
(Slow or Fast)
Left / Right Set
Number Keys
Remote Control
Remote needs (2) AAA batteries (not included)
Remove rear cover, install batteries observing
correct polarity as indicated, and reinstall cover.

page 5
Vidi 100/150 Install Guide
Remote Control Keys
Power/Standby: Toggles normal or standby operation
Camera selection: 1 is default, but the remote can be used to control up to 4
cameras.
Number keys: 0-9 can be used to set or recall a preset
F keys: IR remote control key. (ie [*]+[#]+[F1]: Address 1) (F1 is the default)
Note: Will also toggle a zoom lock function - Press once returns to the home
screen and disables zoom functions. Pressing again enables the zoom functions.
Pressing the F1 key with the Vidi 150 toggles both the Zoom and Autoframing
functions O󰀨 (home) and then back On.
Preset: Sets presets. Press Preset followed by a number key will save the settings to
that number.
Reset: Clears presets. Press Reset followed by a number key will clear the settings
assigned to that number.
Home: Conrms menu selection, enters the sub menu, or return the lens to the
middle (straight on) position after zoom press.
Arrow keys: Navigate through the menu.
After zoom key press: pressing the arrow keys will move the lens in that direction.
Pressing Home returns the lens to the middle position.
Return: Goes back one level on the menu.
Menu: Enters or exits the Menu
Zoom Slow: Pressing the + or – key zooms the camera slowly
Zoom Fast: Pressing the + or – key zooms the camera quickly
L/R Set: Sets direction of the Pan/Tilt
Simultaneously pressing the L/R Set +1 will set the pan/tilt turning direction
Simultaneously pressing the L/R Set +2 will set the direction to go the opposite way
Backlight: Toggles backlight compensation
P/T RST: Resets pan/tilt to factory default.
Focus: Not enabled.

page 6
Vidi 100/150 Install Guide
Menu Settings
MENU
Press [MENU] button to display the main menu on the normal screen. Use arrow
buttons to move the cursor to the item to be set. Press the [HOME] button to select
and enter the corresponding sub-menu.
Note: "SETTING" will only appear in the Vidi 150 menu.
MENU
Color
Setting
Information
Restore Default
Exit
COLOR
From the main menu, move the cursor to [COLOR], and press [HOME] key to select.
Press left/right arrow keys to choose the options
Color menu examples:
COLOR
WB Mode Auto
Return
COLOR
WB Mode Manual
R Gain: 225
B Gain: 175
Saturation: 100%
Hue: 7
Return
Menu Options:
WB-Mode: White balance mode: Auto, Manual.
Adjustment options are only available in Manual mode:
R Gain: Red gain: 0 – 255
B Gain: Blue gain: 0 – 255
Saturation: 60% – 200%.
Hue: 0 – 14.

page 7
Vidi 100/150 Install Guide
SETTING (VIDI 150 ONLY)
From the main menu, move the cursor to [SETTING], and press [HOME] key to
select.
Setting menu example:
SETTING
Tracking On
Return
Menu Option:
Tracking: On, O󰀨, Gradual, Demo
INFORMATION
From the main menu, move the cursor to [INFORMATION], and press [HOME] key to
select.
Information menu example:
INFORMATION
Version 1.0.01
Model Vidi 100
Date 2022-05-01
Return
RESTORE DEFAULT
From the main menu, move the cursor to [RESTORE DEFAULT], and press [HOME]
key to select.
Restore Default menu example
RESTORE DEFAULT
Yes
No
Return
Menu Options:
Yes: Conrm restore factory settings.
No: Cancel restore factory settings.
Note: Press [HOME] button to conrm, all
parameters are set back to factory default,
include IR Remote Address.

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA
W: www.biamp.com
Maintenance
• Use soft cloth or tissue to clean the camera cover.
• Only use a soft dry cloth to clean the lens. If the camera is very dirty, use
diluted non abrasive detergent on a cloth. Do not immerse in water. Do not
use solvents which may damage the surface.
Avoid the following:
• Do not aim at an extreme bright object for a long period of time, such as
sunlight, light sources, etc.
• Do not operate in unstable lighting conditions, image will icker.
• Do not operate close to powerful electromagnetic radiation, such as radio
transmitters, etc.
CONTACT US
Email: [email protected]
Web: support.biamp.com
Warranty: biamp.com/legal/warranty-information
Safety & Compliance: biamp.com/compliance
USB - Works with the following Operating systems
• Windows® 7 (only 1080p and below are supported)
• Windows 8.1, Windows 10 or higher versions
• macOS ™ 10.10 or higher versions
• Google ™ Chromebook ™ Version 76.0.3809.136 or higher
versions
• Linux (support for UVC needed)
• Android
Operating temperature: -10° C - 40°C (14°F - 104°F)
Operation Information
7JUN2022